Omcan MM-IT-0050-S User manual

Meat Mixer
Model MM-IT-0050-S
Item 47134
Instruction Manual
Revised - 05/12/2021
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 8
-------------------------------------------------------------------------- 8
--------------------------------------------------------------------------------------- 8 - 9
--------------------------------------------------------------------------------------- 9 - 11
--------------------------------------------------------------------------------- 11 - 14
----------------------------------------------------------------------------------- 14
----------------------------------------------------------------------------- 14 - 16
---------------------------------------------------------------------------- 17 - 19
---------------------------------------------------------------------------- 20
------------------------------------------------------------------------------------------- 21 - 22
---------------------------------------------------------------------------- 23
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Figure Drawings
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model MM-IT-0050-S

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
ATTENTION!
To help give clear explanations, some of the diagrams given in this manual show the appliance or part of
it without panels or casing. Do not use the appliance in these conditions. It must only be used when all of
the safety protections are correctly mounted and functional. The manufacturer prohibits reproduction of this
manual and or part of it and the contents cannot be used otherwise than herein specically permitted. In case
of violation the manufacturer has the right to take proceedings.

5
Safety and Warranty
FILING AND USING THIS MANUAL
This instruction manual is to give clear information, using diagrams and explanations, to the end user regarding
how to use the appliance, how to transport it, maintenance and servicing. Before using the appliance carefully
read this manual. This manual should be led (kept) near the appliance where it can be easily reached when
required. If for some reason this manual is lost or torn, request a replacement copy from either your retailer or
from the manufacturer. If the appliance is sold, immediately inform the manufacturer name, address, telephone
and fax numbers of the new owner. This manual considers the technology used when the appliance was put
on the market and therefore cannot be considered insu󰀩cient if there should be future improvements and
or updates. In regard to this point, the manufacturer is well within his/her rights to update production and
relevant manuals without obligation to update products and manuals previously sold, unless considered an
exceptional case. If in doubt, please contact your local service centre or the manufacturer. As the manufacturer
continuously strives to improve the products, he / she is pleased to receive comments or suggestions to help
improve both the appliance and manual. The warranty terms considered valid are those agreed upon when the
appliance was purchased. If you have any queries please contact your supplier.
WARRANTY
The end user for no reason whatsoever is authorized to tamper with the appliance. If there are any problems
with the appliance, contact the manufacturer. Any attempt at dismantling, modifying or tampering with the
appliance or part of it will immediately null and void the Declaration of Conformity, issued respecting the
EU directive 2006/42, 2006/95, and null and void the warranty and the manufacturer will no longer be held
responsible for damage / injuries to persons or things caused by tampering. The manufacturer will not be held
responsible for the following conditions:
• Incorrect installation.
• Incorrect use of the appliance by untrained sta󰀨.
• Used not respecting the standards and laws in force of the country.
• Lack of or insu󰀩cient and incorrect maintenance.
• Use of non-original spare parts and non-specic parts for the various models.
• Total or partial non-observance of the instructions given.
ATTENTION!
The size of the pieces to be mixed must be contained in the mixing drum and must not stick out over the rim
and must never exceed 50 kgs.
NON-PERMITTED USES
The mixer must only be used for the uses given by the manufacturer, and in particular:
• Do Not use the appliance for mixing food other than for meat.
• Do Not use the appliance if it has not been correctly installed with all the protections correctly mounted
avoiding any hazardous risk of injury.
• Do Not use nor store the machine inside a cold room: this could seriously damage the electrical
components sensitive to condensate (which forms at low temperatures) and also alter the viscosity of
the grease and/or lubricating oil in the gearboxes and cogs inside it, jeopardizing the machine’s correct
operation and causing potential failures.

