Omron V640 User manual

RFID SYSTEM
V640 SERIES
CIDRW SYSTEM
V640 Utility Tool
OPERATION MANUAL
V640-HAM11-ETN-V2
V640-HAM11-L-ETN-V2
Z469-E1-01

NOTE
•All rights reserved.
•No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the
prior written permission of OMRON.
•No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information con-
tained in this manual is subject to change without notice. Every precaution has been taken in the
preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omis-
sions.
Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
Trademarks
•Microsoft, Windows, .NET Framework are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Other company names and product names in this document are the trademarks or registered trade-
marks of their respective companies.
Copyrights
Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Introduction
Thank you for using CIDRW System V640-series EtherNet Type.
This manual describes how to use the "V640 Utility Tool", a Windows application software equivalent
to the WEB browser interface function installed in the V640-series amplifier units.
Please read this manual and make sure you understand the functionality and performance of the
V640-series before you attempt to use it in a CIDRW System.
Keep this manual in a safe place where it will be available for reference during operation.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing CIDRW systems.
• Personnel in charge of designing CIDRW systems.
• Personnel in charge of installing and maintaining CIDRW systems.
• Personnel in charge of managing CIDRW systems and facilities.
Applicable Products
The Windows application software "V640 Utility Tool" described in this manual is intended for the fol-
lowing amplifier units equipped with Ethernet.
• V640-HAM11-ETN-V2
• V640-HAM11-L-ETN-V2
Introduction
1
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Manual Structure
Page Structure
The following page structure is used in this manual.
4-9
4 Installation and Wiring
NJ-series CPU Unit Hardware User’s Manual (W500)
s
t
i
n
U
gnitn
u
oM
3-4
4
s
t
ne
no
p
m
o
C
rel
l
o
r
t
n
oC
g
n
i
tc
e
n
noC
1
-
3-
4
4-3 Mounting Units
The Units that make up an NJ-series Controller can be connected simply by pressing the Units together
and locking the sliders by moving them toward the back of the Units. The End Cover is connected in the
same way to the Unit on the far right side of the Controller.
1Join the Units so that the connectors fit exactly.
2The yellow sliders at the top and bottom of each Unit lock the Units together. Move the sliders
toward the back of the Units as shown below until they click into place.
Precautions for Correct UsePrecautions for Correct Use
4-3-1 Connecting Controller Components
Connector
Hook Hook holes
Slider
Lock
Release
Move the sliders toward the back
until they lock into place.
Level 1 heading
Level 2 heading
Level 3 heading
Level 2 heading
A step in a procedure
Manual name
Special information
Level 3 heading
Page tab
Gives the current
headings.
Indicates a procedure.
Icons indicate
precautions, additional
information, or reference
information.
Gives the number
of the main section.
The sliders on the tops and bottoms of the Power Supply Unit, CPU Unit, I/O Units, Special I/O
Units, and CPU Bus Units must be completely locked (until they click into place) after connecting
the adjacent Unit connectors.
Note : This page is a sample for the purpose of describing the page structure. It differs in its actual content.
Manual Structure
2V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Icons
The icons used in this manual have the following meanings.
Precautions for Safe Use
Precautions on what to do and what to avoid doing to ensure the safe use of the product.
Precautions for Correct Use
Precautions on what to do and what to avoid doing to ensure proper operation and perform-
ance.
Additional Information
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Version Information
Information on differences in specifications and functionality between versions is given.
Manual Structure
3
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Manual Structure
4V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Sections in this Manual
Sections in this Manual
5
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
1
2
3
1
2
3
Overview and Specifications
Basic Operation of V640 Utility Tool
V640 Utility Tool Features

CONTENTS
Introduction .............................................................................................................. 1
Intended Audience...........................................................................................................................................1
Applicable Products .........................................................................................................................................1
Manual Structure...................................................................................................... 2
Page Structure.................................................................................................................................................2
Icons ................................................................................................................................................................3
Sections in this Manual ........................................................................................... 5
Terms and Conditions Agreement.......................................................................... 8
Warranty, Limitations of Liability ......................................................................................................................8
Application Considerations ..............................................................................................................................9
Disclaimers ......................................................................................................................................................9
Statement of security responsibilities for assumed use cases and against threats....................................... 10
Software License Agreement ............................................................................... 11
Safety Precautions................................................................................................. 14
Definition of Precautionary Information..........................................................................................................14
Symbols .........................................................................................................................................................14
WARNING......................................................................................................................................................14
Precautions for Safe Use ...................................................................................... 16
Precautions for Correct Use ................................................................................. 17
Related Manuals..................................................................................................... 18
Revision History..................................................................................................... 19
Section 1 Overview and Specifications
1-1 Overview of Configuration Tool............................................................................................1-2
1-2 System Environment .............................................................................................................1-3
1-3 Installation and Uninstallation..............................................................................................1-4
1-3-1 Installation ...................................................................................................................................1-4
1-3-2 Uninstallation...............................................................................................................................1-4
Section 2 Basic Operation of V640 Utility Tool
2-1 Set the IP address of the computer......................................................................................2-2
2-1-1 Default IP Address Settings of the Amplifier Unit........................................................................2-2
2-1-2 Setting the IP Address of the Computer with Windows 10..........................................................2-2
2-2 Getting Started .......................................................................................................................2-3
2-3 Shutting Down........................................................................................................................2-5
CONTENTS
6V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Section 3 V640 Utility Tool Features
3-1 Window Configuration...........................................................................................................3-2
3-2 Status Window .......................................................................................................................3-3
3-3 Setting Window ......................................................................................................................3-5
3-4 Command Window.................................................................................................................3-6
3-4-1 CID R/W ......................................................................................................................................3-6
3-4-2 V640 Command ..........................................................................................................................3-8
3-5 Noise Measurement Window .............................................................................................. 3-11
CONTENTS
7
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Terms and Conditions Agreement
Warranty, Limitations of Liability
Warranties
Exclusive Warranty
Omron’s exclusive warranty is that the Products will be free from defects in materials and work-
manship for a period of twelve months from the date of sale by Omron (or such other period ex-
pressed in writing by Omron). Omron disclaims all other warranties, express or implied.
Limitations
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF
THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based
on infringement by the Products or otherwise of any intellectual property right.
Buyer Remedy
Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally
shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-com-
plying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal
to the purchase price of the non-complying Product; provided that in no event shall Omron be re-
sponsible for warranty, repair, indemnity or any other claims or expenses regarding the Products
unless Omron’s analysis confirms that the Products were properly handled, stored, installed and
maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return
of any Products by Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the use of Products in
combination with any electrical or electronic components, circuits, system assemblies or any other
materials or substances or environments. Any advice, recommendations or information given orally
or in writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CON-
SEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
Terms and Conditions Agreement
8V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY
, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on
which liability is asserted.
Application Considerations
Suitability of Use
Omron Companies shall not be responsible for conformity with any standards, codes or regulations
which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buy-
er’s request, Omron will provide applicable third party certification documents identifying ratings and
limitations of use which apply to the Product. This information by itself is not sufficient for a complete
determination of the suitability of the Product in combination with the end product, machine, system, or
other application or use. Buyer shall be solely responsible for determining appropriateness of the par-
ticular Product with respect to Buyer’s application, product or system. