Omron V780-Series User manual

UHF RFID System
V780-series
Reader/Writer
User’s Manual (EtherNet/IPTM)
Z402-E1-01
V780-HMD68-EIP-JP
V780-HMD68-EIP-US

Copyrights
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior
written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-quality products, the information contained in this manual is
subject to change without notice. Every precaution has been taken in the preparation of this manual. Neverthe-
less, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages
resulting from the use of the information contained in this publication.
• Microsoft, Windows, Windows Vista, Excel, Internet Explorer, and Visual Basic are either registered trademarks or
trademarks of Microsoft Corporation in the United States and other countries.
• EtherNet/IP is a registered trademark of ODVA, Inc..
• Java and other trademarks that contain “Java” are the registered trademarks of Oracle Corporation or its related
companies.
Other company names and product names in this document are the trademarks or registered trademarks of their
respective companies.
Trademarks
NOTE

1
Introduction
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Introduction
Thank you for purchasing a V780-HMD68-EIP- RFID System. This manual contains information
that is necessary to use the V780-HMD68-EIP-. Please read this manual and make sure you
understand the functionality and performance of the Reader/Writer before you attempt to use it in an
RFID system.
Keep this manual in a safe place where it will be available for reference during operation.
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems
• Personnel in charge of designing FA systems
• Personnel in charge of installing and connecting FA systems
• Personnel in charge of managing FA systems and facilities
This manual covers the following products.
• V780-series Reader/Writers for UHF RFID Systems for 920-MHz-band Moving Object Differentiation
Wireless Facilities
• V780-HMD68-EIP-JP
• V780-HMD68-EIP-US
Intended Audience
Applicable Products

Terms and Conditions Agreement
2UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Terms and Conditions Agreement
zExclusive Warranty
Omron’s exclusive warranty is that the Products will be free from defects in materials and workman-
ship for a period of twelve months from the date of sale by Omron (or such other period expressed in
writing by Omron). Omron disclaims all other warranties, express or implied.
zLimitations
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF
THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based
on infringement by the Products or otherwise of any intellectual property right.
zBuyer Remedy
Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally
shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-
plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal
to the purchase price of the non-complying Product; provided that in no event shall Omron be
responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products
unless Omron’s analysis confirms that the Products were properly handled, stored, installed and
maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies
shall not be liable for the suitability or unsuitability or the results from the use of Products in combi-
nation with any electrical or electronic components, circuits, system assemblies or any other materi-
als or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-
SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on
which liability is asserted.
Warranty, Limitations of Liability
Warranties
Limitation on Liability; Etc

3
Terms and Conditions Agreement
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Omron Companies shall not be responsible for conformity with any standards, codes or regulations
which apply to the combination of the Product in the Buyer’s application or use of the Product. At
Buyer’s request, Omron will provide applicable third party certification documents identifying ratings
and limitations of use which apply to the Product. This information by itself is not sufficient for a com-
plete determination of the suitability of the Product in combination with the end product, machine, sys-
tem, or other application or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system. Buyer shall take applica-
tion responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE
HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-
MENT OR SYSTEM.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or
any consequence thereof.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for
the user in determining suitability and does not constitute a warranty. It may represent the result of
Omron’s test conditions, and the user must correlate it to actual application requirements. Actual perfor-
mance is subject to the Omron’s Warranty and Limitations of Liability.
Product specifications and accessories may be changed at any time based on improvements and other
reasons. It is our practice to change part numbers when published ratings or features are changed, or
when significant construction changes are made. However, some specifications of the Product may be
changed without any notice. When in doubt, special part numbers may be assigned to fix or establish
key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Information presented by Omron Companies has been checked and is believed to be accurate; how-
ever, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
Application Considerations
Suitability of Use
Programmable Products
Disclaimers
Performance Data
Change in Specifications
Errors and Omissions

