Oki proColor Pro510DW User manual

2
Before You Start:
Before starting the software installation, you need to ensure that you have a clean version of
Windows 7 with nothing installed. In order to do so, you will need to make sure of the
following:
□There are no applications installed or currently running
□There are no antivirus programs installed
□No software programs are blocking the Port 80 such as GoToMeeting, WebEx,
TeamViewer, etc.
□The computer you’re planning to install the software on has the printer and feeder on
the same network.
Once you are ready to install the software, place the Installation CD into the disk drive.
*DO NOT INSTALL THE DONGLES UNTIL STEP 25*

3
STEP 1
From the Start menu, select Control Panel.
STEP 2
From the right hand side of the screen, select View By Small Icons. Select User Accounts.

4
STEP 3
Select Change User Account Control Settings.
STEP 4
Ensure the account settings are set to Never Notify and click OK. There may be a pop up asking “Do you want
to allow the following program to make changes to the computer.” Select Yes.

5
STEP 5
Insert the software CD into the CD Drive. An Autoplay screen will pop up. Select Open Folder to View Files.
STEP 6
Right-click on the IIS_INSTALLER. Select Run as Administrator.

6
STEP 7
The C:\\ prompt screen will pop up. Enter the letter Yto continue.
STEP 8
Another C:\\ prompt screen will pop up. Enter Y to continue.

7
STEP 9
Another C:\\ prompt screen will pop up. Enter Y to continue and see the test browser.
STEP 10
The test screen will be displayed. If a pop up is displayed, enable the intranet settings by right-clicking over the
bar and selecting Enable Intranet Setting, Go back to the C:// screen.

8
STEP 11
Enter the letter Yif the browser was shown as in the previous step.
STEP 12
Enter the letter Y to open the DVD setup and exit.

9
STEP 13
Click Express Label Print. The InstallAnywhere screen will pop up and prepare for the install.
STEP 14
Click Next to start the installation of Express LabelPrint.

10
STEP 15
After reading the License Agreement, accept the terms and click Next.
STEP 16
Click Next.

11
STEP 17
Review the information and click Next.
STEP 18
Enter the static IP Address for the printer and feeder from your network OR enter the IP Address displayed
above to continue the installation. The Feeder Port Address will always remain as 10001. Click Install.

12
STEP 19
After reading the License Agreement, select Typical Setup and click Accept.
STEP 20
The installation process for the Java Runtime Environment 6 is now complete. Select Finish.

13
STEP 21
The Express LoginServer User Manager will pop up. Click Add.
STEP 22
Enter the applicable information, create a User Name and Password and ensure the Administrator box is
selected. Click OK.

14
STEP 23
Click Save.
STEP 24
Click OK twice.

15
STEP 25
Connect the dongles provided and enter the ColorPro, Class 2, Plugin and Express Rip passwords that were
provided on the cover of the Installation CD. Click Next.
STEP 26
Click Next.

16
STEP 27
Select I Accept the Terms in the License Agreement and click Next.
STEP 28
Select Complete and click Next.

17
STEP 29
Click Install.
STEP 30
Click Finish.

18
STEP 31
Click Accept.
STEP 32
Click Next.

19
STEP 33
Click Next.
STEP 34
Click Next.

20
STEP 35
Click Close.
STEP 36
Click Done.