Omega Omegaette OS-FS User manual

USA: One Omega Drive, Box 4047
ISO 9001 Certified Stamford CT 06907-0047
Tel: [phone]
FAX: [phone]
e-mail: [email protected]
Canada: 976 Bergar
Laval (Quebec) H7L 5A1
Tel: [phone]
FAX: [phone]
e-mail: [email protected]
For immediate technical or application assistance:
USA and Canada: Sales Service: 1-800-826-6342
/ 1-800-TC-OMEGA®
Customer Service: 1-800-622- 2378 /
1-800-622-BEST®
Engineering Service: 1-800-872-9436 /
1-800-USA- WHEN®
TELEX: 996404 EASYLINK: 62968934
CABLE: OMEGA
Mexico: En Espanol: [phone]-7803
e-mail: [email protected]
FAX:[phone]
[email protected]
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The
Netherlands
Tel: [phone]
FAX: [phone]
Toll Free in Benelux: 0800 0993344
e-mail: [email protected]
omega.com®
OMEGAnet® Online Service
www.omega.com
Internet e-mail
[email protected]
Servicing North America:
˜
ɖOMEGA®
Czech Republic: Rudé armády 1868, 733 01 Karviná 8
Tel: [phone]
FAX: [phone]
Toll Free: 0800-1-66342
e-mail: [email protected]
France: 11, rue Jacques Cartier, 78280 Guyancourt,
France
Tel: [phone]
FAX: [phone]
Toll Free in France: 0800 466 342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn,
Germany
Tel: [phone]
FAX: [phone]
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom: One Omega Drive, River Bend Technology
ISO 9002 Certified Centre
Northbank, Irlam, Manchester
M44 5BD United Kingdom
Tel: [phone]
FAX: [phone]
Toll Free in United Kingdom:
0800-488-488
e-mail: [email protected]
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products
to the European New Approach Directives. OMEGA will add the CE mark to every
appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA
Engineering, Inc. accepts no liability for any errors it contains, and reserves the
right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used
for, patient-connected applications.
button again to exit the set up screen. For information relating to
the emissivity of specific materials, please contact the nearest
retailer. Note: non- contact infrared thermometers are not
recommended for use in measuring the temperature of shiny or
polished metals.
LCD ERROR MESSAGES
The OS-SF incorporates visual diagnostic messages as follows:
Hi or Lo is displayed when the temperature being measured
is outside of the range of the instrument, Hi when higher than
+110ƨ(230Ʃ) and Lo when lower than -22ƨ(-8Ʃ).
Er2 is displayed when the OS-SF is
exposed to rapid changes in the ambient
temperature. Er3 is displayed when the
ambient temperature of the OS-SF
exceeds -10 or +50ƨ(14 or 122Ʃ). In
both cases you should allow plenty of
time (minimum 30 minutes) for the OS-
SF to stabilize to the working/room
temperature (0 to +40ƨ, 32 to 104Ʃ).
For all other error messages it is necessary to reset the OS-SF. To
reset the OS-SF, turn the instrument off remove the battery and
wait for a minimum of one minute, reinsert the battery and turn
on. if the error message remains please contact the Service
Department for further assistance.
BATTERIES
The OS-SF incorporates visual low battery indication as follows:
"Battery OK"
measurements are
possible
"Battery Low" battery
needs to be replaced,
measurements are
possible
"Battery Exhaused"
measurements are not
possible
OS-SF Thermometer Operating Instructions
The OS-FS thermometer is a non-contact infrared thermometer.
Simply aim the thermometer at the target and press the
measurement button to display the surface temperature. The
distance to target ratio is 1:1 therefore the thermometer should be
positioned as close to the target as possible.
ƨOR ƩMODE
To change the OS-SF from ƨto Ʃor from ƨto Ʃ, first turn
the instrument on by pressing the measurement button, then press
the mode button four times, the ƨor Ʃsymbol will flash, press
the measurement key to change to scale, then press the
measurement button to confirm the mode.
MINIMUM OR MAXIMUM MODE
To utilize the OS-SF's minimum or maximum mode, firstly turn
the instrument on by pressing the measurement button, then press
the mode button once for minimum or twice for maximum
function. The MIN or MAX icon will flash, then press the
measurement button to confirm the minimum or maximum mode.
The OS-SF will display the minimum or maximum reading only.
LOCK MODE
The lock mode is particularly useful for continuous monitoring of
temperatures. To utilize the OS-SF's lock mode, firstly turn the
instrument on by pressing the measurement button, then press the
mode button three times for the lock mode function. The lock icon
will flash, then press the measurement button to confirm the lock
measurement mode. The OS-SF will continuously display the
temperature for up to 60 minutes or until the measurement button
is pressed.
EMISSIVITY
The OS-SF infrared thermometer is supplied with a default
emissivity of 0.95. The emissivity of the OS-SF can be changed
from 0.01 (1E) to 1 (100E). Changes should only be carried out by
experienced personnel. To change the OS-SF's emissivity firstly
turn the instrument on by pressing the measurement button, then
press the mode button five times for emissivity function.
