Olympus PT-058 User manual

PT-058
2
30
58
86
114
170
142
JP
EN
FR
DE
使用說明書
ES
CHT
KR

EN 30
EN
Thank you for purchasing our product.
Please read this instruction manual carefully and use the product
safely and correctly. Please keep this instruction manual for
reference after reading it.
Wrong use may cause damage to the camera inside the Case due
to water leakage, and repair may not be possible.
Before use, perform an advance check as described in this manual.
Introduction
Unauthorized copying of this manual in part or in full, except for private
use, is prohibited. Unauthorized reproduction is strictly prohibited.
OLYMPUS CORPORATION shall not be responsible in any way for lost
profits or any claims by third parties in case of any damage occurring
from improper use of this product.
Please read the following items before use
This Case is a precision device designed for use at a water depth within
45 m. Please handle it with sufficient care.
Please use the Case correctly after sufficient understanding of the
contents of this manual in regard to handling of the Case, checks before
use, maintenance, and storage after use.
OLYMPUS CORPORATION shall in no way be responsible for
accidents involving immersion of a digital camera in water. In addition,
expenses incurred for damage of internal materials or loss of recorded
contents due to water entering the camera will not be compensated.
Please address these possible damages by insuring your camera at
your own discretion before use.
OLYMPUS CORPORATION shall not pay any compensation for
accidents (injuries or material damage) at the time of use.

EN 31
EN
For safe use
This instruction manual uses various pictographs for correct use of the
product and to prevent danger to the user and other persons as well as
property damage. These pictographs and their meanings are shown
below.
WARNING This shows the content regarding assumption of
possibility of human death or severe injury in case
of handling with disregard of this indication.
CAUTION This shows the contents regarding assumption of
possibility of injury or damage to property in case of
handling with disregard of this indication.
WARNING
1Keep this product out of the reach of babies, infants, and children.
There is the possibility of occurrence of the following types of
accidents.
• Injury by dropping onto the body from a height.
• Injury from parts of the body getting caught in parts which open and
close.
• Swallowing of small parts, O-ring, silicone grease and silica gel. Please
consult a physician immediately if any parts have been swallowed.
• Triggering of the flash in front of the eyes may cause permanent vision
impairment etc.
2Do not store with a battery in the digital camera housed in this
product. Storage with a battery inserted may lead to leakage of the
battery liquid and fire.
3If leakage of water should occur with a camera installed in this
product, quickly remove the battery from the camera. There is the
possibility of ignition and explosion from generation of hydrogen gas.
4This product is made of resin. There is the possibility that injuries
may be caused when it becomes broken because of strong impact
with a rock or other hard objects. Please handle it with sufficient
care.

EN 32
EN
CAUTION
1Do not disassemble or modify this product. This may cause water
leakage or defect. In case of the loss of image data caused by
disassembly, repair or modification etc. by any party other than
those appointed by OLYMPUS CORPORATION, we shall bear no
responsibility for damage.
2Use or storage of the product at the following locations may cause
defective operation, trouble, damage, fire, internal clouding, or water
leakage. This should be avoided.
• Locations reaching high temperatures such as those under direct
sunlight, in an automobile, etc.
• Locations close to fire
• Water depths in excess of 45 m
• Locations subject to vibrations
• Locations with high temperature and humidity or with severe
temperature changes
• Locations with volatile substances
3Opening and closing at locations with much sand, dust, or dirt may
impair the waterproof characteristic and cause water leakage. This
should be avoided.
4This product is not a case to soften impacts to the camera inside the
product. When this product with a digital camera inside it is subjected
to impacts or heavy objects are placed onto it, the digital camera
may become damaged. Please handle it with sufficient care.
5Do not use the following chemicals for cleaning, corrosion
prevention, prevention of fogging, repair or other purposes. When
these are used for the Case directly or indirectly (with the chemicals
in vaporized state), they may cause cracking under high pressure or
other problems.

