NXP Semiconductors CES-i.MX6Q User manual

深圳市海天雄电子有限公司
Shenzhen Haitianxiong Electronic Co., Ltd.
CES-i.MX6Q
Product Manual
NXP Development Platform
Rev. V1.0
Date：2016-10-14
www.nrisc.com

NXP Development Platform CES-i.MX6Q Product Manual
1 www.nrisc.com
Introduction
I.MX6Q processor was developed by NXP, which was based on the Cortex-A9 architectur processor. With a
strong multimedia capabilities, large capacity storage devices, meet the stability and precision characteristics for
the civil, consumer, industrial, automotive electronic, is the current high-end products in the field of embedded
processors.
Based on the characteristics of i.MX6Q processor, CES-i.MX6Q development platform draws out the
processor’s functional interface to demand the different areas, and shows rich resources and powerful processing
capacity, which can be used as the master control module for any intelligent display, wireless communications,
cable connection. CES-i.MX6Q draws out the camera interface, LVDS interface, HDMI interface and VGA interface,
which shows the powerful multimedia performance and achieve amazing effect of user experience. The Platform
supports RS232 and RS485 communication serial ports, SPI, CAN, I2C bus interface and gigabit Ethernet, easily
used in cable, wireless connection, and precise control. In addition, CES - i.MX6Q development platform supports
4G (Full CNC), WIFI、Bluetooth、GPS、Camera modules.
With the stability of the system design, rich peripheral interface, powerful processing performance, open
source code, CES-i.MX6Q development platform can directly applied in consumer electronics, automotive
electronics, industrial control and other different areas, and its high cost performance makes the platform have
high competition in the similar products. To meet the needs of different areas, the core board of CES-i.MX6Q
development platform adopts array board, convenient plug and long cycle. User can cut the system function
according to the specific needs and design a special control module in accordance with their characteristics.
Features
NXP Cortex-A9 i.MX6Q processor；
Built-in 1GB DDR3 memory and 8GB eMMC storage；
Support 10.1 inch LVDS（1280*800）HD display and 7 inch RGB resistance screen；
Support 4G(Full CNC ) WIFI、Bluetooth、GPS、Camera；

NXP Development Platform CES-i.MX6Q Product Manual
2 www.nrisc.com
Support Linux3.0.35、Android4.4.2 operating system；
Rich resource and meet demands of different area.
Function Interface
Core Board
WIFI / BT
COM3
USB SERIAL
eMMC
DDR3
Freescale i.MX6Q
DDR3
Headphone
MIC
COM4
SPI
DC JACK
SWITCH
SD Card
SIM Card
GPS
UART
PMIC

NXP Development Platform CES-i.MX6Q Product Manual
3 www.nrisc.com
Hardware Parameter
CPU
NXP Cortex-A9 i.MX6Q，Main frequency 1GHz
RAM
1GB DDR3
eMMC
8GB eMMC
PMIC
MMPF0100F0ZES chip
GPU
VivanteGC355，VivanteGC320
Core Board
Connection way
Array board
4G
Quectel EC20，CNC
WiFi & Bluetooth
RL-UM02WBS-8723VAU
GPS
LW1613
Camera
OV3640，3million pix
Ethernet
1*Gigabit Ethernet，RJ45
AUDIO
1*I2S
I2C
2
SPI
1*SPI
CAN
1*CAN Bus Interface
RS485
1*RS485
SD/MMC/SDIO
2（1 with SD/MMC）
USB HOST
2*USB HOST interface，support USB 2.0
UART
4*UART
HDMI
1*HDMI
LCD
Support 10.1 inch LVDS（1280*800）HD display and 7inch RGB display
PWM
1，for debugging backlight
VGA
1*VGA

NXP Development Platform CES-i.MX6Q Product Manual
4 www.nrisc.com
SATA
1*SATA
RTC
Real-time clock
Button
5
Software Parameter——Linux 3.0.35
Operating system
Linux 3.0.35
System boot program
U-boot2008.09
Cross compile tool
arm-fsl-linux-gnueabi-gcc-4.6.2，i.MX6 special ARMv7，support Hard-float
operation
System file format
EXT4/NFS/FAT32
4G drive
Support web browsing, sending and receiving text messages, to provide the source
code
WIFI & BT drive
Support 802.11b/g/n，provide the source code
GPS drive
Support SIF III global location，provide the source code
Camera drive
Support OV3640，provide the source code
Ethernet drive
support Gigabit Ethernet，provide the source code
VGA drive
HD display，provide the source code
SATA drive
support SATA，provide the source code
AUDIO drive
WM8962 mother，using I2S communication，provide the source code
UART drive
Support 4* serial communication，provide the source code
LCD drive
Support 10.1 inch LVDS（1280*800）HD display and 7inch RGB display，provide the
source code
TOUCH drive
GT92X，support single point capacitive touch，provide the source code
SD/MMC drive
Support high speed of MMC and SDIO，provide the source code
USB OTG drive
HOST/Device drive，Device supports ADB, provide the source program
USB HOST drive
HOST，support mouse、keyboard、U disk and Bluetooth and other USB devices，
provide the source code

