Omnitron Systems Technology FlexPointTM OC12FF User manual

FlexPoint
FlexPoint
FlexPoint™ OC12FF
Single-mode to Multimode Fiber Converters for OC-12
TheFlexPointOC12FFsingle-modetomultimode
protocol-independentfiberconverter
SupportsallOC-12standardsoverATMand SONET
Requiresno manualconfiguration
Supportsauto-negotiation of duplex mode
Extends network distances up to 80km
Labeled status LEDs for quick and easy installation
Wall-mountor rack-mount on a5-Module shelf or ina
14-Modulepower-redundantFlexPointPowered
Chassis
Completelysoftware independent with no installation
ofdriversrequired
Peace-of mind reliability backed by a lifetime
warrantyandfree24/7technicalsupport
TheFlexPointOC12FFisaprotocol-independentfiberconverter
thatprovides reliable and cost-effective extension ofnetwork
distancesbyconnectingmultimode fiber networks or devices
oversingle-mode fibercabling.
No manual configuration is required with the plug-and-play
FlexPointOC12FF.Connectthefiber cablestothe appropriate
interface and the installation is complete.
Thefiber portoperatesat 1310nmor1550nmand featuresSC
connectors. Multimode fiber models support distances of up
to 550m, and single-mode fiber models support distances of
up to 80km.
The FlexPoint OC12FF features descriptions of the LED
indicators on the label for easy in-the-field installation and
maintenance. The LEDs report the availability of power and
the detection of devices attached to the fiber ports.
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
canalsoberack-mountedina5-Moduleshelforinahigh-density
14-Module,power-redundantPoweredChassis.
FlexPoint modules installed in the 5-Module shelf or used as
standalone devices can be powered by an externalAC to DC
power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modulesarepoweredviathe5VDCchassisconnector.
ThewidevarietyofFlexPointmountingandpoweroptionsprovide
flexible upgrade paths as network requirements change and
grow.
Simple,dependableandflexible. For overa decade,FlexPoint
mediaconvertershavebeenprovidingreliablefiberconnectivity
inEnterpriseand mission-critical networks around the world.

Trademarks are owned by their respective companies. FlexPoint is a trademark of Omnitron Systems Technology, Inc.
Specifications subject to change without notice. ©1998-2007 Omnitron Systems Technology, Inc.
091-04460-004C 12/07
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 140 Technology Dr. • Irvine, CA 92618
Port Fiber Type Distance Connector
SC Wavelength
[nm] Min. Tx Power
(dBm)
Max. Tx
Power
(dBM)
Min. Rx
Sensitivity
(dBm)
Max. Rx
Sensitivity
(dBm)
Link
Budget
(dBm)
Port 1 MM 550m 4461-X 1310 -20 -14 -26 -14 6
Port 2 SM 12km 1310 -9.5 -3 -19.5 -3 10
Port 1 MM 550m 4463-x 1310 -20 -14 -26 -14 6
Port 2 SM 34km 1310 -5 0 -23 -3* 18
Port 1 MM 550m 4469-x 1310 -20 -14 -26 -14 6
Port 2 SM 80km 1550 -5 0-26 -3* 18
Power Adapter Kits (-x): -0 = No power adapter included, -1 = 110-120 VAC/60 Hz (US plug), -2 = 100-240 VAC/50-60 Hz (IEC plug, no power cord)
For other power and fiber configurations, contact Omnitron.
*When using these models in pairs, a minimum attenuation of 3dB is required.
Model Type OC12FF
Protocols OC-12
Fiber Cables Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Fiber
Connectors SC
LED Displays Power, Fiber Link/Activity
Dimensions W: 3.0" x D: 4.0" x H: 1.0"
Weight 6 oz. (without power adapter)
Compliance UL, CE, FCC Class A
Barrel
Connector Molex Connector
Power
Requirements NominalVoltage:
Voltage Range:
Power Nominal:
Maximum Power:
9VDC
6.0 to 15.0VDC
0.2A @ 9VDC
1A @ 9VDC
5VDC
4.75 to 5.25VDC
0.5A @ 5VDC
0.75A @ 5VDC
Temperature 0 to 50
o
C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (Hours) Module without Power Adapter: 2,600,000
Module with Power Adapter -1: 250,000
Module with Power Adapter -2: 100,000
TheFlexPointOC12FFfiberconvertercan extend the network
across single-mode fiber with distances up to 80km. In this
application,thecustomer's router is connected to anAdd Drop
Multiplexer(ADM)providingaccesstotheSONETringusing a
pair of FlexPoint OC12FF fiber converters. The converters
providethemultimodetosingle-modeconversion.