Okina USA SHDX-755AIDN-B Quick start guide

SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev031209
Operational Manual
AVAI 3-AXIS Dome Color Camera
SHDX-755AIDN-B / SHDX-755AIDN-W
SHDX-755AIDN-BP / SHDX-755AIDN-WP
z1/3” Sony Super HAD CCD II
z550 TV Lines, HQ-1 DSP
zHigh Gain/Low Noise Amplifier - DNR
z2.9mm~10.0mm Aspherical Auto Iris Lens
Made in Japan
z0.15 Lux @ F1.2 (Color mode automatically
switches to B/W mode under 2.0 Lux)
zDay & Night with Adjustable Color/D&N Switch
z12V DC
SHDX-755AIDN-B
SHDX-755AIDN-W
SSDX-742AI-B
SSDX-742AI-W
SHDX-755AIDN-BP
SHDX-755AIDN-WP
SSDX-742AI-BP
SSDX-742AI-WP
FEATURES
DIMENSIONS
(
Unit: mm
)
Please read the Operational Manual
before attempting to use this product.
SSDX-742AI-B / SSDX-742AI-W
SSDX-742AI-BP / SSDX-742AI-WP
z1/3” Sony Super HAD CCD
z420 TV Lines
z2.9mm~10.0mm Aspherical Auto Iris Lens
Made in Japan
z0.15 Lux @ F1.2
z12V DC
3-AXIS
*Day & Night Feature Available Only for SHDX Models
A
VAI = Aspherical Vari-Focal Auto Iris
P = PAL Version

SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev031209
1. FAR / NEAR
2. WIDE / TELE
3. DC LEVEL
The VR for adjusting the IRIS level of Auto Iris Lens.
4. CONTROL SWITCHES
Switch 1. D&N: Day & Night Mode (Color / D&N Switch) (SHDX Models)
Switch 1. AES: Automatic Electronic Shutter (AES / OFF Switch) (SSDX Models)
Switch 2. BLC: Back Light Compensation (BLC / OFF Switch)
Switch 3. AGC: Automatic Gain Control (AGC / OFF Switch)
Switch 4. Flickerless (FL / NOM Switch)
5. VIDEO CONNECTOR
This is an output for connection to a video monitor, etc (75 ohms).
6. POWER INPUT TERMINAL
Connect the power supply of 12V DC.
(1). Color / D&N (SHDX Models)
Color: Color mode. (Normal position)
D&N: Day and Night Switch. Color mode automatically switches to B&W mode under 2.0 Lux.
(1). AES/OFF (SSDX Models)
AES:AutomaticElectronicShutter.The range of shutter speed from 1/60sec (1/50sec) to 1/100,000sec. This mode is
employed for using a manual iris lens.
OFF:AESOFF.The shutter speed is 1/60sec (1/50sec).
When an auto iris lens is applied, AES should be off.
(2). BLC/OFF
BLC:BackLightCompensation.When the object is dark by strong light (sunlight etc….) as (Fig.2-1), please turn on BLC to
make object become bright as (Fig.2-2).
OFF: BLC OFF. (SHDX Models) OFF: BLC OFF. (SSDX Models)
(3). AGC/OFF
AGC:AutomaticGainControl.The level of gain varies from 0 to 26dB.
OFF:AGCOFF.The level of gain is fixed at 0dB.
(4). FL/NOM
FL:Flickerless.In FL mode, the shutter speed is 1/100sec. (NTSC system) / 1/120sec. (PAL).
If choose FL mode, [AES] switch should be off. (SSDX Model)
NOM: Normal position.
PARTS AND FUNCTIONS
CONTROL SWITCH OPERATION

SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev031209
Model SHDX-755AIDN-B(W) SHDX-755AIDN-BP(WP) SSDX-742AI-B(W) SSDX-742AI-BP(WP)
TV System NTSC PAL NTSC PAL
Image Sensor 1/3” Sony Super HAD CCD II 1/3” Sony Super HAD CCD
DSP Sony HQ-1 Sony
Total Pixels 811(H) x 508(V) 795(H) x 596(V) 537(H) x 505(V) 537(H) x 597(V)
Video Output 1.0 Vp-p Composite, 75 ohms (BNC Connector)
Resolution 550 TV Lines 420 TV Lines
Minimum
Illumination
0.15 Lux @ F1.2
Color mode automatically switches to
B/W mode under 2.0 Lux 0.15 Lux @ F1.2
S/N Ratio More than 50dB
(AGC OFF) More than 48dB (AGC OFF)
Synchronization Internal
Back Light
Compensation ON/OFF Switchable
Auto Gain Control ON/OFF Switchable
Auto Electronic
Shutter Auto ON/OFF Switchable
Day & Night Color / D&N Switchable N/A
Flickerless ON/OFF Switchable
White Balance AWB 2500°K ~ 9200°K
DNR / Sens-up High Gain/Low Noise Amplifier; Automatic N/A
Lens 2.9mm~10.0mm Aspherical Auto Iris Lens
Made in Japan
Power Supply 12V DC
Power
Consumption 2.0W (166mA) 1.8W (150mA)
Operation
Temperature 14°F ~ 122°F / -10°C ~ +50°C
Storage Humidity Maximum: 85%RH
Dimension 4.90”(Ø) x 3.78”(H) / 124.4mm(Ø) x 96mm(H)
Weight 0.77lbs / 350g
*Specifications are subject to change without notice
zOne (1) SHDX-755AIDN-B/SHDX-755AIDN-BP, SHDX-755AIDN-W/SHDX-755AIDN-WP, SSDX-742AI-B/SSDX-742AI-BP, or
SSDX-742AI-W/SSDX-742AI-WP Camera with video/power cable
zTwo (2) Screws
zOne (1) Operational Manual
*For any returns, please include all components listed above with original packaging in Resalable Condition.
Absolutely No Returns will be accepted if any component is missing/damaged or if any cable is cut or tampered with.
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.
CAUTIONS
PACKAGE CONTENTS
SPECIFICATIONS

SHDX-755AIDN-B(W)_SSDX-742AI-B(W)_rev031209
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for operation of this camera is between 14°F ~ 122°F /
-10°C ~ 50°C and the allowable humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick-up device surface be cleaned before lens installation or whenever the lens is changed. Cleaning
should be done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove
any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be
connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in
a fire or electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.
OKINA USA Products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided
if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was
purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it
should not be removed.
2.
Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided
immediately. It is the customer’s responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of
the warranty.
WARRANTY