NXP Development Platform CES-i.MX6Q Product Manual
5 www.nrisc.com
eMMC drive
Support 8G，provide the source code
IO drive
External interface control, to provide the source code
I2C drive
Used for touch screen, camera peripheral, and leads to the interface, provide the
source code
SPI drive
leads to the external interface, provide the source code
User Button
4 can control the volume, etc., to provide the source code
Watchdog
Guarantee the system stability, to provide the source code
PWM control drive
control backlight , provide the source code
Software Parameter——Android 4.4.2
Operating system
Android 4.4.2
System boot program
U-boot2009.08
Kernel version
Linux 3.0.35
Cross compile tool
gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.gz
Serial debugging
tools
Minicom terminal
System file format
EXT4
4G drive
Support web browsing, sending and receiving text messages, to provide the source
code
WIFI & BT drive
Support 802.11b/g/n，provide the source code
GPS drive
Achieve the positioning data collection and reception
Camera drive
Support OV3640，provide the source code
Ethernet drive
support Gigabit Ethernet，provide the source code
VGA drive
HD display，provide the source code
SATA drive
support SATA，provide the source code
AUDIO drive
WM8962 mother，using I2S communication，provide the source code
UART drive
Support 4* serial communication，provide the source code

NXP Development Platform CES-i.MX6Q Product Manual
6 www.nrisc.com
HDMI drive
HDMI HD display，provide the source code
LCD drive
Support 10.1 inch LVDS（1280*800）HD display and 7inch RGB display，provide the
source code
TOUCH drive
GT92X，support multi point capacitive touch，provide the source code
SD/MMC drive
Support high speed of MMC and SDIO，provide the source code
USB OTG drive
HOST/Device drive，Device supports ADB, provide the source program
USB HOST drive
HOST，support mouse、keyboard、U disk and Bluetooth and other USB devices，
provide the source code
eMMC drive
Support 8G，provide the source code
IO drive
External interface control, to provide the source code
I2C drive
Used for Audio、Camera、HDMI、PMIC, provide the source code
SPI drive
leads to the external interface, provide the source code
User Button
4 can control the volume, etc., to provide the source code
Watchdog
Guarantee the system stability, to provide the source code
PWM control drive
control backlight , provide the source code
RTC drive
Support real-time clock function
PMIC
Support wake-up function
CAN drive
CAN communication, provide source code
RS485 drive
RS485 communication, provide source code

NXP Development Platform CES-i.MX6Q Product Manual
7 www.nrisc.com
Package List
Development Platform
（expanding board+Core
board）
User CD
Serial line
Touch pen
Cable
10.1 inch LVDS HD display
USB line
7 inch RGB resistance
display
（option）
Power Adapter
Camera（Optional）
SD card（Optional）
4G module（Optional）

NXP Development Platform CES-i.MX6Q Product Manual
8 www.nrisc.com
Service Support
Technician contact information：
TEL：[phone] 86325376 26401175 26401176
FAX：[phone]
E-mail：[email protected]
Working Time：
Monday-Friday：9：00～12：00，13：30～18：00
Statement
This introduction Information is only for users’ reference，without prior notice for the necessary amendment.
More product information, please visit www.nrisc.com
Shenzhen Haitianxiong Electronic Co., Ltd. (Headquarters)
ADD：5th Floor, A7 Building, Nanshan i park, No.1001, Xueyuan Road, Nanshan District, Shenzhen, China.
TEL：[phone] 86325376
E-mail：[email protected]
URL：www.nrisc.com
Shenzhen Haitianxiong Electronic Co., Ltd. (Chengdu Branch)
ADD：19th Floor, NO.88, Bolck C AVIC International Plaza, Jiaozi Road, High-tech Zone, Chengdu, Sichuan, China
TEL：[phone]
E-mail：psu[email protected]