Omcan Fp-cn-0010 User manual

Revised - 11/16/2021

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Bowl Cutter

Model FP-CN-0010

Item 47191

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

-------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------- 6 - 7

--------------------------------------------------------------------------------------------- 7

------------------------------------------------------------------------------------- 7 - 8

----------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11

------------------------------------------------------------------------------------------- 12 - 14

---------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model FP-CN-0010

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

READ ALL INSTRUCTIONS BEFORE USING

MAIN STRUCTURE

The machine is mainly composed of frame, turbine driving device, blades-unit, dish basin, basin cover, pulley

mechanism, motor and other main components.

5

Safety and Warranty

Material safety

The machine parts which contact with food directly are made of material strictly in accordance with the

requests of food safety and health standards, which does not rust, corrode, is non-toxic and harmless to

human health even after using for a long time.

WORKING PRINCIPLE

When the machine is working, close the basin cover, and put di󰀨erent kinds of roots, stems, leaves, vegetable,

meat and so on into the basin, the food rotates anti-clockwise with the basin, which will be cut into paste when

coming across with vertically rotating blades (size of the paste is to be controlled by adjusting the cutting time).

ELECTRICAL

The machine is equipped with an input cable with cross section 3X1.0 mm2, length 1.85m. The machine

should be connected to power source as 110V / 60Hz.

Attention: socket must be equipped with switch, to make sure power can be cut o󰀨 on time.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o󰀨 to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6

Technical Specications

Model FP-CN-0010

Working Capacity 480.6 lbs. / 218 kgs./h

Electrical 110V / 60Hz / 1

Power 750W

Speed of Motor 1450r/min

Speed of Knife 1450r/min

Speed of Bowl 17r/min

Diameter of Bowl 18.1” / 460mm

Depth of Bowl 3.3” / 85mm

Maximum Food Capacity 10 L / 7 kgs.

Minimum Food Capacity 2.9 L / 2 kgs.

Dimensions 29.9” x 20.3” x 17.8” / 760 x 515 x 452mm

Packaging Dimensions 33.6” x 23.7” x 23.7” / 853 x 603 x 601mm

Weight 110.2 lbs. / 50 kgs.

Packaging Weight 144.4 lbs. / 65.5 kgs.

Item Number 47191

Installation

Make sure there is no damage on the labels outside of carton before unpacking. If there is damage from

transportation (like scars or labels taken o󰀨), please list out all the damaged parts in 3 days after the date on

document, and contact with the supplier. While transporting, please keep the machine parallel with the ground,

please do not tip over the machine.

PACKING MATERIAL DISPOSAL

All packing material (cartons, plastic bags, polyurethane foam) can be disposed as normal city garbage. In

countries with special requirements and standard on waste disposal, please dispose according to local laws.

PLACE THE MACHINE

Place the machine in a dry and ventilated level surface, to ensure the smooth and safe machine operation.

Choose a placement space that allows easy access to all parts of the unit.

CONNECTION

Stretching elongation power cord, with grounding symbol of wire core, reliable grounding, three other line core

(single-phase motor for two) respectively received a matching circuit breaker (the user should bring along their

7

Installation

Operation

Maintenance

own) extension line terminal blocks, reliable and marks on equipotential connection wires.

PREOPERATIONAL CHECK

Before the rst operation, need to proceed with these steps:

1. Carefully unwrapped the package and read the “instruction manual”.

2. Inspect each part, whether the fasteners have loosened in transit, switch and the power cord is damaged,

and check the power supply voltage that it is compatible with them main switch.

3. Check whether there are foreign objects inside the dish basin, if there is any foreign object, remove and

clean immediately, so as to avoid external hard impurities causing damage of cutting tools and other

machine parts.

Note: Only when the motor is not in operation can the food be loaded.

1. Plug in the power supply.

2. Open the cover, put in the right amount of ingredients, pay attention to not overll. Large pieces of

vegetables should be cut into small pieces. Be sure to only use food ingredients, using anything other than

food ingredients will damage the cutting tool.

3. Close the cover.

4. Press the “ON” button, the machine will start.

Note: The machine should operate smoothly without any abnormal sound. If an abnormal sound is

heard, immediately turn o󰀨 the unit and unplug.

5. Depending on the ingredients being processed, the chopping time may need to be altered.

6. Before each operation, ensure that only food ingredients are in the basin, this is to prevent damage to the

blades or other parts.

7. After nishing operation, press the “OFF” button, the dish basin and cutting blade will stop running.

8. Using a spatula, remove the processed ingredients from the basin.

9. Remove the power supply when not in use and before cleaning.

10. Cleaning must be done after each operation.

REGULAR CLEANING

Note: Don’t put hands into the machine while in operation.

Only proceed with cleaning and maintenance work after the machine has stopped and it has been removed

8

Maintenance

from the power.

