OfficeSource 602MMFBK User manual

OFFICESOURCE.COM
MODEL NO. 602MMFBK/603MMFGT
ASSEMBLY INSTRUCTIONS
Model#: 602MMFBK/603MMFGT
Name: Oslo
Description: Mid-Back Mesh Task Chair
Color: Black/Light Gray
Assembly Instructions &User manual
Please read the instruction sheets completely before assembly.
Assembly Notes
1.After opening the carton, please carefully check for missing parts
and transportation damage and if needed, contact dealer immediately.
2.Once installed, the gas lift will be difficult to remove. It is not
recommended to remove the lift to avoid damage to other parts of
the chair.
3.Contact dealer if disassembly assistance is needed.
Usage Notes
1.Intended for use indoors.
2.Intended for single person use.
3.Do not sit on end of chair to avoid accidental tipping and injury.
4.Do not step or stand on the chair –chair is intended for sitting only.
5.Use caution when reclining, especially as tension is reduced by user.
6.Do not lean against product –chair is intended for sitting only.
7.Avoid contact with sharp objects, heavy tools, and hot surfaces.
8.As assembly may loosen overtime, for best user safety, conduct regular
check of nuts and bolts to insure they are always tight and secure.
9.To clean, wipe with a soft and dry cleaning cloth. If there are stains on
fabric, use a mild detergent to wipe clean and let it air dry.
officesourcefurniture.com
Last Updated: 1/2023

OFFICESOURCE.COM
MODEL NO. 602MMFBK/603MMFGT
ASSEMBLY INSTRUCTIONS
Assembly Instructions
User manual
Seat height adjustment
Pull the lever upward to
adjust the seat height up
and down.
Tilt angle adjustable Backrest
Push the lever to lock the tilt
angle of backrest,
Pull the lever to unlock the
backrest and allow the chair to
recline.
Seat depth adjustment
Pull the lever upward to adjust
the seat depth.
Tension tilt
adjustable
Rotating
the knob to
adjust the tilting
tension according to
different weight
requires.
Height adjustable
Lumbar support
1/4”*1-1/4” with
washer x6
Seat x1 Backrest x1 Armrest x1
Gas lift x1 Nylon Base x1 Caster x5
ACD
EFG
①②③④⑤
⑥
M8*20 x4 M8*25 x3 Spring washer x3 Flat washer x3
Allen Key x1
Step 1 Step 2
②
A
D
①
C
Step 3 Step 4
B
③④
⑤
E
F
G
Mechanism x1
Last Updated: 1/2023