6
Safety and Warranty
• Do Not touch any of the electrical parts without having rst disconnected the appliance from the electricity
supply: there is risk of electrocution.
• Do Not mix quantities that cannot be contained in the mixing drum.
• Do Not wear clothing that does not conform with the accident prevention regulations. Ask your employer
regarding safety regulations and accident prevention clothing.
• Do Not turn on the appliance if faulty or out of service. Before using the appliance make sure any
hazardous working conditions have been eliminated. If there is a fault or problem with the appliance
immediately turn it o󰀨 and inform the maintenance team.
• Do Not permit unauthorized sta󰀨 to use the appliance. In case of an electrical accident the rst thing to do
is to pull the injured worker away from the appliance (normally in this situation the worker is unconscious).
However, be very careful as this is very dangerous. The injured worker in this situation is an electricity
conductor and touching him / her means being electrocuted. It is important to disconnect the electricity
supply by disconnecting the fuse box and if this is not possible use an insulated object or material (wooden
or PVC stick, fabric, leather, etc...)to pull the injured worker away. Immediately call the nearest casualty
department so the injured worker is admitted to hospital for treatment.
• Do Not use the appliance in environments where there is gas in the atmosphere creating a high risk of
combustion (explosion).
• Do Not repair the appliance without prior authorization.
• Always Respect the procedures for maintenance and technical assistance.
PROTECTIONS AND SAFETY FEATURES
ATTENTION
Before using the appliance make sure the safety protections are in their correct position and intact. Check they
function correctly before starting work (at the beginning of a new work shift). If there are problems contact the
maintenance team.
1. Rotor protection grille. This safety feature impedes incidental contact with the rotor (Fig. 1.8.1).
2. Micro-switch (Fig. 1.8.1).
3. Knob to lock tank.
4. Ball grip for locking the rotor in position.
ATTENTION!
Do Not for any reason tamper with the safety features.
DANGER AND WARNING NOTICES
ATTENTION
When the appliance is connected to the electricity supply do not touch any of the electronics. There is the risk
of being electrocuted. Always respect the information given on the warning notices. Non-observance can cause
injuries or even death. Make sure the warning notices are always in their correct position and are legible. If for
some reason they are missing or are illegible x them to the appliance or replace them.
WORK POSITION
The correct work position for using the appliance is shown in Fig. 1.10.1.

7
Safety and Warranty
ENVIRONMENT
The appliance is designed for working in the following environment:
• Minimum environment temperature: 5 °C.
• Maximum environment temperature: +40 °C.
• Humidity: 50% at 40 °C.
LIGHTING
Where the mixer is located there should be enough natural light and articial light conforming with the local
regulations. In any case, the lighting must always conform with the regulations of the country of destination and
should not create dangerous reections. The lighting must permit the worker to clearly read the control panel
and clearly identify the start and stop buttons.
VIBRATIONS
The vibrations generated by the appliance are not signicant.
ACCIDENT PREVENTION PROTECTIONS
Specic equipment is not necessary. It is advisable to use suitable rubber gloves for handling food products
and that conform with the accident prevention regulations.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated

8
Installation
INSTALLING
ATTENTION!
The work surface or area where the appliance is to be installed must be horizontal and solid guaranteeing
stability and safety. When installing the appliance bear in mind that amp space must be left around the
appliance. Refer to the dimensions given in Fig. 2.4.1. This space allows you to work freely with the appliance
and allows easy access when servicing or repairing it. Provide suitable lighting around the appliance for the
worker using the meat mixer.
To move the package use a fork-lift truck or similar means. The appliance is in a carton box and packed on a
pallet .
• Remove the two plastic straps that hold the carton box to the pallet.
• Remove the carton box.
• Remove the cellophane wrapping and any other packaging materials.
DISPOSING OF PACKAGING
Packaging materials such as carton, nylon and wood are all products considered normal urban waste. These
Technical Specications
Model MM-IT-0050-S
Power 2 x 550W / 0.75 HP
Electrical 220V / 60Hz / 1
Tank Dimensions 16.5” x 19.7” / 420 x 500mm
Capacity 88 L / 50 kgs.
Dimensions 31.9” x 24.8” x 48” / 810 x 630 x 1220mm
Packaging Dimensions 47.2” x 26.4” x 51.2” / 1200 x 670 x 1300mm
Weight 187.4 lbs. / 85 kgs.
Packaging Weight 231.5 lbs. / 105 kgs.
Item Number 47134
Safety and Warranty
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

