Omcan Ce-cn-0004-p User manual

Revised - 08/16/2021

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Pasta Cookers

Models CE-CN-0004-P, 0008-P

Items 41882, 41883

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

-------------------------------------------------------------------------- 5

-------------------------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------------- 6

------------------------------------------------------------------------------------ 6 - 7

------------------------------------------------------------------------------------- 7

----------------------------------------------------------------------------- 8 - 10

---------------------------------------------------------------------- 11 - 12

------------------------------------------------------------------------------------------- 13 - 14

--------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model CE-CN-0004-P / Model CE-CN-0008-P

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

Safety and Warranty

General Information

Do not overll water into water pan, the appliance has been installed with a thermal cut out to avoid over

heating or damage to the element. If the power cord is damaged, it must be replaced by qualied technician.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5

Safety and Warranty

1 YEAR PART AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste

and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model CE-CN-0004-P CE-CN-0008-P

Capacity 9 L / 9.5 QT 9 L / 9.5 QT (x2)

Number of Circular Baskets 4 8

Number of Rectangular Baskets 2 4

Maximum Temperature 110°C / 230°F

Power 3600 W 7200 W

Electrical 240V / 60Hz / 1

Dimensions 14” x 21.5” x 18.5”

356 x 546 x 470mm

28” x 21.8” x 19”

711 x 552 x 483mm

Packaging Dimensions 21” x 24” x 20”

540 x 620 x 500mm

47” x 36” x 24”

1194 x 914 x 610mm

Weight 34 lbs. / 15.5 kgs. 66 lbs. / 30 kgs.

Packaging Weight 40 lbs. / 18 kgs. 109 lbs. / 49.4 kgs.

Item Number 41882 41883

6

Operation

Maintenance

Open the water inlet, make sure the water line is under the overow holes position.

Plug in the socket, switch on. Turn the thermostat dial to the max position, the red light is on, the element starts

working.

When the water is boiling, put the pasta in the basket and cook.

After cooking, turn the thermostat dial to the min position for next cooking cycle.

When not using, turn off the thermostat to the minimum position, switch off the power, unplug the unit.

Caution: the water must be over the elements.

Proper cleaning after each use

Open the water outlet, drain all of the chamber’s water, then clean using warm soapy water. After cleaning,

close the water outlet.

Do not immerse completely in water to clean.

The appliance is not to be cleaned with a water jet.

Installation

Remove the Pasta Cooker from its packaging and place the unit on a rm and level surface.

When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative

nished, etc., it is recommended that they be made of non-combustible material, if not, they must be tted with

a suitable non-combustible heat-insulating material, and that the closest attention be paid to re prevention

regulations.

Once the Pasta Cooker has been placed in position by consulting International Standards and regulations.

Connect the water pipes, Make sure the water inlet, outlet and overow are in correct position according to the

marks.

Open the overow valve, close the outlet valve.

The Pasta Cooker is now ready to operate.

7

Troubleshooting

If the Pasta Cooker does not work, please check the following:

Problem Fault Solution

The unit does not receive power. The electrical supply is incorrect. Plug the unit into the correct

electrical supply.

The unit does not heat the water. The thermostat is set to the

minimum position.

Set the thermostat to the maximum

position.

The heating element is coated in

lime scale.

Clean the lime scale off the

elements.

Maintenance

DELIMING

The pasta cooker MUST be delimed periodically (depending upon usage, every 3-4 weeks). Follow the

deliming agent manufacturer’s instructions. Rinse thoroughly at least 3 times before using the pasta cooker

after deliming.

The pasta cooker should be cleaned after each day’s operation; however, it may require cleaning more often,

depending on the volume of production. A clean boiler performs better and more safely, produces higher quality

product and reduces maintenance costs. When cleaning, always consider safety rst. Ensure all power is off

and the unit has been disconnected from the power source.

Warning: Allow the pasta cooker and the water to completely cool before cleaning.

FAILING TO DESCALE HEATING ELEMENTS WILL VOID WARRANTY

8

Parts Breakdown

Model CE-CN-0004-P 41882

9

Parts Breakdown

Model CE-CN-0008-P 41883

10

Model CE-CN-0004-P 41882

Parts Breakdown

Model CE-CN-0008-P 41883

Item No. Description Position Item No. Description Position Item No. Description Position

72854 Element for 41882 1 72862 Door for 41882 11 72872 Side Filter for 41882 21

72855 O-Ring for 41882 2 72864 Tracks for 41882 12 72873 Filter for 41882 22

72856 Silicone Gasket for 41882 3 72865 Feet for 41882 13 72874 Lid for 41882 23

72857 Teon Gasket for 41882 4 72866 Base for 41882 14 72875 Hanger for Baskets for 41882 24

72858 Platen for 41882 5 72871 Plug and Lead for 41882 15 66638 Connector 2 for 41882 25

66285 Basket Square for 41882 6 72853 Basket Round for 41882 16 66639 Connector 3 for 41882 26

72863 Indicator Light for 41882 7 72868 Out Valve for 41882 17 66640 Out Valve 2 for 41882 27

72860 Thermostat for 41882 8 72867 Connector for 41882 18 66641 Connector 4 for 41882 28

72859 Switch for 41882 9 72869 Thermal Cut Out for 41882 19 AF724 Bottom Drain with Screw for 41882 29

72861 Knob for 41882 10 72870 Element Cover for 41882 20

Item No. Description Position Item No. Description Position Item No. Description Position

72854 Element for 41883 1 72859 Switch for 41883 9 72867 Connector for 41883 18

72855 O-Ring for 41883 2 72861 Knob for 41883 10 72869 Thermal Cut Out for 41883 19

72856 Silicone Gasket for 41883 3 72839 Door for 41883 11 72870 Element Cover for 41883 20

72857 Teon Gasket for 41883 4 72841 Tracks for 41883 12 72872 Side Filter for 41883 21

72858 Platen for 41883 5 72865 Feet for 41883 13 72873 Filter for 41883 22

66285 Basket Square for 41883 6 72843 Base for 41883 14 AF724 Bottom Drain with Screw for 41883 24

72863 Indicator Light for 41883 7 72853 Basket Round for 41883 16 72852 Hanger for Baskets for 41883

72860 Thermostat for 41883 8 72868 Out Valve for 41883 17

11

Electrical Schematics

Model CE-CN-0004-P 41882

12

Electrical Schematics

Model CE-CN-0008-P 41883

13

Notes

________________________________________________________________________________________

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan CE-CN-0004-P User manual

Popular Pasta Maker manuals by other brands