Safety Precautions
4UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Safety Precautions
The following notation and alert symbols are used in this User’s Manual to provide precautions required
to ensure safe usage of the V780-HMD68-EIP- Reader/Writer.
The safety precautions that are provided are extremely important to safety. Always read and heed the
information provided in all safety precautions.
The following notation is used.
Definition of Precautionary Information
Alert Symbols
The triangle symbol indicates precautions (including warnings).
The specific operation is shown in the triangle and explained in text.
This example on the left indicates a general precaution.
The filled circle symbol indicates operations that you must do.
The specific operation is shown in the circle and explained in text.
This example on the left shows a general precaution for something that you must do.
Warnings
The V780-HMD68-EIP-JP can be used only in the Japan.
The V780-HMD68-EIP-US can be used only in the United States and Canada.
Falling when working in high locations may result in injury. Do not work anywhere that the
footing is not stable.
Injury may occur if the Reader/Writer falls and strikes a person. Observe the following pre-
cautions when installing the Reader/Writer.
• Do not work when there are persons below you.
• Observe all torque specifications for bolts.
WARNING
Indicates a potentially hazardous situation which, if not avoided, will
result in minor or moderate injury, or may result in serious injury or
death. Additionally there may be significant property damage.
WARNING

5
Precautions for Safe Use
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Precautions for Safe Use
Observe the following precautions to ensure safety.
• The Reader/Writer may be damaged it if falls from a high location. When you transport Reader/Writ-
ers, do not stack them too high.
• Injury may occur if the Reader/Writer falls. Do not let the Reader/Writer fall when you carry it.
• The Reader/Writer weighs approx. 3 kg. It may be damaged if it falls. Use slip-resistant gloves when
you install the Reader/Writer and hold the Reader/Writer securely at the depressions with both
hands.
• The Reader/Writer may be damaged. Wire it correctly.
• The cables may break. Confirm cable specifications and do not bend cables past their normal bend-
ing radius.
• The Reader/Writer may be damaged. Never use an AC power supply.
• Connect the Ethernet cable to a host device (e.g., Switching Hub or PLC) that supports STP and
ground the host device to a ground resistance of 100 Ωor less.
• The communications range depends on the operating and installation environment. Use the
Reader/Writer only after sufficiently testing operation onsite.
• If multiple Reader/Writers are installed near each other, communications distances may decrease
due to mutual interference. Refer to A-5 Mutual Interference of Reader/Writers (Reference Only) on
page A-10 and check to make sure there is no mutual interference between Reader/Writers.
• If an error is detected in the Reader/Writer, immediately stop operation and turn OFF the power sup-
ply. Consult with an OMRON representative.
• Using thinner, benzene, acetone, or kerosene may adversely affect the plastic parts and case coat-
ing. Refer to A-6 Chemical Resistance of the Reader/Writers on page A-12 and do not use any chem-
icals that would have a negative effect.
• Dispose of the Reader/Writer as industrial waste.
Transportation
Installation and Removal
Wiring
Usage
Errors and Failures
Maintenance
Disposal

Precautions for Correct Use
6UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Precautions for Correct Use
Always observe the following precautions to prevent operation failures, malfunctions, and adverse
effects on performance and equipment.
• Always use the packing box that comes with the Reader/Writer when you transport it, and do not sub-
ject it to excessive vibration or shock.
• After you tighten the bolts, make sure that the Reader/Writer is securely attached.
Do not use or store the Reader/Writer in the following locations.
• Locations subject to combustible gases, explosive gases, corrosive gases, dust, dirt, metal powder,
or salt
• Locations where the specified ambient temperature or ambient humidity range is exceeded
• Locations subject to extreme temperature changes that may result in condensation
• Locations where the Reader/Writer would be directly subjected to vibration or shock exceeding spec-
ifications
• Locations subject to water exposure that exceeds the specifications
• Injury or damage may occur if the Reader/Writer falls. Implement safety measures so that the
Reader/Writer will not fall.
• To use the Reader/Writer in Run Mode, connect the control signal to +24 VDC of the power supply. If
you connect the control signal to the 0-V side of the power supply, the Reader/Writer will start in Safe
Mode.
• The Reader/Writer may be destroyed. Do not exceed the rated voltage range.
• The Reader/Writer may fail if it is used with a damaged cable. Do not subject the cable to strong
forces or place heavy objects on the cable.
• Observe the tightening torque specifications for the power supply and communications connectors.
• The Reader/Writer may fail or become unreliable if heat cannot be dissipated sufficiently. Ensure that
heat can be dissipated around the Reader/Writer.
• Do not use the Reader/Writer outdoors.
• Do not attempt to disassemble, repair, or modify the Reader/Writer.
Transportation
Installation
Installation and Storage Environment
Storage Methods
Wiring
Usage