9
Installation
Operation
materials can be disposed of as per normal procedures. If the appliance is destined to countries where there
are specic waste laws, dispose of packaging conforming with the local laws in force.
HANDLING APPLIANCE
As the following have wheels they can be manually moved by pulling.
CONNECTING TO ELECTRICITY SUPPLY
ATTENTION!
Check the electricity supply corresponds to the value given on the appliance ID plate. Electrical works can
only be carried out by specialized and authorized sta󰀨 with prior authorization by the person in charge of the
appliance. Connect the appliance to a circuit provided with an e󰀩cient earth socket. If necessary use suitable
extension leads guaranteeing safety. The section (thickness) of the extension lead must be greater than the
appliance power supply cable. This avoids any hazardous overheating. Avoid pulling or twisting the power
cable as this can damage the internal wires.
CONTROLS AND INDICATORS
1. Drive push-button (continuous). Press to start the blade.
2. Stop push-button. Press to stop the propeller transmission motor.
3. Reverse drive push-button. Press to start the blade in opposite direction to push-button “1”.
4. Network presence indicator light. Signals that the machine is connected to the electrical network
5. Drive indicator light. Signals that the tool of the machine is in movement. Located close to the start push-
button “3” and close to the reverse drive push-button “3”. Visible only when the control is operating.
TURNING THE APPLIANCE ON AND OFF
CHECKING CONNECTION TO ELECTRICITY SUPPLY
1. Switch the on/o󰀨 switch on the appliance to position “I”.
2. Press push button “1” for starting.
3. The indicator light “4” should come on.

10
Operation
4. Then immediately press push button “2” for stopping. This is to check that the appliance works correctly.
5. Press push button “3” for starting.
6. The indicator light “5” should come on.
7. Checking that the rotor rotates in an opposite direction to before.
8. Press push button “2” for stopping.
CHECKING PROTECTIONS AND SAFETY FEATURES AND THEIR EFFICIENCY
1. Rotor Protection grille (Fig. 5.2.1). Visually check that the protection grille is intact.
2. Micro-switch (Fig. 5.2.1). With the appliance running, check that it automatically stops when the protection
grille is raised. If this is not the case contact you local authorized dealer or the manufacturer.
ATTENTION! If the previously mentioned safety protections and casing are not intact, are damaged,
missing or work incorrectly, turn the appliance o󰀨 and contact the aftersales assistance to repair the
appliance.
TURNING ON THE APPLIANCE
Switch the power on/o󰀨 switch from position “0” to “I”. Press push button “1” (g. 4.1.1) for starting the rotor.
TURNING OFF THE APPLIANCE
To stop the appliance press push button “2” (stops the electric motor), the indicator light “4” will go out. Switch
the power on/o󰀨 switch to position “0” turning o󰀨 the power supply.
INVERSION
To invert rotor rotation press push button “3”.
Note: When a work shift is over always switch the on/o󰀨 power switch to position “0”.
USING THE MACHINE
ATTENTION!
Only authorized sta󰀨 can use the appliance. Before use the worker must make sure that all the protections
are in place and work correctly. If this is not the case, turn the appliance o󰀨 and contact the maintenance
team. Make sure there is su󰀩cient lighting for clear and good visibility. Carry out several practice runs, without
any food product, assisted by specialized sta󰀨 to become familiar with the appliance so as to work in safe
conditions.
HOW TO USE THE MIXER
With the on/o󰀨 switch in position “0” ll the mixer. The food product to be mixed must be contained within the
mixing drum and must not exceed the consented weight. Close the grille and start the mixer.
N.B: to preserve the freshness and integrity of the meat, we recommend working the meat at a

