NTSC
CD-ST21N • CD-STD21N
CD-ST21N
NTSC
1/3” CCD
580 TV Lines
No
Vari-focal 2.8mm-10mm
131.6°(W) ~ 35.6°(T)
Internal
768(H) x 494(V)
525 Lines. 2:1 Interlaced
1/60 ~ 1/100,000 sec.
1.0 Vp-p Composite, 75 ohm
1.0 Vp-p Composite, 75 ohm
0.1 Lux (DSS Off), 0.001 Lux (On)
More than 50dB (AGC Off)
OSD Menu
CD-ST21N
23ºF ~ 113ºF (-5ºC ~ +45ºC)
Within 90% RH
4W / 500mA
12VDC/24VAC Dual Voltage
Technical Specications
Video Format
Image Sensor
Horizontal Resolution
Day/Night Functionality
Lens Type (DC Auto Iris)
Angle of View
Sync System
Effective Pixels
Scanning System
Electronic Shutter
Main Video Output
Service Monitor Output
Minimum Illumination
S/N Ratio
Camera Control & Setup
General Information
Operating Temperature
Operating Humidity
Power Consumption
Input Voltage
TECHNICAL SPECIFICATIONS
*specications are subject to change without any prior notice.
EasyView™2 Series
SIE II, High Resolution 580 TV Lines, Indoor Dome Camera
DIMENSIONS Unit: mm
CD-STD21N
Yes w/ ICR
0.01 Lux (DSS Off), 0.0001 Lux (On)
CD-STD21N
S.I.E. 2 - our second generation ‘Super Image Enhancer’ module enhances the
clarity and color accuracy of its predecessor by further rening our proprietary DSP
technology. This new unique video processing technology radically enhances the
low light performance of the EasyView™ 2 dome camera by utilizing super low
light features such as DSS, DNR, Super BLC, AWB, and BMB, delivering excellent
picture quality and higher resolution at 580 TV Lines.
BENEFITS OF THE EASYVIEW™ 2 CAMERAS w/ EZ-COAX™
BMB - Brightlight Masking Block
The EasyView™ 2 dome cameras incorporates many of
the traditional BLC (Back Light Compensation) modes,
but adds a new sophisticated form of BLC that literally
blocks out the excessively bright areas within a frame
and compensates the rest accordingly allowing for the
otherwise “would be” overexposed areas of the frame to
be viewable.
EZ-Coax™ - NUVICO Up-the-Coax Telemetry Control
Usually found in high-end PTZ cameras, this hi-tech transmission method allows
access to the camera menu using only the coaxial cabling already running from
the camera. The EZ-Coax™ Transceiver can then be used to gain telemetry control
of the camera without running a separate communication line. This not only cuts
down on installation cost and time, also makes all future maintenance simple and
easy.
KEY FEATURES
• 1/3” CCD Sensor
• 580 TV Lines
• 2.8~10mm, DC Auto Iris Lens
• Day/Night Functionality with ICR (CD-STD21N Only)
• EZ-Coax™: NUVICO Up-the-Coax Telemetry Control (Optional)
• Digital Noise Reduction: DNR
• Auto Tracking White Balance: AWB
• Brightlight Masking Block: BMB
• Separate Camera Control Board
- OSD Menu
- Service Monitor Output
• 12VDC/24VAC Dual Voltage
CONSTRUCTION
• 4” Polycarbonate Bubble
• 3-Axis Gimbal
• Flush Mount Housing w/ Surface Mount Plate in a Single Package
• Aluminum Mounting Accessories (Optional)
• Ivory or Black Plastic Housing (Optional)
• Compact Size
AVAILABLE MODELS
• CD-ST21N-I (Ivory) - High Resolution
• CD-ST21N-B (Black) - High Resolution
• CD-STD21N-I (Ivory) - True Day/Night w/ ICR
• CD-STD21N-B (Black) - True Day/Night w/ ICR
OPTIONAL: EZ-COAX™
• For all NUVICO cameras with EZ-Coax™ system,
add the following underlined extensions: CD-00000-CX
AVAILABLE ACCESSORIES
• CA-SMC30: Service Monitor Cable
• CV-WM: Indoor Wall Mount
• CA-OM: Outdoor Wall Mount
• CA-PM: Pedestal Mount
• CA-CMB: Corner Mount Bracket
• CA-PMB: Pole Mount Bracket
• CA-JB: Junction Box
• CA-JB2: Multipurpose Junction Box Enclosure
• EZ-CX1T: 1ch EZ-Coax™ Transceiver with built-in control buttons
• EZ-CX8T: 8ch EZ-Coax™ Transceiver (Requires CK-1000 for operation)
