OEM Tools 24911 Service manual

UNPACKING
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit. Check
for loose, missing, or damaged parts. If any damage is
observed, a shipping damage claim must be filed with
the carrier. DO NOT use the OEMTOOLS™ Adjustable
Hydraulic Shop Stool if broken, bent, cracked or
damaged parts (including labels) are noted. Any Shop
Stool that appears damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Shop Stool
was subjected to shock load (a load that was dropped
suddenly, unexpectedly, etc.), immediately discontinue
use until it has been checked by a factory authorized
service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
Operating Instructions and Parts Manual 24911/24911TWO
Thank you very much for choosing an OEMTOOLS™Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS™cannot be responsible for issues
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
ADJUSTABLE HYDRAULIC
SHOP STOOL
1
8/18
2018 OEMTOOLS™
PRODUCT DESCRIPTION
The OEMTOOLS™ Adjustable Hydraulic Shop Stool is ideal for shop or garage use. It is designed with a durable,
vinyl-padded swivel seat and backrest for comfortable support.
PRODUCT SPECIFICATIONS
Adjustable Height: 29" to 33"
24911
1 Adjustable
Hydraulic Shop
Stool
24911TWO
2-Pack Adjustable
Hydraulic Shop
Stools

Operating Instructions and Parts Manual 24911/24911TWO
ADJUSTABLE HYDRAULIC
SHOP STOOL
ASSEMBLY
A
B
C
DE
F
G
H I J
KL
STEP 1
Attach the legs
to the center hub
with screws (K).
Assemble the
round plate to the
hub with bolt (K).
STEP 2
Attach the upper
ring with bolt (J).
STEP 3
Attach the footrest
ring with bolt (J).
STEP 4
Slide the backrest
tube into the seat,
fasten with bolts (L).
STEP 5
Slide the backrest
into the tubes until
knobs lock in place.
STEP 6
Slide the pneumatic
cylinder into the
center hub and seat.
NOTE:Not all components of the Stool are replacement items, but are illustrated as a convenient reference for
location and position in the assembly sequence. The manufacturer and/or distributor have provided the parts list
and assembly diagram in this manual as a reference tool only. Neither the manufacturer nor distributor makes any
representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or
that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly
states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and
not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or
replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
PARTS DIAGRAMPARTS LIST
A
B
C
DE
F
G
H I J
KL
Figure Description Qty.
A
Backrest 1
BSeat 1
CPneumatic
Cylinder 1
DCenter Hub 1
ERound Plate 1
FLeg 4
GTube 2
HUpper Ring 1
IFootrest Ring 1
JBolt and Nut (Hex) 8
KBolt and Nut 4
LSmall Bolt 2
Learn more about equipment storage solutions we have.