EN 33
EN
Chemicals which cannot
be used Explanation
Volatile organic solvents,
chemical detergents Do not clean the Case with alcohol, gasoline, thinner or other volatile organic solvents or with
chemical detergents etc. Use pure water or
lukewarm water.
Anticorrosion agent Do not use anticorrosion agents. The metal parts
use stainless steel or brass. Wash with pure
water.
Commercial defogging
agents Do not use commercial defogging agents.Always use the specified desiccant silica gel.
Grease other than
specified silicone grease Use only the specified silicone grease for the silicone O-ring, as otherwise the O-ring surface
may deteriorate and water leakage may occur.
Adhesive Donot use adhesive for repairs or other purposes.
Whenrepairisrequired,please contactadealer or
a service station of OLYMPUS CORPORATION.
6Jumping into the water with the Case in your pocket or in your hand,
throwing the Case from a boat or ship into the water, and other rough
handling may cause water leakage. Please handle with sufficient
care, when handing it over from hand to hand etc.
7If the Case interior or the camera should become wet because of
water leakage, etc., immediately wipe off all moisture and contact
your local service station or dealer.
8Please remove the O-ring when traveling by air. Otherwise air
pressure may make it impossible to open the Case.
9For safe use of the digital camera in this product, please read the
“Instruction Manual” for the digital camera carefully.
0When sealing this product, take sufficient care that no foreign matter
gets caught at the O-ring and the contact surface. It is caused for
water leakage.
aWhen you install your digital camera in the Case after taking pictures
in the water, it may cause the loss of transparency of the lens inside
even if you insert the supplied silica gel to the Case when drying the
camera is insufficient.

EN 34
EN
Contents
Introduction............................................................................30
Please read the following items before use...........................30
For safe use...........................................................................31
1. Preparations..................................................................36
Check the contents of the package.......................................36
Names of the parts.................................................................37
Using the accesories.............................................................39
Install the hand strap..............................................................39
Installation and removal of the monitor hood..........................40
Mounting and removing the lens cap......................................40
Prepare the digital camera ....................................................41
Attach the antireflective ring to the digital camera.................41
2. Advance check of the Case.........................................42
Advance check before use....................................................42
Remove the O-ring................................................................42
Remove any sand, dirt, etc....................................................43
How to Apply Grease to the O-ring........................................43
Install the O-ring....................................................................44
3. Install the digital camera..............................................45
Open the Case ......................................................................45
Load the digital camera.........................................................46
Make sure the camera is loaded properly .............................47
Seal the Case........................................................................48
Check the operation of the loaded camera............................48
Waterproofness test...............................................................49
4. Connecting the underwater flash .................................50
5. Taking Pictures Under Water.......................................52
Underwater shooting modes..................................................52
How to select the shooting scene..........................................53
Locking AF during underwater shooting................................53

EN 35
EN
6. Handling After Shooting ..............................................54
Wash the Case with pure water.............................................54
Wipe off any waterdrop..........................................................54
Take out the digital camera....................................................55
Dry the Case..........................................................................55
7. Maintaining the Waterproof Function ...................................... 56
Remove the O-ring................................................................56
Remove any sand, dirt, etc....................................................56
How to Apply Grease to the O-ring........................................56
Install the O-ring....................................................................56
Replace consumable parts....................................................56
8. Appendix .......................................................................57
Specifications ........................................................................57

EN 36
EN
1. Preparations
Check the contents of the package
Check that all accessories are in the box.
Contact your dealer if accessories are missing or damaged.
• Optical fiber
cable adapter
(PFCA-03) • Silicone grease
(PSOLG-2) • Silica gel 1g (5)
(SILCA-5S)
• Monitor hood
(PFUD-08)
(on the body)
• Monitor hood
strap
• Lens cap
(PRLC-14)
• Hand strap
• O-ring remover • Antireflective ring
(POSR-053) • Instruction manual (this manual)
• Case body
(Check that the O-ring (POL-058) is installed)
After purchase, be sure to do maintenance even in brand-new condition. Neglecting the
maintenance may become the cause of water leakage.
For how to maintenance the case, refer to P.56.
• Optical fiber
cable insertion
slot cap (2)

