Oki proColor Pro510DW User manual

2
Table of Contents
1.) Overview 3
2.) Setting the IP Address at the Feeder 4
3.) Setting the IP Address at the Printer 7
4.) Setup of the Printer Port 9
5.) Setup of the Printer, Feeder and Feeder Port on the Printer Media Manager_____14
6.) Connect the Workflow with the Printer ______16
7.) Setup of the Media in the Media Manager 21
8.) Loading the Media 29
9.) Job Submission 32
10.) Input Job and Media Setup 36
11.) Creating a Label Job 39

3
1. Overview
Setup network
for Printer and
Feeder
Setup the
Printer Port
Setup Printer,
Feeder and
Feeder Port
Connect the
Workflow
Setting up
media in the
Media
Manager
Sending the
Media
Parameters for
the Feeder
Calibration of
the media
Load Paper
Login to Express
Login Services &
Job Submission
Input Job &
Media Setup in
LabelPrint
Create your
output and
print
RIP your
output and
send to the
printer
Pg. 4-8
Pg. 9-13
Pg. 14-15
Pg. 16-20
Pg. 21-24
Pg. 25
Pg. 26-28
Pg. 29-31
Pg. 32-35
Pg. 36-38
Pg. 39-42
Pg. 42
Setup the Network and Connection between the Software (one time process)

4
2. Setting the IP Address at the Feeder
STEP 2-1
STEP 2-2
Select Menu.
From this screen, press Select twice more to get to
Page 3.
STEP 2-3
STEP 2-4
Scroll down to Network Settings and press Select.
Select IP Address.

5
STEP 2-5
STEP 2-6
Press Select. The first three zero’s will be highlighted.
Press Up and Down to get to the appropriate number.
Press Save. Press Select, then the next set is now
ready to be entered and you can use the Up and Down
arrows to continue this process until your done. Select
Save and then Exit.
You will be taken back to the Network Settings page.
Select Exit.
STEP 2-7
STEP 2-8
You will be taken back to Page 3. Scroll down and
select Network Configure.
From Network Configure, scroll down to Apply
Settings and Select.

6
STEP 2-9
From the Apply Settings screen, press Select then Up. The
screen will now say Yes.Save then Exit to Offline. The
Feeder will take a moment to update.

7
3. Setting the IP Address at the Printer
STEP 3-1
STEP 3-2
Enter the printer menu. Scroll down and select Admin
Setup to enter.
Using the up and down arrow keys, enter the password
aaaaaa (six lower case a’s). Select Enter.
STEP 3-3
STEP 3-4
Select the Network Setup menu.
Scroll down to the IP Address and select Enter.

8
STEP 3-5
Using the up and down arrow keys to enter the IP
Address, hitting enter to move right to the next column.
When a * (asterisk) symbol appears, the IP Address has
been saved. Select Online to finish.

9
4. Setup of the Printer Port
STEP 4-1
From the Start menu, select Devices and Printers.
STEP 4-2
Select Add a Printer.

10
STEP 4-3
Select Add a Local Printer.
STEP 4-4
Click Create a New Port. From the drop down menu, select Standard TCP/IP Port and click Next.