NUTRIBULLET ultra User manual

User guide
WARNING! To reduce the risk of serious injury, read the User guide
before operating your nutribullet®Ultra. Save these instructions.
Be sure anyone who uses the nutribullet®knows how to do so safely.

2
GENERAL USE AND
SAFETY:
Failure to follow all
instructions regarding
the use of your
nutribullet®Ultra
may result in serious
personal injury, death,
or property damage.
Be aware of possible
hazards when using or
storing your nutribullet®
Ultra.
WARNING!
Important safeguards
When operating your nutribullet®Ultra, remember:
SAFETY COMES FIRST.
Warning! To avoid the risk of serious injury, death, property
damage or damage to your device carefully read all instructions
before operating your nutribullet® Ultra. When using any electrical
appliance, basic safety precautions should always be observed,
including the following important information. READ CAREFULLY
AND THOROUGHLY BEFORE OPERATING.
If you let anyone else use your nutribullet®Ultra, make sure that
they understand the health and safety information in this User
Guide, as well as any additional safety or usage instructions
provided. Each person using a device should completely read the
User Guide and become familiar with the safe operation of the
unit.
Save these instructions!
FOR HOUSEHOLD USE ONLY
• NEVER blend hot,
warm, or carbonated
beverages. This may
pressurize contents,
causing them to
erupt upon opening,
which can result in
serious bodily injury or
property damage.
• Do not use this blender
for anything other than
its intended use.
• Close supervision is
necessary when any
appliance is used by or

3
near children to ensure
they do not play with
the appliance. Keep
cord out of reach of
children.
• This appliance is not
intended for use by
persons (including
children) with reduced
physical, sensory, or
mental capabilities, or
lack of experience and
knowledge, unless they
are closely supervised
and instructed
concerning use of the
appliance by a person
responsible for their
safety.
• NEVER LEAVE THE
NUTRIBULLET®
UNATTENDED WHILE IT
IS IN USE.
• Do not place your
nutribullet®blender
on uneven or unstable
surfaces.
• Do not operate if the
Motor Base, Cup, or
blade are damaged in
any manner.
• Use only genuine
nutribullet®
attachments/accessories
specifically designed
for your nutribullet®
Ultra blender.
Aftermarket parts are
not made to nutribullet®
specifications and may
damage your unit or
cause serious injury.
• The risk of fire, shock or
damage to nutribullet®
Ultra during cleaning
can be reduced by
taking the following
precautions:
- Unplug and turn your
device o before
cleaning.
- Only clean the exterior
of your device.
- Clean your device with
a dry cloth.
• Do not attempt to clean
by immersing in water
or other cleaning liquids.
Only gently wipe and
dry with a clean cloth.
• Do not place any of
the nutribullet®Ultra
parts in a microwave,
conventional oven, air
fryer or stovetop pot,

4
or immerse in boiling
water, as this will
damage the part.
• NEVER use the sanitize
or heat cycle on any
nutribullet®part or
accessory. This may
cause warping and
possibly hazardous
conditions.
• NEVER place a
nutribullet®Cup in the
freezer or use the Cup
as a storage container
in the freezer.
• Make sure your
nutribullet®Ultra is
powered o and the
motor and blades are
completely stopped
before removing or
cleaning unit.
• DO NOT USE
OUTDOORS.
• ALWAYS UNPLUG THE
NUTRIBULLET®WHEN
NOT IN USE.
AVOID HEATING AND
OVER-PRESSURIZING
CUP:
NEVER blend hot,
warm, or carbonated
ingredients or liquid
in the nutribullet®
Cup! Such use may
over-pressurize the
nutribullet®Cup,
causing the Cup to
separate violently when
removed from the
Motor Base or opened,
which may result in
bodily injury from the
hot contents or exposed
blades.
• DO NOT blend hot or
warm ingredients.
- Starting with hot or
warm ingredients
allows more heat
and pressure to build
inside the Cup when
blending. This may
cause the Cup to
separate, expelling
hot contents or
exposing the blade,
both of which may
cause injury.
WARNING!

5
- Only blend room-
temperature
or refrigerated
ingredients (21°C or
cooler).
• DO NOT blend for
more than one minute.
- Blending causes
ingredients to heat
up, which builds
pressure in the Cup
over time. Continuous
blending for more
than one minute may
cause the Cup to
separate, exposing
the blade, or expel
heated contents,
causing injury.
- DO NOT run for more
than 6 consecutive
30-second intervals to
prevent the contents
from overheating
and pressurizing.
Allow contents to
settle at least 10 to 15
minutes after running
multiple consecutive
extraction cycles. DO
NOT attempt to open
the Cup if it feels hot
or warm to the touch.
See Cup Caution
section for details.
• DO NOT blend
anything carbonated
or eervescent — no
bubbles.
- Carbonated and
eervescent
ingredients (e.g.,
soda, baking powder,
baking soda, yeast,
some batters, cake
mix, dry ice, or other
things that become
bubbly) release
gasses that increase
pressure. Pressure
from released gases
can cause a sealed
nutribullet®Cup to
burst, resulting in
possible injury and/or
property damage.
Note: Some protein
powders include
eervescent
ingredients. Always
check the ingredients
of all supplements
before adding.

