Olympus m:robe MR-100 User manual

QUICK START GUIDE
• m:robe • Headphones • Cradle
• Dedicated
USB cable • AC adapter • AC cord
• Remote
(not included
:RM13)
• Extension cable
• CD-ROM
• USER’S MANUAL
• QUICK START
GUIDE (this guide)
• Warranty card
HDD Music
Player
MR-100
m:robe
Thank you for purchasing this OLYMPUS HDD Music Player-m:robe MR-100. This
Quick Start Guide contains instructions for setup prior to use of this product.
You can start using this product immediately after reading this guide. For more details
on operations and settings, refer to the supplied “USER’S MANUAL.”
Checking the contents
Set
Cha
A
C
B
C
c
C
P
D
P
Chargin
blinks.
After ch
User registration
To stay informed of important updates and news regarding your Olympus
product, be sure to register your purchase online.
Use the supplied CD-ROM to install the Music/Photo Organization
Software “m:trip“, on your PC. After installing, click [OK]on the
registration screen to register your purchase.
Get
Crad
(supp
(1,1) Process Black -1- U1-NG0626-01.indd 9/21/2004, 2:11:16 PM

dle
cord
ANUAL
ART
is guide)
card
C
B
DA
MENU
POWER
CHARGING
LED
HDD Music
Player
M
R-100
R-100. This
uct.
r more details
Set
Inst
Sof
A
Tu
th
Th
B
Cli
Aft
ins
C
Cli
scr
Ins
If you a
To r
A
Do
th
You
scr
For d
Help
scree
Setting up your m:robe
Charging the battery
A
Connect the AC cord to the AC adapter.
B
Connect the AC adapter to the DC IN 5V jack of the
cradle.
C
Plug in the AC cord to a wall outlet.
D
Place your m:robe in its cradle.
Charging starts. The charging display appears and the LED of the device
blinks.
After charging, the LED and the CHARGING display disappear.
r Olympus
tion
he
Getting Started
AC adapter
(supplied)
To DC IN 5V jack
To a wall
outlet
Cradle
(supplied)
(1,1) Process Black -1- U1-NG0626-01.indd 9/21/2004, 2:11:37 PM

C
Imp
You c
A
Ins
m:t
B
Cli
scr
Im
Tur
A
P
Tran
Setting up your m:trip
Installing the supplied Music/Photo Organization
Software “m:trip“
A
Turn on your PC and insert the supplied CD-ROM into
the CD-ROM drive.
The screen below appears.
B
Click the [m:trip] button.
After the Install Wizard screen appears, follow the on-screen
instructions.
C
Click [Finish] when the InstallShield Wizard Complete
screen appears.
Installation of m:trip is complete.
If you are prompted to reboot your PC after installation, reboot your PC.
To run m:trip
A
Double-click the m:trip icon on the desktop to start
the software.
You will need to register your m:robe in the user registration
screen when using “m:trip“ for the first time.
For details on operations and instructions for “m:trip“, refer to the online
Help. To browse the online Help, click [Help] at the top of the m:trip
screen.
k of the
he device
.
To a wall
outlet
(1,1) Process Black -1- U1-NG0626-01.indd 9/21/2004, 2:11:48 PM

MENU
POWER
Importing music to m:trip
You can import music from audio CDs.
A
Insert an audio CD into your PC.
m:trip runs automatically and the screen below appears.
B
Click the [Import from audio CD] button on your PC
screen.
Importing of the audio CD starts.
Turning on your m:robe
A
Press POWER.
Transferring music to your m:robe
ization
OM into
-screen
omplete
your PC.
o start
stration
o the online
m:trip
(See other side)
(1,1) Process Black -1- U1-NG0626-01.indd 9/21/2004, 2:11:59 PM

A
C
B
B
CONNECT
DO NOT DISCONNECT!
Connecting to your PC
Connect your m:robe to your PC.
A
Connect the dedicated USB cable to your PC.
B
Connect the dedicated USB cable to the cradle, or
connect the cable directly to your m:robe.
C
Place your m:robe in its cradle.
Starting transfer
After you connect your m:robe to your PC, m:trip automatically runs.
Click [Start] in the screen, which is displayed by clicking [Sync.] in the
bottom right of your PC’s screen, to start transferring.
During transfer, the CONNECT display
appears on your m:robe.
When the transfer is complete, the transfer
indicator stops on the screen.
Click the [Remove m:robe] button on the
m:trip screen, and then remove the dedicated
USB cable from the cradle or your m:robe.
Con
Che
A
C
c
B
C
You can
Indicat
The ba
: Ba
/
: Ch
This m
Usi
List
To USB jack
To USB jack
PC
Cradle
(supplied)
To PC connecting jack
(1,1) Process Black -2- U1-NG0626-01.indd 9/21/2004, 2:12:10 PM

