Omconnect OX User manual

USER MANUAL
Smart Safe OX & OX Pro

What’s Included
P. 1
Smart Safe OX x 1 Mechanical Key × 2
M6 Screw Driver × 1
M6 Wall-Mount Screw × 2
Reset Tool × 1
Hello Card × 1

Specification
Model
Unlock Mechanism
Battery
Material
Bluetooth, PIN Code, App, Mechanical Key
P. 1
OX & OX Pro
Galvanized steel
4×AA Battery
P. 2
285mm
400mm
300mm

Lock&Unlock
Emergency
Battery
Mobile Control
Burglar Alarm
Administrator Unlock
.......
User Unlock
This Smart Safe allows to add up to 200 user PIN
codes for your family and friends.
Bluetooth Unlock Remote Sharing
Mobile Administrator
With your Mobile app you could unlock the Safe by
swiping the to the right.
You could generate offline code through mobile App and
let your friends and family access the Safe.
Set Administrator PIN Codes on your Mobile to
unlock, add members, delete members, etc.
Battery Life
The battery lifetime will be 12 months for operating.
Low Battery
When the batteries run out of power, system
will remind you to replace the batteries.
When the power is down, we can use
Mechanical Key to open the Safe.
Emergency Unlocked
Set a Master Administrator PIN for Unlocking,
settings, operations etc. And only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong passwords for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
BLE broadcasting turns to sleep mode if no
operation.
The alarm will be activated if anyone attempts to destroy the Safe,
and the High decibel buzzer will be turned on.
Features
P. 2
P. 3

>. Please use the 2 mounting screws to fix the safe on your wall or cabinet.
Installation
Reset Button
P. 3
P. 4
Quick Start
Step 1>Install Battery
>. Put 4 × AA Battery into the battery dock.

Step 2>Download Mobile App
P. 4
P. 5
Activate Bluetooth to enter pairing mode
Step 3>Add Device
>1. Scan QR Code below to download the App and turn on your mobile Bluetooth. You can also choose to download other App
supported by Tuya.
> 1. Tap + 9 + + admin code + , when you see the light slowly blinks in blue then you are ready to pair

P. 5
P. 6
>2. Go to App Home page, click “Add Device” or click “+” on the upper right.

P. 6
P. 7
>3. You will see the detected device and click “Go to add”.

P. 7
P. 8
>4. Connecting, you need to wait for a few seconds to let it finish.
>5. Device added

>2. Right after the 2 beeps please key in:
Initial admin code+ + new admin code+ +new admin code again+ , when you hear a long beep with green light the admin
code has been changed.
P. 8
P. 9
Administrator is required to reset the admin code before adding other user codes.
Step 4>Change Admin Password-Initial Admin Password:123456
>1. Tap and hold for 3 seconds and release, you will be hearing 2 quick beeps.

2. Add User Password
3. Delete User Password
5. System Lock-down
The Smart Safe will Lock-down for 5 minutes if entering wrong password continuously 5 times.
4. Delete All User Passwords
Tap + 0 + until the blue light blinks
>. Enter admin password +
>. Enter new user password +
>. Enter new user password again and press
>. When the (Enter button) blinks in green, user password has been set.
Tap + 2 + until the blue light blinks
>. Enter admin password and press
>. Enter the user password you wish to delete and press
>. Enter the user password again and press
>. When the (Enter button) blinks in green the password has been deleted.
7. Reset Factory Mode
Use the reset tool press and hold the reset button for 5 seconds until a long beep.
6. Virtual digits-Anti Peeping
Add any digits before and after the correct password the Safe unlock as always.
Tap + 00000 + until the blue light blinks
>. Enter admin password and press
>. When the (Enter button) blinks in green, all user passwords have been deleted.
P. 9
P. 10
Administrator is required to reset the admin code before adding other user codes.
Mechanical Instructions
Password & Factory Mode:
Bluetooth broadcasting & re-connecting:
Tap any key to activate the Bluetooth, App & Device will get reconnected each other.
Password must be 6 digits (no more or less)
1. Password Length
Bluetooth will turn to sleep mode and lights out if no operations within 1 minute.

P. 10
P. 11
App Instructions
You will see all devices on the home page.
Tap the Smart Safe OX to start operating.
Swipe the to the right to unlock.
How to unlock:

P. 11
P. 12
Tap “Temporary Code”
Tap “OK” to confirm and also can Tap “Share” to share this code with family or friend.
Tap “Obtain Password” to get Dynamic code which is valid for 5 minutes.
How to get Temporary code:

P. 12
P. 13
Tap “Member Management” to add family member or others.
Tap “+” to add member and edit member’s information and save.
Member will receive an invitation on the App, after he/she accept it, Admin can find the member in the list.
How to add Members:

P. 13
P. 14
Tap the Admin “Me” to add Permanent code.
Tap “Add” to enter the Permanent code you want or get Random Permanent code and save.
You are able to use the Permanent code to unlock the Safe.
How to add Permanent code:

P. 14
P. 15
Tap the Member you want to manage.
Tap “Add” to set the Permanent code for the Member and save.
Tap ”Effective Time” to set this Member is Permanent or Custom and save.
How to manage Members:
Set the validity period of Custom Member(Year/Month/Day/Hour/Minute).
Members don’t have access to Admin.

P. 16
You will find out when and whom opened the Safe.
Tap to check the Log.
How to check Opening Log:

OMUARK
www.omuark.com
31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China Copyright @ 2016 -2022 OMFOCUS TECH. All rights reserved.
P. 16
Tap ”Settings” to enable the “Arm Away”
Tap “Settings” to enable the “Remote Unlock”
How to enable Alarm :
You will be able to unlock the Safe remotely via the internet.
The alarm will be triggered if anyone attempts to destroy the Safe
How to enable Remote Unlock :
Gateway Instructions
If you have a Gateway supported by Tuya, it is available to connect the Gateway with our App.
With the Gateway, you will receive the notification on time via the internet when the alarm is triggered.
P. 17

OMUARK
www.omuark.com
31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China Copyright @ 2016 -2022 OMFOCUS TECH. All rights reserved.
www.omconnect.com / www.omuark.com
P. 17