OfficeSource EVT900BK User manual

MODEL NO. EVT900BK
OFFICESOURCE.COM Last Updated: 11/2022
ASSEMBLY INSTRUCTIONS
Conference Table Power Module
EVT900BK
P.1
IMPORTANT NOTE:
Place all wooden parts on aclean and smooth surface such as a rug or carpet to avoid the parts from being scratched
Check that you have all parts and hardware.
Remove all wrapping materials, including staples & packing strapsbefore you start assemble.
Do not tighten all screws or bolts untill all completely assembled.
Keep all hardware parts out of reach of children.
2
1
Power Unit
1 PCS
Screw
M4*14mm
12 PCS
EVST6BGG、EVST8BGG or EVST10AHALFGG
EVST6BGG EVST8BGG EVST10AHALFGG

OFFICESOURCE.COM Last Updated: 11/2022
P.2
Remove the cover, then use Screw to install the power unit (EVT900BK) tothe
cutout if you chose the Power Unit; (The power unit is optional part, if you did
not choose the power unit, please ignore this step
）
1
EVT900BK cover
Connect
Connect
Connect the
power
Remark: the connection way
for the powerunits.
Conference Table Power Module
EVT900BK
EVT900BK cover
MODEL NO. EVT900BK
ASSEMBLY INSTRUCTIONS