EN 37
EN
Names of the parts
*
*
*
1Palm grip
2Zoom lever
3Shutter button
4ON/OFF button
5Accessory mount
*6LOG lever
7Diffuser
8Slide lock
9Open/close dial
0Lock knob
aLens ring
bMonitor inner hood
cRear lid
dO-ring
eTripod seat

EN 38
EN
*
*
*
*
*
fINFO button
gControl dial
hR(Movie) button/
Select button
iMode dial
jq(Play) button
*
*
*
*
kFbutton/Arrow pad C
l#button/Arrow pad D
mOK/AFL button (*1)
njYbutton/Sbutton/
Arrow pad E
*
*oMENU button
pMode function call
button/Arrow pad F
qMonitor window
rMonitor hood
(*1) During Underwater Snap, Underwater Wide-Angle, Underwater-Macro or Underwater
HDR shooting mode, the OK/AFL button functions as theAF LOCK button (P.53).
Memo:
The Case operation parts marked by * correspond to the operation parts of
the digital camera. When the operation parts of the Case are operated, the
corresponding functions of the digital camera will operate. For details of the
functions, refer to the instruction manual for the digital camera.

EN 39
EN
Using the accesories
Install the hand strap
Install the hand strap on the Case body.
Hand strap ring
Hand strap
Installation illustration Installation completed
You can also attach the strap on the upper hand strap ring of the Case.
How to use the hand strap
Pass your hand through the hand strap and adjust the length with the
stop button.
Stop button

EN 40
EN
Installation and removal of the monitor hood
Installation
Fit the monitor hood as shown in the figure into the guides above and
below the monitor window one after the other.
Removal
Remove the monitor hood from the guides above and below the monitor
window one after the other by widening the monitor hood.
Installation Removal
Guides
Mounting and removing the lens cap
Fit the lens cap onto the lens ring
as shown in the figure. Be sure
to remove the lens cap before
shooting.

EN 41
EN
Prepare the digital camera
Prepare the digital camera before loading it in the Case.
1. Battery Confirmation
It is impossible to change the batteries when using the Case. Make sure
that you have sufficient remaining battery capacity before use.
2. Confirmation of the Remaining Number of Pictures to be Taken
Confirm that the image storage has a sufficient remaining number of
pictures to be taken.
3. Remove the hand strap from the digital camera.
When a digital camera is loaded without removing the hand strap, the
hand strap may get caught between the Case lids and may cause water
leakage.
Attach the antireflective ring to the digital camera
Remove the lens ring while pressing the lens ring release button from the
digital camera, then attach the antireflective ring.
Change the digital camera setting when using the underwater wide
conversion lens (PTWC-01).
Press the OK button to display the live control, then select “PTWC-01”
under “Accessory Settings” with arrow pads or control dial. Then press
the OK button.
* Even if the setting has been changed, the four corners of the image may
be darkened when the zoom is used.
For details, see the instruction manual of the digital camera.
Lens ring release button

EN 42
EN
2. Advance check of the Case
Advance check before use
Depending on the carrying and storage conditions, the maintenance
status, etc., the waterproof function may be damaged.
Before using, always perform the following advance checks.
If the advance test should show water leakage with normal handling, stop
using the Case and contact your dealer or an Olympus service station.
Remove the O-ring
Open the Case and remove the O-ring.
Procedure
1Insert the O-ring remover into the gap between the O-ring and O-ring
groove wall.
2Bring the tip of the inserted O-ring remover below the O-ring. (Be
careful not to damage the groove with the tip of the O-ring remover.)
3Lift the O-ring, pinch it with your fingertips and pull it out of the Case.