11
Operation
Maintenance
maximum temperature of 7°C and terminating the process within 10 minutes. Once the meat has been
processed, thoroughly clean all the machine parts. After every work cycle, we recommend leaving
the mixer to rest for a few minutes before using it again. The machine is not designed for working
inside a cold room: this could seriously damage the electrical components sensitive to condensate
(which forms at low temperatures) and also alter the viscosity of the grease and/or lubricating oil in
the gearboxes and cogs inside it, jeopardizing the machine’s correct operation and causing potential
failures.
EMPTYING AND CLEANING
EMPTYING THE MIXING BOWL
Turn o󰀨 the mixer, the on/o󰀨 switch is in position “0” unplug from main power supply. The mixing bowl is
designed to rotate to facilitate emptying.
• With the bowl in a horizontal position grip the handle on the bowl titling bar “1” Fig. 6.3.1.
• Pull the tank locking knob “2” Fig. 6.3.1.
• Once having released the mixing bowl rotate (Fig. 6.3.2) by pulling the tilting bar “1” Fig. 6.3.1.
• Open the protection grille “3” Fig. 6.3.2 and empty the bowl.
CLEANING THE MIXING BOWL
With the machine o󰀨 and switch in position “0” and with the plug removed from the socket proceed with
cleaning the bowl. Thanks to the possibility of rotating the bowl cleaning operations are facilitated.
• With the bowl in a horizontal position grip the handle on the bowl titling bar “1” Fig. 6.3.3.
• Unhook and remove the pins which lock the mixing blades “2” in position Fig. 6.3.3 and “2” Fig. 6.3.4.
• Unscrew the bowl locking knob “3” anti-clockwise Fig. 6.3.4.
• Once having released the mixing bowl rotate (Fig. 6.3.2) by pulling the tilting bar “1” Fig. 6.3.3.
• Open the grille “4” Fig. 6.3.4 and proceed with removing the mixing blades.
• Make sure the mixing blades are positioned to allow for enough space to remove them Fig. 6.3.5.
• Grip the mixing blades one at a time “5” Fig. 6.3.4 and pull outwards to remove.
• The surface is now smooth and easy to clean Fig. 6.3.6, clean the mixer thoroughly and if necessary
disinfect.
• With a sponge soaked with water and a neutral (pH 7) and non-toxic degreaser (food grade) clean and
remove any food product left on the mixer and on the mixing blades. Do not use petrol, solvents or other
ammable liquids as detergents; only used authorised non-toxic and non-ammable solvents. Take all the
necessary precautions adopting also appropriate protections required for the cleaning product being used
when cleaning and disinfecting the mixer. Always follow the instructions provided for the cleaning product
being used.
MOUNTING UTENSILS
To mount the utensil (mixing blades) invert the procedure described in the foregoing paragraph and make sure

12
Maintenance
the mixing blades are mounted correctly. To facilitate this operation there are numbers stamped on the mixing
blades and on the pins on the inside of the bowl. The number on the blade must correspond to the number on
the pin. Once the mixing blades have been mounted close the grille.
AUTOMATIC USE
AUTOMATIC MIXER
1. Press the drive push-button “1”: the blades will start turning and the indicator light “4” will go on.
2. Press the reverse drive push-button “3”: the indicator light “5” will start ashing. After 30 seconds, the
machine will automatically reverse drive. Every 30 seconds it will invert blade rotation. After 2 minutes (4
cycles) the machine will automatically stop
AUTOMATIC SWITCH-OFF
1. Press the drive push-button “1”: the blades will start turning and the indicator light “4” will go on.
2. Press the drive push-button “1” again. After 1 minute, the machine will automatically stop. The same
sequence can be run in reverse drive.
CHECKS CARRIED OUT ON OUR PREMISES
The purchased appliance has undergone several factory tests. These tests are:
Before setting to work:
• Check operative tension in the appliance which must correspond to the customer’s requirements.
• Check that there are all the warning plates and notices and the ID plate gives all the correct information
and serial number.
• Check bolt tightening torque.
• Check that the appliance corresponds and conforms with the regulations in force and with what is given in
this manual.
With the appliance running:
• Check e󰀩ciency of all protections and safety features. When the grille is raised the appliance must
automatically stop.
• General functional check.
• Repeated tests to make sure the appliance works correctly for its use.
CHECKS AND TESTS TO BE CARRIED OUT WHEN INSTALLING
To make sure the appliance has not been damaged when delivered or when being installed, carry out the
following tests;
Before setting to work:
• Check that the power supply tension corresponds to the value given on the ID plate.
• Check that there are all the warning and ID plates and that they are not damaged.
• Check that the power supply cable is not damaged and is intact.
• Check that the safety features such as the magnetic sensors are intact and not damaged.