7
Precautions for Correct Use
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
• Perform inspections both daily and periodically.
• The Reader/Writer may fail if it or its wiring is replaced while the power supply is ON. Always turn
OFF the power supply before you replace the Reader/Writer or its wiring.
• V780-HMD68-EIP-JP is a wireless facility conforming to the construction type certification of prem-
ises radio station based on the Japanese Radio Act. It cannot be used outside of Japan. Perform the
licensing procedures of the premises radio station in order to use the Reader/Writer.
Maintenance
Compliance with Laws and Regulations

Standards and Regulations
8UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Standards and Regulations
V780-HMD68-EIP-JP is a wireless facility conforming to the construction type certification of premises
radio station (920-MHz-band Moving Object Differentiation Wireless Facilities) based on the Japanese
Radio Act. It cannot be used outside of Japan.
Premises Radio Station (920-MHz-band Moving Object Differentiation Wireless Facilities) (ARIB
STD-T106 Standard)
Authentication No.: 001-P00881
Standards in Japan
QR code

9
Licensing Procedures of Premises Radio Station
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Licensing Procedures of Premises Radio
Station
V780-HMD68-EIP-JP is a wireless facility to differentiate moving object using the 920-MHz band. The
licensing procedures of the premises radio station must be performed before use. Be sure to perform
the licensing procedures before use. The licensing procedures are described in the Appendix.
Refer to Licensing Procedures of Premises Radio Station on page A-2.

Manual Structure
10 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Manual Structure
The following page structure is used in this manual.
Note This illustration is provided only as a sample. It may not literally appear in this manual.
Page Structure
4 - 7
4 Installation and Connections
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM Type) (ZXXX)
4-2 Connections and Wiring
4
4-2-1 Connecting and Removing the Reader/Writer Power Cable and Ethernet Cable
4-2 Connections and Wiring
Connect a power supply that meets the following conditions to the Reader/Writer.
1 Hold onto the connector on the Power
Cable and insert it into the power connec-
tor on the Reader/Writer.
Precautions for Correct Use
Do not apply more than 30 N of force to the connector on the Reader/Writer.
2 Turn the connector on the Power Cable clockwise
to lock it in place.
• For the Recommended Cable
Turn the cable connector clockwise until you
hear it securely lock in place.
• For Other Cables
Observe the tightening torque specifications for
the cable connectors.
Precautions for Correct Use
Pin 4 on the power supply connector is not used. Do not connect it to any terminal.
4-2-1 Connecting and Removing the Reader/Writer Power Cable and
Ethernet Cable
Power Supply
Item Condition
Supply voltage 24 VDC −15% to +10%
Output current 500 mA min.
Safety standard SELV (Safety Extra Low Voltage)
Connecting Method
Pin No. Name Description I/O
---V42+P421
2CONT
Control signal (operating mode signal)
*1. Run Mode: Connect to +24 V and
then start the Reader/Writer.
Safe Mode: Connect to 0 V and
then start the Reader/Writer.
IN
---V0N423
---------4
Reader/Writer Power Connector
Connector on Power Supply Cable
Level 1 heading
Level 2 heading
Level 3 heading
Level 2 heading
A step in a procedure
Manual name
Special information
Level 3 heading
Page tab
Give the current
headings.
Indicates a procedure.
Icons indicate
precautions, additional
information, or
reference information.
Gives the number of the
main section.