6
• DO NOT overfill.
- Filling above the
MAX line can result
in leakage. The
cyclonic action of
the nutribullet®
requires space to
extract eectively.
Exceeding the MAX
line can result in
leakage and may
create a dangerous
pressurization which
can cause the Cup
and Rapid Extractor
Blade assembly to
separate.
• DO NOT leave blended
foods inside sealed
Cup.
- Blended mixtures can
spoil and ferment,
increasing pressure
when left inside the
Cup.
- Use the To-Go Lid or
transfer to another
container for storage
after blending.
CUP CAUTION:
NEVER attempt
to open a sealed
nutribullet®Cup if it
feels hot or warm to
the touch. The contents
may be heated and
pressurized, which
can cause the Cup to
violently separate when
opened, potentially
resulting in bodily
injury. If the Cup feels
hot or warm, take the
following steps:
1. LEAVE ALONE, DO
NOT OPEN. Leave the
Cup where it is and do
not touch it or allow
another individual to
touch. DO NOT attempt
to disengage the Cup
from the Motor Base or
separate the Cup from
the Rapid Extractor
Blade by applying heat,
force, or prying apart
the components, which
may crack or shatter
the Cup and result in
bodily injury.
2. Do not continue to
blend.
WARNING!

7
3. Allow the Cup to cool
for at least 30 minutes.
4. After 30 minutes, check
if the Cup is completely
cooled. If still warm,
allow to cool more.
5. If cool to the touch,
slowly disengage the
Cup from the Motor
Base.
6. With the Cup pointed
away from your face
and body, use a towel
to slowly untwist the
Cup from the Rapid
Extractor Blade and
gently release any
residual pressure.
If you are still unable to
remove the Cup from
the Rapid Extractor
Blade, contact
Customer Service.
If you are unable to
untwist the Cup from
the Rapid Extractor
Blade, NEVER leave
the sealed contents out
for a prolonged period
of time. The contents
may ferment causing
the Cup to violently
WARNING!
separate, which can
result in in bodily injury
or property damage.
Dispose of the Cup and
contents properly so
you or others will not be
injured if fermentation
causes the Cup to
separate.
CUP SAFETY:
Always make sure the
Cup is securely locked
on the Motor Base
before blending. The
motor will not turn on
unless the Cup is set in
the locked position.
• Do not exceed the MAX
line. Exceeding the
MAX line can result in
leakage.
• Do not remove the
Cup while the unit is in
operation.
• Periodically inspect
your nutribullet®Ultra
blender components
for damage or wear
that may impair proper
function or create a
safety hazard.
WARNING!

8
• NEVER operate your
nutribullet®Ultra if the
Cup is empty.
• Do not overfill Cup
with ice. Always
use sucient liquid
ingredients when
blending.
• Do not place on the
bottom rack or use
the heat/sanitize cycle
of your dishwasher to
wash the Cup or To-Go
Lids.
• Cups and To-Go Lids
are NOT microwave
safe.
• Do not use the Cup if
you detect cracking,
cloudiness, or other
damage. You may
purchase new Cups at
nutribullet.com or by
contacting Customer
Service.
• Do not use the Rapid
Extractor Blade as
a storage lid as the
blended mixture can
ferment, increasing
pressure within the
Cup that may cause
the Cup and blade to
separate, potentially
resulting in bodily injury
and property damage.
Use the To-Go Lid or
transfer to a vented
container for storage
after blending.
RAPID EXTRACTOR
BLADE SAFETY:
BLADES ARE SHARP!
HANDLE WITH CARE
TO AVOID BODILY
INJURY. Non-food items
or hard ingredients
may damage the
blades. Routinely
inspect the blades
and discontinue
use if damaged.
Continued use with
a damaged blade or
use inconsistent with
these instructions may
result in bodily injury,
property damage, or
damage to your unit.
• Do not touch the sharp
edges of the blades. To
avoid laceration injury,
do not handle or touch
any blade edge.
• NEVER store any
WARNING!

9
exposed Rapid
Extractor Blade in the
Motor Base unattached
to a nutribullet®Cup.
An exposed blade can
present a laceration
hazard.
• ALWAYS securely
tighten the Rapid
Extractor Blade to the
Cup to prevent leakage.
• Do not attempt to
disengage the Cup
from the Motor Base if
the Cup starts to leak
during blending. Allow
the motor to come to a
complete stop before
removing the Cup.
• Do not crush ice. Your
nutribullet®Ultra is not
intended to be used as
an ice crusher.
• Do not leave any
non-food items in the
Cup when blending.
Remove all utensils
from the Cup.
• Do not blend stone fruit
in this appliance unless
pits/seeds have been
removed. Fruit pits
may damage the Cup,
potentially resulting in
shattering and personal
injury. In addition,
apple seeds and the
pits of cherries, plums,
peaches, and apricots
contain a chemical
known to release
cyanide into the body
when ingested.
• DO NOT USE the Rapid
Extractor Blade for
grinding dry ingredients
such as grains, cereal,
or coee, as this may
damage the motor and/
or the blade.
• Do not remove the
Cup until blades have
come to a complete
stop. Removing before
the blades come to
a complete stop can
cause damage to the
Rapid Extractor Blade
coupling or motor gear.
• Always POWER OFF
and UNPLUG the unit
when assembling,
disassembling,
changing accessories,
or cleaning.
• Do not overload the
Cup by exceeding the