13
Maintenance
Functional checks with the appliance running:
• Check the e󰀩ciency of the protections and safety features. There is the possibility that during transport
these have been damaged or are out of adjustment.
• Carry out several functional tests using pieces of food that are the same size that will be used in normal
working conditions.
PERIODICAL CONTROLS
To maintain reliability and performance in time, as well as proceeding as indicated, it is necessary to carry out
regular tests and checks as follows:
Before each work shift:
• Every day check safety features and protections work correctly.
• Check the power cable is intact.
The end of the work shift:
• Carefully clean the appliance removing any traces of food.
• Remove, clean and mount rotor and blades.
CLEANING THE APPLIANCE
At the end of the work shift the appliance must be carefully cleaned and disinfected.
• Stop the appliance and switch the on/o󰀨 switch to “0” and remove the power plug.
• With a sponge soaked with water and suitable neutral degreasers (non-toxic) remove and clean any traces
of food.
Do not use petrol, solvents or other inammable liquids such as detergents. Use authorised non-toxic and non-
inammable solvents. Take suitable precautions when cleaning considering the products being used. Always
follow the instructions for use given.
ATTENTION!
These mixers are designed for mixing meat, therefore for health reasons you are obliged to use non-toxic and
neutral detergents. For hygiene purposes such detergents must be suitable for cleaning components that come
in contact with food.
LUBRICATION
Periodically grease gears “2”.
• Unplug the machine from its power source.
• Take o󰀨 the protective casing “1”.
• Grease the gears using a brush.
• Reassemble the casing and fasten the screws
The oil in the transmission reduction gears is long-life and does not need to be ever replaced.

14
Figure Drawings
Troubleshooting
Problem Cause Solution
The appliance does not start. The on/o󰀨 switch is in position 0”. Switch the switch to position “1”.
The grille is raised. Lower the grille.
The microswitch mounted on the
mixing drum does not work.
Contact Omcan.
Either the electric motor or the
command circuit board is faulty.
The controls do not work or the
blades do not change direction.
Maintenance
REPLACING PARTS
• If you require spare parts contact the manufacturer. Do not use non-original parts. We would like to remind
you that these parts must be replaced and mounted by specialised sta󰀨.

