OCULUS Go Service manual

Guide for setting up the Oculus Go with the VirtualSpeech app
Setting up the VR headset
1. Plug the charging cable into your Oculus Go headset and the other end into a power
source to begin charging it. The charging indicator will turn green when it is fully
charged.
2. Download and open the Oculus app on your iPhone or Android phone. (Download
link here: https://support.oculus.com/183135912238400/)
3. Follow the on-screen instructions to connect your phone to your headset and your
headset to your Wi-Fi network.
4. Continue with the on-screen instructions to pair your controller with your headset.
Downloading the VirtualSpeech app
1. Put on your Oculus Go headset
2. In the main menu, press the Search button and type in “virtualspeech” using the
virtual keyboard

3. Download the app
Enter a code in the VirtualSpeech app
1. Open the VirtualSpeech app
2. Press the “Enter Code” button (located in the app main menu)

3. Enter your email address and app code provided
4. A download will begin, after which you can access the new VR scenarios in the “My
Unlocked VR Training” panel.

Oculus Go controller
The VirtualSpeech app uses two buttons to navigate around:
•Trigger - this is at the back of the controller. Use this to activate buttons and enter
rooms - point at the room or action you want to take and then press the trigger
button.
•Back Button - the first button of the two at the top of the controller. Press this to
return to the main menu.
Turning off your Oculus Go
With your headset on:
•Press and hold the power button until you see a shut-down menu in VR.
•In the shutdown menu, select Power Off.
With your headset off:
•Press and hold the power button for 10 seconds.
Oculus support link: https://support.oculus.com/183135912238400/