C
CONNECT
DISCONNECT!
MAIN MENU
BROWSE
MUSIC SETTINGS
DEVICE SETTINGS
MUSIC LIST
02:3001:15
A
B
MENU
POWER
C.
dle, or
lly runs.
c.] in the
CS
I
w
Connecting the headphones
Checking the battery
Play
BI
“
t
A
Connect the supplied headphones to the extension
cable.
B
Connect the extension cable to your m:robe.
D
U
t
You can check the battery indicator on the display.
Indicator is in the lower left corner of the display.
The battery indicator
: Battery is fully charged
/ : Low battery
: Charge the battery
This m:robe has a touch pad system. Check the keys on the m:robe.
Using the Touch Pad
MENU play/pause
right
Scroll Key
Listening music from your m:robe
AP
M
M
P
Cradle
(supplied)
ting jack
To the remote/headphones jack
To the extension
cable
(1,1) Process Black -2- U1-NG0626-01.indd 9/21/2004, 2:12:20 PM

Printed
BROWSE
ARTISTS
ALBUMS
GENRES
COMPOSERS
ALL
02:3000:00
MAIN MENU
MUSIC LIST
MUSIC SETTINGS
DEVICE SETTINGS
BROWSE
02:3000:00
MAIN MENU
E
E
TTINGS
S
ETTINGS
S
T
02:3001:15
WE
R
MAIN MENU
BROWSE
MUSIC SETTINGS
DEVICE SETTINGS
MUSIC LIST
02:3001:15
ALL
ALL track 2
ALL track 3
ALL track 4
ALL track 5
ALL track 1
02:3000:00
PLAYBACK1/12
Track Title1
Artist Name
02:3200:08
02:30
CSelect “ALL”, and then press .
If a list of music is displayed, the music
was successfully transferred.
Play music
BIn the MAIN MENU, select
“BROWSE” using the Scroll Key,
then press .
For furt
MANU
Tradem
• m:ro
• Wind
• All o
trade
• The s
xtension
.
D
Using the Scroll Key to select
the music, and then press .
Spe
A
I
p
B
S
“
K
C
S
u
T
S
W
C
be.
APress and hold until MAIN
MENU display appears.
Music playback starts, and the
PLAYBACK display appears.
Use
(1,1) Process Black -2- U1-NG0626-01.indd 9/21/2004, 2:12:33 PM

U1-NG0626-01
YC0410
Printed in CHINA
BROWSE
S
ERS
02:3000:00
MAIN MENU
ST
E
TTINGS
S
ETTINGS
02:3000:00
MAIN MENU
E
E
TTINGS
S
ETTINGS
S
T
02:3001:15
ALL
2
3
4
5
02:3000:00
PLAYBACK
a
ck Title1
ist Name
02:32
02:30
DEVICE SETTINGS
LANGUAGE
BEEP
LCD CONTRAST
BACKLIGHT
DATE&TIME
02:3000:00
For further details on operations and functions, refer to the supplied USER‘S
MANUAL.
Trademarks
• m:robe and m:trip are trademarks of OLYMPUS CORPORATION.
• Windows is a registered trademark of Microsoft Corporation.
• All other company and product names are registered trademarks and/or
trademarks of their respective owners.
• The screen fonts used by this product belong to Ricoh corporation.
Specify the DATE&TIME and LANGUAGE
A
In the MAIN MENU, select “DEVICE SETTINGS” and
press .
B
Select “DATE&TIME” or
“LANGUAGE” using the Scroll
Key, and then press .
C
Select the item and value that you want to change
using the Scroll Key, then press .
The value is set, and the display returns to the DEVICE
SETTINGS.
When you need to change other settings, repeat step Band
C.
Useful settings
(1,1) Process Black -2- U1-NG0626-01.indd 9/21/2004, 2:12:46 PM