15
Figure Drawings

16
Figure Drawings

17
Parts Breakdown
Model MM-IT-0050-S 47134

18
Parts Breakdown
Model MM-IT-0050-S 47134

19
Parts Breakdown
Model MM-IT-0050-S 47134
Item No. Description Position Item No. Description Position Item No. Description Position
AG284 Cable 3x1.50 for 47134 1 61579 Mobile Wheel with Brake D 100 C/Perno
for 47134 29 62643 Flat Washer DIN 125 D 6 for 47134 55
AG285 Motor Cable 3x1.5 / MN L = 860 for
47134 2 78634 Knob for 47134 30 62644 Flat Washer DIN 125 D 8 for 47134 56
AE729 Power Cable TF TC BZ Engine for 47134 3 AG291 Mot. Pam 71 B 14 4 Poli V.230/60 for
47134 31 62645 Flat Washer DIN 125 D 10 for 47134 57
61604 Strain Relief + Nut for 47134 4 61590 Washer SO 1650 INOX for 47134 32 62646 Elastic Spine DIN 1481 3x18 for 47134 58
61603 Nut OTT.NICH.PG 11 for 47134 5 AG292 Micro SO 2400 Support for 47134 33 62647 Elastic Pin DIN 1481 5x20 for 47134 59
62605 Plastic Cable Gland PG7 for 47134 6 61569 Boat Stops Crade for 47134 34 62648 Blind Nut DIN 1587 M5 for 47134 60
AG286 Plastic Nut PG 7 for 47134 06A 61571 Spring for 47134 35 61583 Nut DIN 1587 M 6 for 47134 61
62606 PG 11 Plastic Cable Gland for 47134 7 61570 Pin for 47134 36 62650 P Nut DIN 1587 M8 for 47134 62
AG287 Plastic Nut PG 11 for 47134 07A 61564 Lever Rod for Container Overturning
for 47134 37 62651 Blind Nut DIN 1587 M 12 for 47134 63
62607 Essacavo + Dado Plastica PG for 47134 8 AG293 Female Shovel for 47134 38 62652 T ES. DIN 439 M 10 Basso for 47134 64
AG288 Plastic Nut PG 13.5 for 47134 08A AG294 Male Shovel for 47134 39 62653 Feathers DIN 6885 / A 8x7x28 for 47134 65
61549 Box GW 44207 for 47134 9 AG295 Shovel for 47134 40 62654 Feathers DIN 6885 / AB 8x7x16 for
47134 66
61608 Terminal Comb. BZ for 47134 10 AG296 Cot INOX ME 50 EVO BIALB for 47134 41 62655 Screw TBEI ISO 7380 M 6x25 for 47134 67
37258 Microswitch SO INOX for 47134 11 AG297 Bath Lid ME 50 EVO BIALB for 47134 42 AE740 Screw Autof.TC + DIN 7981 D 3.5x16
for 47134 68
37260 Magnet M634 P-44 for 47134 12 AG298 Union Tube Bases ME 50 EVO BIALB
for 47134 43 62657 Screw TSPEI DIN 7991 M8x20 for 47134 69
AE730 Mascher. Three Puls. Acc. TC-ME H =
36 for 47134 13 62631 Carter Motore ME 80 EVO BIALB for 47134 44 62658 Screw TSPEI DIN 7991 M 8x30 for 47134 70
60396 Stainless Steel On Button with Lamp
for 47134 14 62632 Fascia Carter Mot. ME 80 EVO BIALB for 47134 45 AG301 Screw TSPEI DIN 7991 M 6x16 for 47134 71
60397 Stainless Steel Off Button for 47134 15 AG299 Base DX Rid. ME 80 EVO BIALB for
47134 46 62660 Washer F Wide DIN 9021 D 6x18 for 47134 72
41224 Circuit Board R3+Autom EQ for 47134 16 AG300 Base SX ME 80 EVO BIALB for 47134 47 62661 Hex.Socket Head Cap Screw M6x20
for 47134 73
61586 Bearing 6205 ZZ for 47134 17 61592 Flange Support ME 80 EVO BIALB for
47134 48 62662 Screw TE DIN 933 M8x16 T.F. for 47134 74
61597 Bearing Reg. SP 7205 ME 80 Evo for
47134 18 61605 Ring Gear ME 80 EVO for 47134 49 62663 X.Screw DIN 933 M8x20 for 47134 75
61589 Cap 40/7/C Pulley 1C SO1650 for 47134 19 62638 Staffa Blocco Riduttori ME 80 EVO for
47134 50 62664 Screw TE DIN 933 M 10x20 T.F. for 47134 76
61596 Gasket 40-62-7 for 47134 20 62670 B Overload Protection EQ for 47134 50 62665 Screw TE DIN 933 M 12x30 T.F. for
47134 77
61610 Zinc Washer M8x30 H4 for 47134 21 62639 Ridut. CM50 71 B14 I50 80 EVO BIALB
for 47134 51 62666 Hex.Nut DIN 934 M8 for 47134 78
AG289 Dist. Rid-Corona SP47 ME EVO LAV.
for 47134 22 60080 Screw Poeliers M 5x12 for 47134 51 62667 Flathead CSK Screw DIN 963 M5x25 for 47134 79
61609 Door Screw 10x6x4 ME BA EVO for
47134 24 61585 Shaft Support SX EVO BIALB for 47134 52 62668 Self-Lock Nut ES DIN 982 M 6 High for 47134 80
AG290 Bush BZ SYN. 15x22x28 L = 19 H = 7
for 47134 25 60079 Self-Locking Nut ES DIN 982 M 5 High for 47134 52 62669 Poeliers M 4x10 Screw for 47134 81
66642 Handle for 47134 26 61595 Transc. Pin FEMM L = 220 M and 120
EVO for 47134 53 60081 Screw Poeliers M 6x10 for 47134 82
79656 Knob for Fixing Container for 47134 27 AE738 Din Guide Omega H.7mm L = 20mm
for 47134 53 AG302 16 UF Capacitor for 47134 90
61556 Stainless Steel Non-Swivel.Caster D.100
for 47134 28 61598 Transc. Pin MASC L = 220 ME 120 EVO for 47134 54

20
Electrical Schematics
Model MM-IT-0050-S 47134