NUTRICHEF NCHDMK2 User manual

www.NutrichefKitchen.com
NCHDMK2
Electric Hot Dog Machine
Hot Dog Steamer and Bun Warmer
To use this hot dog machine properly and safely, please read the following
instructions carefully.
1. Always operate NCHDMK2 from an earthed domestic
220-240V 50Hz power socket.
2. Close supervision is necessary when any appliance is
used by or near children. Never operate this appliance
unattended.
3. Do not use a damaged power plug, power cord or
loose power outlet in order to avoid electric risk.
4. DO NOT PUT the cord under the carpet, blankets.
Always keep the power cable away from walkway in room.
5. To prevent overload and blown fuses, be sure that no other appliance is plugged
into the same outlet (receptacle) or into another.
6. Ensure the hot dog machine is placed on a stable, secure surface to eliminate the
possibility of tipping over or avoid any water in the appliance.
7. DO NOT OPERATE this machine near water sources or ammable liquids
8. DO NOT OPEARTE this machine on or near any hot surface
9. To prevent the risk of electric shock, do not put the machine or power cord and
plug into the water or any liquids.
10. Use of an extension cord is not recommended as it may overheat and cause risk
of re.
11. When you have nished using the machine, turn the switch to “MIN” position
and unplug it from the socket. Wait until the appliance is completely cool down
before moving or cleaning.
12. Make sure the plug connects with the power socket in good condition, if it is
need to change. All repair works must be made by a professional (authorized
distributor). NEVER TRY TO REPAIR the cable or plug by yourself.
Please take the damaged set to your local authorized maintenance center
13. This hot god machine only suite for indoor use.
14. When using the hot dog machine, do not put the food into the water plate
directly, it must placed into the basket.
15. The water plate must put into water when using this hot dog machine.
16. The appliance surfaces are liable to get hot during use.

www.NutrichefKitchen.com
PREPARATION BEFORE USE
1. Check that the voltage marked on the product corresponds with your supply
voltage. Ensure the controller is in “OFF” position before plugging in.
2. Do not use it on damp or wet surface or near water.
3. When using this hot plate for the rst time, there may be a smell of smoke coming
from the surface of the heating element. This is normal because of the invisible
protective coating in production.
Operation
1. Put the hot dog machine on a balance surface，put the water into the water plate,
and the water should not exceed 80% of the water plate.
2. Fix the glass cylinder on the water plate and put the food into basket, then put
the basket into the glass cylinders carefully then put on the cover.
3. Connect to the power supply socket. Turn the switch from “MIN” to “MAX”
position and the indicator light is on for working, the hot dog machine is in a
state of heating.
4. After using the NCHDMK2, turn the switch to “MIN”perdition and unplug it from
the socket.
WARNING
1. This appliance is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
4. The temperature of accessible surface may be high when the appliance is operating.
MAINTENANCE & CARE
1. Make sure the plug is removed from the power supply socket. After the hot dog
machine set is completely cooled down, clean it with the mild cleaner or gel-like
cleaner by using soft cloth.
PLEASED DO NOT CLEAN THE SET WHEN IT IS STILL HOT.
2. DO NOT USE hard brushes, scratchy materials and/or alcohol, petrol or any
organic cleaner for the cleaning purpose
3. Except the removable water plate, basket, glass cylinder, do not immerse the
main body in water to clean.

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]
www.NutrichefKitchen.com
NCHDMK2
Electric Hot Dog Machine
Hot Dog Steamer and Bun Warmer
Features:
• Professional Hot Dog Steamer
• Used For Both Cooking and Keeping Warm
• Low Power Consumption
• Easy to Clean
• Integrated Tank Divider to Separate Heating and Cooked Product
• Stainless steel cover with plastic handle
• Glass cylinder
• Stainless steel wire cage and rack
• Stainless steel water tray
• 2 aluminum bars for warming up buns or bread
• Heating Temperature Control via a Thermostat Knob
• Power On/O Switch
• Stainless Steel Cooking Hot Plate-Base
Technical Specs:
• Material: Stainless Steel; Glass Cylinder
• Power Consumption: 120V - 50Hz, 420W
• Capacity: Up to 8 Hot Dogs At A Time
• Water Tray Temperature Range: 73.4-208.4°F (923-98°C)
• Aluminum Hot Plate-Base Temperature Range: 248-338°F (120-170°C)
• Product Dimension (L x W x H): 14.65’’ x 13.23’’ x 13.88’’ - inches