OfficeSource PL169DELTT User manual

OFFICE FURNITURE
MODEL NO. PL169DELTT
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Desk Top
Klix Cam
15 Pcs
Cam Lock
15 Pcs
1 2
Side Panel
Housing
Cap (Long)
3 Pcs
A B
3 4
Housing
Cap (Short)
12 Pcs
C
5
3" L-Bracket
With 6 Holes
3 Pcs
Back Panel
6 7 8
M4 x 65
Allen-Key
1 Pc
Screw
#6 x 58 "
18 Pcs
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
9
Ø8mm
Hole Plug
7 Pcs
E
Side Panel S-L Side Panel S-R Center Panel-2PCS
D F G
Bottom Panel
MODEL: 169DELTT
1 OF 3
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
HARDWARE
COMPONENTS
KLIX CAM INSTRUCTIONS
LEFT RIGHT
JCBCW M7X40
2 Pcs
10
ØD-Nut
Hole Plug
3 Pcs
11
5mm Rubber
spacer
3 Pcs
H
PL169 NTT
(Sold Seperately)
+
A
C
F
H
A
C
F
H
Screw M3.5X12
3 Pcs
12
ASSEMBLY INSTRUCTIONS
MODEL: PL169DELTT
1 of 3
®

OFFICE FURNITURE
MODEL NO. PL169DELTT
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Attach Side Panel Small(E)&(F) to Bottom
Panel(D) by using Cam Lock(1) and Klix Cam(2).
2 OF 3
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION: RIGHT
1
3
4
&
3
Attach Housing Caps to
all Klix Cams by pushing
neck of cap through
center of cam.
5
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
5
D
G
E
F
BC
Attach Side Panel(B) to Back Panel(C) by
using Cam Lock(1) and Klix Cam(2).
Attach Center Panel
(G) to Bottom
Panel(D) by using
JCBCW(5).
2
Attach Side Panel(B) to Back Panel(C) by
using Cam Lock(1) and Klix Cam(2).
4
Attach assembled Componens to Top Panel(A) by using Cam
Lock(1) and Klix Cam(2).
C
A
B
BC
D
AAttach Rubber Spacer(11) to
Back Panel(C) by using Cam
Screw(13).
Attach Assembled body to
PL169NTT(H) slowly. Secure Bottom
Panel(D) to PL169NTT(H) back
Panel with L-Bracket(6).Tighten
Screw(7) securely.
6
A
H
F
D7
6
11
12
8
10
9
Attach Hole Plug(9)&(10)
to Side Edge of Side
Panel(B) & Back Panel(C).
MODEL: 169DELTT
ASSEMBLY INSTRUCTIONS
MODEL: PL169DELTT
2 of 3
®

OFFICE FURNITURE
MODEL NO. PL169DELTT
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Attach Side Panel Small(E)&(F) to Bottom
Panel(D) by using Cam Lock(1) and Klix Cam(2).
3 OF 3
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION: LEFT
1
3
4
&
3
Attach Housing Caps to
all Klix Cams by pushing
neck of cap through
center of cam.
5
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
5
D
G
E
F
B
C
Attach Side Panel(B) to Back Panel(C) by
using Cam Lock(1) and Klix Cam(2).
Attach Center Panel
(G) to Bottom
Panel(D) by using
JCBCW(5).
2
Attach Side Panel(B) to Back Panel(C) by
using Cam Lock(1) and Klix Cam(2).
4
Attach assembled Componens to Top Panel(A) by using Cam
Lock(1) and Klix Cam(2).
C
A
B
B
C
D
A
Attach Rubber Spacer(11) to
Back Panel(C) by using Cam
Screw(13).
Attach Assembled body to
PL169NTT(H) slowly. Secure Bottom
Panel(D) to PL169NTT(H) back
Panel with L-Bracket(6).Tighten
Screw(7) securely.
6
A
H
F
D
7
6
11
12
8
10
9
Attach Hole Plug(9)&(10)
to Side Edge of Side
Panel(B) & Back Panel(C).
MODEL: 169DELTT
ASSEMBLY INSTRUCTIONS
MODEL: PL169DELTT
3 of 3
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
®