EN 43
EN
Remove any sand, dirt, etc.
After visually checking that dirt has been removed from the O-ring, check
for attached sand and other foreign matter, as well as for damage and
cracks by squeezing the entire circumference of the O-ring lightly with
your fingertips.
Remove attached foreign matter from the O-ring groove with a lint-free
clean cloth or a cotton swab.Also remove any sand or dirt attached to any
part of the Case that comes into contact with the O-ring.
• When a sharp object is used to remove the O-ring or to clean the inside of the O-ring
groove, the Case and the O-ring may be damaged and water leakage may be caused.
• When the O-ring is checked with the fingertips, take care not to stretch the O-ring.
• Never use alcohol, thinner, benzene or similar solvents or chemicals detergents to
clean the O-ring. When such chemicals are used, it is likely that the O-ring will be
damaged or that its deterioration will be accelerated.
How to Apply Grease to the O-ring
1Apply the exclusive lubricant to the
O-ring
Make sure that your fingers and the Oring
are free of dirt, then squeeze the appropriate
amount of exclusive lubricant onto a finger to
spread onto the entire circumference of the
O-ring (approx. 15 mm is adequate).
2Spread the lubricant
all over the O-ring.
Apply the lubricant with 3 fingers and spread
it over the O-ring. Be careful not to use force
as this may stretch the Oring.
3Check that the O-ring is free of scratches
or unevenness.
After spreading the lubricant, check visually
and by touch that the O-ring is not scratched
and that its surface is flat. If it is damaged in
any way, be sure to replace it with a brand-
new O-ring.
• Always perform maintenance of the waterproof function even when the Case has
been opened every shooting. Neglecting this maintenance may cause water leakage.
• When the Case is not to be used for a long time, remove the O-ring from the groove to
prevent deformation of the O-ring, apply a thin coat of silicone grease, and store it in a
clean plastic bag or the like.

EN 44
EN
Examples of foreign matter sticking to the O-ring
Hair Fibers Grains of sand
Install the O-ring
Confirm that no foreign matter is in the groove and then fit the O-ring. At
this time, confirm that the O-ring does not stick out from the groove.
When sealing this product, make sure that no hairs, fibers, sand particles
or other foreign matter stick not only to the O-ring, but also to the contact
surface (front lid). Even a single hair or a single grain of sand may cause
water leakage. Please check with special care.

EN 45
EN
3. Install the digital camera
Open the Case
1Slide the lock knob towards the arrow direction (1 of figure below).
2Slide and hold the slide lock towards the arrow direction (2 of figure
below) and turn the open/close dial counter clockwise (3 of figure
below).
3Turn the open/close dial to the position where it cannot be turned
further.
4Open the rear lid of the Case gently.
Slide lock
Open/close dial
Lock knob
Open
Do not exert too much force while turning the open/close dial. Doing so may
damage the dial.

EN 46
EN
Load the digital camera
1Confirm that the digital camera is OFF.
2Confirm that the LOG lever of the digital camera is set to the OFF
side.
3Gently and straightly insert the digital camera into the Case.
4Insert 2 piling up silica gel bags (1 g) between the bottom of the
digital camera and the Case.
The silica gel bags are provided for prevention of fogging.
3
4
• If the silica gel bag is caught when the Case is sealed, water leakage will
occur.
• Once silica gel has been used, the moisture absorption performance will
be impaired. Always replace the silica gel when the Case is opened and
closed.
• Clean the surface of the dials of the Case and the camera.
The dials may slip if there is grease or foreign matter on them.

EN 47
EN
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Are silica gel bags inserted all the way?
When the silica gel bags are not inserted correctly, it causes entrapment
when closing the rear lid.
• Is the grease applied to O-ring?
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact surface
on the front lid?

EN 48
EN
Seal the Case
1Set the LOG lever to the OFF side.
2Close the Case gently while aligning the mounting projection of the
rear lid and groove.
3Turn the open/close dial clockwise until you hear a “click” sound to
lock the Case.
• The Case is sealed.
4Slide the lock knob towards the LOCK side.
Close
• If the open/close dial is not fully turned, the Case will not be sealed. This
will cause water leakage.
• Close the rear lid of the Case so that the lens cap and LCD hood straps do
not get caught. If the straps are caught, water leaks may result.
Check the operation of the loaded camera
After sealing the Case, check that the camera operates normally.
• Operate the ON/OFF button on the Case and confirm that the camera turns
ON/OFF.
• Press the shutter button on the Case and confirm that the camera shutter
releases.
• Also operate other control buttons on the Case and confirm that the camera
functions properly.
LOG lever