11
Manual Structure
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Special information in this manual is classified as follows:
Precautions for Safe Use
Precautions on what to do and what not to do to ensure safe usage of the product.
Precautions for Correct Use
Precautions on what to do and what not to do to prevent malfunction of the product or adverse
affects on performances and functions.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Version Information
Information about the differences in specifications and functions based on the version of
Reader/Writer.
Note References to detailed information or related information.
Items common to models V780-HMD68-EIP-JP/-US are written as "V780-HMD68-EIP-."
Special Information
About the Device Display

Manual Structure
12 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)

110
2A
I3
4
5
6
7
8
9
110
2A
I3
4
5
6
7
8
9
Product Overview
System Configuration
Maintenance and
Inspection
Part Names and
Functions
Installation and Connections
Appendix
Index
Preparations for Communications
EtherNet/IP Communications
Functions
Browser Interface
Troubleshooting
13
Sections in this Manual
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Sections in this Manual

CONTENTS
14 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
CONTENTS
Introduction ..............................................................................................................1
Terms and Conditions Agreement ..........................................................................2
Safety Precautions ................................................................................................... 4
Precautions for Safe Use.........................................................................................5
Precautions for Correct Use.................................................................................... 6
Standards and Regulations.....................................................................................8
Licensing Procedures of Premises Radio Station ................................................ 9
Manual Structure .................................................................................................... 10
Sections in this Manual .........................................................................................13
Revision History .....................................................................................................18
Section 1 Product Overview
1-1 Features.................................................................................................................................. 1-2
1-2 Application Flowchart ........................................................................................................... 1-5
1-3 Reader/Writer Specifications................................................................................................ 1-6
1-3-1 Appearance................................................................................................................................. 1-6
1-3-2 General Specifications ................................................................................................................ 1-6
1-3-3 Tag Communications Specifications ........................................................................................... 1-7
1-3-4 Recommended Power Supply (24 VDC)..................................................................................... 1-8
1-3-5 Dimensions ................................................................................................................................. 1-8
1-4 RF Tag Specifications ........................................................................................................... 1-9
Section 2 System Configuration
2-1 RFID System Configuration .................................................................................................. 2-2
Section 3 Part Names and Functions
3-1 Operation Indicators ............................................................................................................. 3-2
3-1-1 Names and Descriptions of Operation Indicators........................................................................ 3-2
3-1-2 Operation Indicators at Startup ................................................................................................... 3-4
3-1-3 Operation Indicators for WDT Errors........................................................................................... 3-5
3-1-4 Operation Indicators for IP Address Conflict...............................................................................3-5
3-1-5 Operation Indicators When BOOTP Server Connection Fails .................................................... 3-6
3-1-6 Operation Indicators during Command Execution ...................................................................... 3-6
3-1-7 Operation Indicators during Test Execution ................................................................................ 3-9
3-1-8 Operation Indicators for System Errors.....................................................................................3-10
3-1-9 Operation Indicators when a Timeout is Detected in a Tag Data Link....................................... 3-11
3-1-10 During Multi-Reader/Writer function use ...................................................................................3-13
3-2 Connectors........................................................................................................................... 3-15