The 95E Will flash on the LCD screen, then press the
measurement button to adjust the emissivity value, press the mode

BATTERY REPLACEMENT
When the "Low Battery" icon indicates the battery is low the
battery should be replaced immediately with a HHF20-BATT
lithium cell. The battery is located under the twist cover at the rear
of the OS-SF. Please note: It is important to turn the instrument off
before replacing the battery otherwise the OS-SF may
malfunction.
Dispose of used battery properly and keep away from children.
STORAGE & CLEANING
The sensor lens is the most delicate part of the OS-SF. The lens
should be kept clean at all times, care should be taken when
cleaning the lens using only a soft cloth or cotton swab with water
or medical alcohol, allowing the lens to fully dry before using the
OS-SF, do not submerge any part of the OS-SF. The OS-SF should
be stored at room temperature between +10 to +40ƨ
(50°to 104 Ʃ).
SPECIFICATION
Range -22 to +110ƨ(-8 to 230Ʃ)
Resolution 0.1ƨor Ʃ(switchable)
Response Time 1 second
Infrared Accuracy ±2% of reading or ±2ƨ
Field of View 1:1 optics ratio
Emissivity 0.95 default - adjustable 0.01 to 1
emissivity
Battery Life 40 hours continuous use (auto power
off after 15 seconds)
Battery HHF20-BATT
Display LCD
Dimensions 18 x 37 x 68 mm
Weight 32 grams including battery
EMC/RFl
Readings may be affected if the unit is operated within a radio
frequency electromagnetic field strength of approximately 3 volts
per meter, but the performance of the instrument will not be
permanently affected.
Ċ
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of
defects in materials and workmanship for a period of 13 months
from date of purchase. OMEGA's Warranty adds an additional one
(1) month grace period to the normal one (1) year product
warranty to cover handling and shipping time. This ensures that
OMEGA's customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for
evaluation. OMEGA's Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or
written request. Upon examination by OMEGA, if the unit is
found to be defective, it will be repaired or replaced at no charge.
OMEGA's WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to
mishandling, improper interfacing, operation outside of design
limits, improper repair, or unauthorized modification. This
WARRANTY is VOID if the unit shows evidence of having been
tampered with or shows evidence of having been damaged as a
result of excessive corrosion; or current, heat, moisture or vibra-
tion; improper specification; misapplication; misuse or other
operating conditions outside of OMEGA's control. Components
which wear are not warranted, including but not limited to contact
points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its
various products. However, OMEGA neither assumes
responsibility for any omissions or errors nor assumes liability
for any damages that result from the use of its products in
accordance with information provided by OMEGA, either
verbal or written. OMEGA warrants only that the parts
manufactured by it will be as specified and free of defects.
OMEGA MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND WHATSOEVER,
EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND
ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY
DISCLAIMED. LIMITATION OF LIABILITY: The remedies
of purchaser set forth herein are exclusive, and the total
liability of OMEGA with respect to this order, whether based
on contract, warranty, negligence, indemnification, strict
liability or otherwise, shall not exceed the purchase price of
the component upon which liability is based. In no event shall
OMEGA be liable for consequential, incidental or special
damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be
used, nor shall it be used: (1) as a "Basic Component" under 10
CFR 21 (NRC), used in or with any nuclear installation or
activity; or (2) in medical applications or used on humans. Should
any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any
way, OMEGA assumes no responsibility as set forth in our basic
WARRANTY/ DISCLAIMER language, and, additionally,
purchaser will indemnify OMEGA and hold OMEGA harmless
from any liability or damage whatsoever arising out of the use of
the Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA
Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGAS
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO
AVOID PROCESSING DELAYS). The assigned AR number
should then be marked on the outside of the return package and on
any correspondence.
The purchaser is responsible for shipping charges, freight,
insurance and proper packaging to prevent breakage in transit.
FOR WARRANTY RETURNS, please have the following
information available BEFORE contacting OMEGA:
1. Purchase Order number under which the product was
PURCHASED,
2. Model and serial number of the product under warranty, and
3. Repair instructions and/or specific problems relative to the
product.
FOR NON-WARRANTY REPAIRS, consult OMEGA for current
repair charges. Have the following information available
BEFORE contacting OMEGA:
1. Purchase Order number to cover the COST of the repair,
2. Model and serial number of the product, and
3. Repair instructions and/or specific problems relative to the
product.
OMEGA's policy is to make running changes, not model changes, whenever an
improvement is possible. This affords our customers the latest in technology and
engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
©Copyright 2002 OMEGA ENGINEERING, INC. All rights reserved. This
document may not be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable form, in whole or in part, without the
prior written consent of OMEGA ENGINEERING, INC
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA... Of Course!
Shop online at www.omega.com
TEMPERATURE
Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process Monitors
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Transducers & Strain Gages
Load Cells & Pressure Gages
Displacement Transducers
Instrumentation & Accessories
FLOW/LEVEL
Rotameters, Gas Mass Flowmeters & Flow Computers
Air Velocity Indicators
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
pH/CONDUCTIVITY
pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators & Pumps
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Data Acquisition & Engineering Software
Communications-Based Acquisition Systems
Plug-in Cards for Apple, IBM & Compatibles
Datalogging Systems
Recorders, Printers & Plotters
HEATERS
Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Metering & Control Instrumentation
Refractometers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater Treatment
pH, Conductivity & Dissolved Oxygen Instruments
M3864/1102