GENERAL

1. Disconnect the power and pull out the plug before cleaning machine. Rotate the octagonal knob out anti-

clockwise, take o󰀨 the scraper from the right side. Rotate the basin clockwise and take it out.

2. The machine must be cleaned after work every day, every part that comes into contact with the food must

be cleaned and reassembled.

3. Don’t use water detergents, industrial cleaners, iron brush, hoses, or submerge the machine in water or

any other liquid. Only use mild detergents and wet cloths to clean that parts that come into contact with

food.

MACHINE MAINTENANCE AND DAILY INSPECTION

Note: Please unplug the power before servicing the machine, make sure the machine is completely

disconnected from the power.

REGULAR MAINTENANCE

1. Regularly maintain the cutting mixer machine to e󰀨ectively extend the service life.

2. Periodically clean the cutting mixer machine to ensure food quality and safety.

DAILY INSPECTION OF KEY COMPONENTS

1. Cutting blade.

Check the cutting blade whether rmly installed, if there is any damage, and before starting the machine.

2. Belt.

The belt should be regularly adjusted, after 2-3 years belts should be replaced, it is necessary to contact

Omcan for parts and service.

3. Cable.

Regularly check the cable, replace if necessary, please contact Omcan.

9

Parts Breakdown

Model FP-CN-0010 47191

10

Parts Breakdown

Model FP-CN-0010 47191

Item No. Description Position Item No. Description Position Item No. Description Position

AI128 Rear Bearing Cap for 47191 1 AI152 Locking Handle for 47191 25 AI176 Capacitor of Motor for 47191 49

AI129 Rear Bearing Gland for 47191 2 AI153 One-Way Thrust Ball Bearing for 47191 26 AI177 Push Button for 47191 50

AI130 Gasket of Shaft End for 47191 3 AI154 Sleeve for 47191 27 AI178 Push Button for 47191 51

AI131 Knife Shaft for 47191 4 AI155 Scraper for 47191 28 AI179 Power Cable for 47191 52

AI132 Deep Groove Ball Bearing 6205 for

47191 5 AI156 Reducer for 47191 29 AI180 Bearing Cap of Motor for 47191 53

AI133 Belt Wheel for Knife Shaft for 47191 6 AI157 Press Plate for 47191 30 AI181 Cover Shaft for 47191 54

AI134 Front Bearing Gland for 47191 7 AI158 Plastic Pad for 47191 31 AI182 Wire Holder for 47191 55

AI135 Deep Groove Ball Bearing 6006 for

47191 8 AI159 Meat Scraper for 47191 32 AI183 Motor for 47191 56

AI136 Front Bearing Cap for 47191 9 AI160 Cover for 47191 33 AI184 Belt Wheel 1 of Motor for 47191 57

AI137 Oil Seal of Framework for 47191 10 AI161 Table for 47191 34 AI185 Motor Bracket Plate 2 for 47191 58

AI138 Knife Sleeve 1 for 47191 11 AI162 Foot Mounting Plate 1 for 47191 35 AI186 Belt for 47191 59

AI139 Knife for 47191 12 AI163 Bottom for 47191 36 AI187 Belt Wheel 2 of Motor for 47191 60

AI140 Knife Sleeve 2 for 47191 13 AI164 Leg for 47191 37 AI188 Motor Mounting Shaft for 47191 61

AI141 Knife for 47191 14 AI165 Top Column for 47191 38 AI189 Motor Bracket Plate 1 for 47191 62

AI142 Knife Sleeve 3 for 47191 15 AI166 Foot Mounting Plate 2 for 47191 39 AI190 Belt for 47191 63

AI143 Knife for 47191 16 AI167 Rubber Gasket for 47191 40 AI191 Belt Wheel of Reducer for 47191 64

AI144 Locking Knife Nut for 47191 17 AI168 Locker for 47191 41 AI192 Fixing Sleeve for 47191 65

AI145 Pot for 47191 18 AI169 Positioning Axis for 47191 42 AI193 Motor Adjustment Bracket for 47191 66

AI146 Support Base for 47191 19 AI170 Spring for 47191 43 AI194 Deep Groove Ball Bearing 6003 for

47191 67

AI147 Press Plate for 47191 20 AI171 Octagon Knob of Locker for 47191 44 AI195 Assist Support of Reducer Shaft for

47191 68

AI148 Switch Level for 47191 21 AI172 Electrical Box Bracket for 47191 45 AI196 Stand of Magnetic Switch for 47191 69

AI149 Drive Axle for 47191 22 AI173 Electrical Box for 47191 46 AI197 Magnetic Steel for 47191 70

AI150 Octagon Knob for 47191 23 AI174 Switch Box for 47191 47 AI198 Magnetic Sensor for 47191 71

AI151 Bearing Cap for 47191 24 AI175 Capacitor of Motor for 47191 48

11

Electrical Schematics

Model FP-CN-0010 47191

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour di󰀨usion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan FP-CN-0010 User manual

Popular Kitchen Appliance manuals by other brands