OEM Tools 24910 Service manual

UNPACKING
After unpacking the unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with the carrier.
DO NOT use the OEMTOOLS™ Garage Counter Stool if
broken, bent, cracked or damaged parts (including labels)
are noted. Any Counter Stool that appears damaged in
any way, operates abnormally or is missing parts should
be removed from service immediately. If you suspect that
the Counter Stool was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
Operating Instructions and Parts Manual 24910/24910TWO
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
[email protected]
Thank you very much for choosing an OEMTOOLS™Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS™cannot be responsible for issues
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
NOTES:Provide clarity and helpful information.
GARAGE
COUNTER STOOL
1
8/18
2018 OEMTOOLS™
PRODUCT DESCRIPTION
The OEMTOOLS™ Garage Counter Stool is ideal for shop or garage use. It is designed
with a durable, 5" thick foam pad for comfort and matte black finish frame.
PRODUCT SPECIFICATIONS
30.5" High x 14" Across
Figure Description Qty.
1
Wrench 1
2Allen Wrench 1
3Sleeved Allen Head Screws 8
4Nuts and Bolts 4
5Machine Screws 4
6Shims 4
7Stool Legs 2
8Swivel Base 1
9Stool Pad 1
10 Inner Support Ring 1
11 Outer Support Ring/Foot Rest 1
24910
1 Garage
Counter Stool
24910TWO
2-Pack Garage
Counter Stools
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定

2
Operating Instructions and Parts Manual 24910/24910TWO
8/18
2018 OEMTOOLS™
GARAGE
COUNTER STOOL
ASSEMBLY
Step 1: Place the two legs together
as shown in the image above.
Step 2: Slide the larger ring over
the legs and align the holes. Slide
the sleeved Allen head screw into
the hole through to the other side
and tighten down using the supplied
Allen wrench. Repeat for the other
holes. Slide the support ring inside
the legs and repeat the steps for
attaching the larger ring.
Step 3: Place the swivel plate on
top of the legs and align the holes.
Insert the bolts and securely screw
on the nut. Repeat for the remaining
holes.
Step 4: Turn the stool over and
bolt the seat base to the pad as
shown in the image above. Repeat
for the remaining holes.
NOTE:If the stool legs are
uneven, insert the shim provided
between the foot pad and the stool
leg to level the stool.
NOTE:Not all components of the Stool are replacement items, but
are illustrated as a convenient reference for location and position
in the assembly sequence. The manufacturer and/or distributor
have provided the parts list and assembly diagram in this manual
as a reference tool only. Neither the manufacturer nor distributor
makes any representation or warranty of any kind to the buyer that
he or she is qualified to make any repairs to the product, or that he
or she is qualified to replace any parts of the product. In fact, the
manufacturer and/or distributor expressly states that all repairs and
parts replacements should be undertaken by certified and licensed
technicians, and not by the buyer. The buyer assumes all risk and
liability arising out of his or her repairs to the original product or
replacement parts thereto, or arising out of his or her installation of
replacement parts thereto.
OEMTOOLS™ LIMITED LIFETIME WARRANTY
For as long as you own this OEMTOOLS™ product, if you find any defect in
material or workmanship through normal usage and not including standard
wear, return it to the place of purchase or send it to OEMTOOLS™ for repair
or replacement at our discretion. In order to obtain this service, send your
stool and proof of purchase (transportation pre-paid) to OEMTOOLS™ Q.A.
Dept., 3580 E. Raines Rd. #3, Memphis, TN 38118. This warranty gives
you specific legal rights, and you may also have other rights, which vary
from state to state. We will not be responsible for lost or damaged goods
during transportation; please insure your package. If our inspection verifies
the defect, we will either repair or replace the product, or we may elect to
refund the purchase price if we cannot readily and quickly provide you with
a replacement. We will return repaired products at our expense, but if we
determine there is no defect or that the defect resulted from causes not
within the scope of our warranty, then you must bear the cost of returning
the product.
OEMTOOLS™ does not provide warranty for products labeled other than
OEM®or OEMTOOLS™. OEMTOOLS™ will not provide any warranty
for products subjected to abnormal use. Abnormal use includes (but is
not limited to) abuse, accident, alteration, neglect, and unauthorized or
unreasonable use or repairs. This warranty does not cover bits, blades,
files, batteries, or calibration. We recommend that you maintain your tools
and sharpen or replace blades, bits, files, and batteries as necessary.
OEMTOOLS™ reserves the right to make any changes in construction or
design at any time without any obligation in incorporating such changes to
tools or equipment previously sold.
OEMTOOLS™ makes every effort to ensure that its products meet high
quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for
the period of one year from the date of purchase. This warranty does not
apply to damage due directly or indirectly to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity,
improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or
for incidental, contingent, special or consequential damages arising from
the use of our product. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS. This warranty gives you specific legal
rights, and you may also have other rights, which vary from state to state.
Don’t forget to register your new OEMTOOLS™ product at
www.oem-tools.com.
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定
彜
尺寸A4
128G
数量未定
CONTACT US
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: [phone]
www.oem-tools.com