Table of Contents Page
....3.3.7 Face Up Stacker Assy 33
....3.3.8 Eject Roller Assy 34
....3.3.9 Motor Assy 35
....3.3.10 Hopping Roller Shaft Assy 36
....3.3.11 Stacker Cover Assy 37
....3.3.12 Registration Roller 38
....3.3.13 Roller Transfer Assy 39
....3.3.14 Fusing Unit 40
....3.3.15 Back-up Roller 41
....3.3.16 Sensor Plate (Inlet) 42
....3.3.17 Sensor Plate (Outlet), Sensor Wire Assy 43
....3.3.18 Manual Feed Guide Assy 44
....3.3.19 Sensor Plate (Paper Supply) 45
....3.3.20 Main Control M7E-PCB 46
....3.3.21 Power Supply/Sensor Board, High Voltage Unit and
Contact Assy 47
....3.3.22 Cassette Guide L Assy 49
....3.3.23 Cassette Guide R Assy 50
....3.3.24 Spacer Bearing (L/R) 51
4 Adjustments
4. Adjustment 52
....4.1 Maintenance Modes and Functions 53
........4.1.1 User Maintenance Mode 54
........4.1.2 System Maintenance Mode 55
........4.1.3 Engine Maintenance Mode 56
........4.1.4 EEPROM Initialization 57
....4.2 Adjustment When Replacing a Part 58
........4.2.1 Uploading/Downloading EEPROM data 60
5 Maintenance
5.1 Periodical Replacement Parts 61
5.2 Cleaning 62
....5.2.1 Cleaning of LED Lens Array 63
....5.2.2 Cleaning Page Function 64
6 Troubleshooting
6.1 Troubleshooting Tips 65
6.2 Points to Check before Correcting Image Problems 66
