OfficeSource OSXD2001CW User manual

Customer Service
Tel: [phone] (Mon-Fri | 9am-5pm EST.)
Distributed exclusively by COE Distributing!
This assembly manual contains important safety information. Please read and keep for future reference.
Useful Hints Before You Start
Necessary Tools
Model No.:
Description:
1. Read each step carefully before starting.
2. Before beginning assembly, identify, sort and count the parts before assembly.
3. Using the wrong screw will cause damage.
4. Using incompatible hardware might cause damage to product.
5. It is important that each step is performed in correct order to avoid diculties.
6. Assemble your furniture on packaging cardboard to prevent scratch or damage.
7. Do not tighten any screws or bolt until the unit is completely assembled.
8. Keep all hardware parts out of reach of children.
Phillips
Screwdriver
Flat Head
Screwdriver
Hammer CAUTION – Risk of product damage!
Power Drill can be used on lowest
torque setting.
OSXD2001CW
OSXD2001WR
72"W X 72"D
L-Desk
1 3 5 7 9 11

Distributed exclusively by COE Distributing!
Please read completely through the instructions and verify that all listed parts
and hardware are presentbefore beginning assembly.
Hardware List
Cam Bolt
(17x) Cam Lock (17x)
Wooden Dowel
(19x)
Glue (1x)
Adjustment Feet
(6x)
Sticker (1x)
H I J
Sticker (2x)
K
Screw 18mm (8x)Support Tube (2x) Bolt 73mm (2x) Allen Wrench (1x)

Distributed exclusively by COE Distributing!
Please read completely through the instructions and verify that all listed parts
and hardware are presentbefore beginning assembly.
Parts List
②
③
Side Panel (1x) Support Panel (1x) Top Panel (1x)
1234
567
Top Panel (1x)
Left Side Panel (1x)
Right Side Panel (1x)
①
⑤
⑥
④
Back Panel (1x)
⑦
Ⓕ
Ⓕ

Distributed exclusively by COE Distributing!
1
2
①
②
Ⓑ
x 7
Ⓒ
x 2
Ⓔ
x 2
Ⓒ
Ⓔ
Ⓕ x 2
Ⓖ
x 8
Apply glue on all wooden dowels
to ensure integrity of the structure.
Ⓑ
③
Ⓒ
x 4
Ⓒ
ⒻⒼ

Distributed exclusively by COE Distributing!
3
4
14
32 Ⓓ
Attach Round Sticker to all
Cam Lock.
Turn the Cam Lock to lock using
the Screwdriver.
Insert the cam with the arrow
pointing towards the hole in the edge.
Insert the Cam Bolt into the
hole in the edge.
Ⓓ
x 4
Ⓙ
x 4
Ⓐ
Ⓓ
x 2
Ⓙ
x 2
①
②
Ⓓ
③
Ⓓ
Ⓐ
Ⓓ

Distributed exclusively by COE Distributing!
5
6
Ⓔ
Ⓒ
Ⓑ
④
⑤
Ⓔ
Ⓒ
Ⓑ
Ⓑ
x 3
Ⓒ
x 2
Ⓔ
x 2
Ⓑ
x 3
Ⓒ
x 2
Ⓔ
x 2

Distributed exclusively by COE Distributing!
7
8
⑥
Ⓑ
Ⓑ
x 6
④
⑤
⑥
Ⓐ
Ⓓ
x 4
Ⓚ
x 4
Ⓓ
Ⓓ

Distributed exclusively by COE Distributing!
9Ⓒ
x 7
⑦
⑦
Ⓒ
Ⓒ

Distributed exclusively by COE Distributing!
10 Ⓓ
x 7
Ⓚ
x 7
⑦
⑦
Ⓓ
Ⓓ
Ⓐ
Ⓓ
Ⓐ
Ⓓ

Distributed exclusively by COE Distributing!
11
Ⓘ x 1
Ⓗ
x 2
Ⓗ
Ⓘ
Ⓗ
Ⓘ
⑦
③
③
⑦

Distributed exclusively by COE Distributing!
Maximum Recommended Weight Loads
Care & Maintenance
▪Check bolts/screws periodically and tighten them if necessary.
▪Use a soft, clean cloth that will not scratch the surface when dusting.
▪Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
▪Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.
▪Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture nish.
▪It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and spliting of wood. It is advised to keep furniture away
from direct sunlight as sun may damage the nish.
150 lbs