15
CONTENTS
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Section 4 Installation and Connections
4-1 Installation.............................................................................................................................. 4-2
4-1-1 Reader/Writer ............................................................................................................................. 4-2
4-1-2 RF Tags ...................................................................................................................................... 4-4
4-2 Connections and Wiring .......................................................................................................4-6
4-2-1 Connecting and Removing the Reader/Writer Power Cable and Ethernet Cable ...................... 4-6
Section 5 Preparations for Communications
5-1 Starting the Reader/Writer .................................................................................................... 5-2
5-1-1 Procedure to Start the Reader/Writer ......................................................................................... 5-2
5-2 Setting IP Addresses............................................................................................................. 5-3
5-2-1 Preparations for Work................................................................................................................. 5-3
5-2-2 Setting the IP Address of the Reader/Writer from a Web Browser............................................. 5-5
5-2-3 Setting the IP Address of the Reader/Writer on the Network Configurator................................. 5-7
5-3 Setting Tag Data Links ........................................................................................................ 5-10
Section 6 Functions
6-1 Operation Modes ................................................................................................................... 6-3
6-1-1 Run Mode ................................................................................................................................... 6-3
6-1-2 Safe Mode .................................................................................................................................. 6-3
6-2 RF Tag Communications ...................................................................................................... 6-4
6-2-1 Single-access Communications.................................................................................................. 6-4
6-2-2 Multiaccess Communications ..................................................................................................... 6-5
6-2-3 RF Communications Modes ....................................................................................................... 6-6
6-2-4 Communications Commands....................................................................................................6-15
6-3 Reader/Writer Controls .......................................................................................................6-20
6-3-1 Initialization............................................................................................................................... 6-20
6-3-2 Resetting................................................................................................................................... 6-20
6-3-3 RESET FOCUS ........................................................................................................................ 6-20
6-3-4 Installation Location Notification .............................................................................................. 6-21
6-4 Reader/Writer Settings........................................................................................................ 6-22
6-4-1 Network Settings....................................................................................................................... 6-22
6-4-2 RF Communications Conditions: Basic Settings ...................................................................... 6-23
6-4-3 RF Communications Conditions: Advanced Settings ............................................................... 6-25
6-4-4 Device Settings......................................................................................................................... 6-31
6-4-5 Exporting/Important Configuration Files ................................................................................... 6-33
6-5 Maintenance: Device Information ...................................................................................... 6-34
6-5-1 Reading Device Information ..................................................................................................... 6-34
6-5-2 Getting the Operating Status .................................................................................................... 6-34
6-5-3 Getting and Setting Time Information .......................................................................................6-34
6-6 Maintenance: Log Information ........................................................................................... 6-35
6-6-1 Getting and Clearing the System Error Log.............................................................................. 6-35
6-6-2 Getting the Command Error Log............................................................................................... 6-36
6-6-3 Getting the Most Recent Command Error Information ............................................................. 6-36
6-7 Maintenance: Communications Information..................................................................... 6-37
6-7-1 Getting the Reception Level ..................................................................................................... 6-37
6-7-2 Getting the Noise Level ............................................................................................................ 6-37
6-7-3 Communications Diagnostics ................................................................................................... 6-38
6-8 Tuning................................................................................................................................... 6-43
6-8-1 Transmission Power Tuning ..................................................................................................... 6-43

CONTENTS
16 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
6-9 Utilities.................................................................................................................................. 6-46
6-9-1 RF Tag Access .......................................................................................................................... 6-46
6-9-2 RF Tag Scanning....................................................................................................................... 6-47
6-9-3 Reception Level Monitor ........................................................................................................... 6-48
6-9-4 Channel Monitor........................................................................................................................ 6-54
6-9-5 Focus Monitor ........................................................................................................................... 6-55
6-10 Multi-Reader/Writer Function ............................................................................................. 6-58
6-10-1 Outline....................................................................................................................................... 6-58
6-10-2 Multi-Reader/Writer Modes ....................................................................................................... 6-59
6-10-3 Application................................................................................................................................. 6-66
6-10-4 Communications conditions during Multi-Reader/Writer use .................................................... 6-74
6-10-5 Maintenance functions during Multi-Reader/Writer use ............................................................ 6-75
Section 7 Ethernet/IP Communications
7-1 Outline .................................................................................................................................... 7-2
7-1-1 EtherNet/IP Communications Protocol........................................................................................7-2
7-1-2 EtherNet/IP Communications with the Reader/Writer ................................................................. 7-3
7-1-3 Tag Data Link Setting Methods ................................................................................................... 7-4
7-1-4 Memory Assignments.................................................................................................................. 7-7
7-1-5 Update Counter/Update Counter Response ............................................................................. 7-10
7-1-6 V780 Commands ...................................................................................................................... 7-11
7-2 V780 Command Details....................................................................................................... 7-13
7-2-1 Single-access Communications Commands............................................................................. 7-13
7-2-2 Multiaccess Communications Commands ................................................................................ 7-23
7-2-3 Reader/Writer Control Commands............................................................................................7-27
7-2-4 Setting and Getting Reader/Writer Information Settings ........................................................... 7-30
7-2-5 Reader/Writer Setting Commands: Device Settings ................................................................. 7-33
7-2-6 Reader/Writer Setting Commands: Communications Settings .................................................7-37
7-2-7 Maintenance Commands: Device Information .......................................................................... 7-59
7-2-8 Maintenance Commands: Log Information ............................................................................... 7-63
7-2-9 Maintenance Commands: RF Communications Information..................................................... 7-68
7-2-10 Time Charts............................................................................................................................... 7-74
Section 8 Browser Interface
8-1 Browser Operation Interface ................................................................................................ 8-2
8-2 Operation Interface................................................................................................................ 8-4
8-2-1 Password Entry View .................................................................................................................. 8-4
8-2-2 Status .......................................................................................................................................... 8-5
8-2-3 Network Settings......................................................................................................................... 8-6
8-2-4 RF Communications Settings...................................................................................................... 8-9
8-2-5 Device Settings ......................................................................................................................... 8-13
8-2-6 Tuning ....................................................................................................................................... 8-15
8-2-7 Utilities....................................................................................................................................... 8-17
8-2-8 Logs .......................................................................................................................................... 8-26
8-2-9 Rebooting.................................................................................................................................. 8-32
8-2-10 Configuration............................................................................................................................. 8-33
8-2-11 Configuration File...................................................................................................................... 8-41
Section 9 Troubleshooting
9-1 Types of Errors ...................................................................................................................... 9-2
9-1-1 Errors Indicated on Operation Indicators .................................................................................... 9-2
9-1-2 Errors Indicated with Error Codes ............................................................................................... 9-3

17
CONTENTS
UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
9-2 Error Tables............................................................................................................................ 9-4
9-2-1 Command Errors ........................................................................................................................ 9-4
9-2-2 System Errors............................................................................................................................. 9-6
9-2-3 WDT Errors................................................................................................................................. 9-7
9-3 Errors and Countermeasures............................................................................................... 9-8
9-3-1 Command Errors ........................................................................................................................ 9-8
9-3-2 RF Tag Communications Error ................................................................................................. 9-10
9-3-3 Minor Fault................................................................................................................................ 9-14
9-3-4 Major Fault................................................................................................................................ 9-17
9-3-5 WDT Error................................................................................................................................. 9-17
9-4 Cannot Display the Web Browser Operation Window ..................................................... 9-18
9-4-1 Problem .................................................................................................................................... 9-18
9-4-2 Solution..................................................................................................................................... 9-19
9-4-3 Java installation ........................................................................................................................ 9-20
9-4-4 Java Security Settings .............................................................................................................. 9-21
9-4-5 Register Trusted Site ................................................................................................................ 9-22
Section 10 Maintenance and Inspection
10-1 Maintenance and Inspection .............................................................................................. 10-2
Section A Appendices
A-1 Licensing Procedures of Premises Radio Station .............................................................A-2
A-2 RF Tag Communications Times (for Reference Only)........................................................A-4
A-3 RF Tag Memory Map..............................................................................................................A-7
A-4 Communications Range Diagram, Reception Level Diagram (Reference Only) .............A-8
A-5 Mutual Interference of Reader/Writers (Reference Only).................................................A-10
A-6 Chemical Resistance of the Reader/Writers .....................................................................A-12
Index

Revision History
18 UHF RFID System V780-series Reader/Writer User’s Manual (EtherNet/IPTM) (Z402)
Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
Revision code Date Revised contents
A July 2018 Original production
Z402-E1-01
Revision code
Cat. No.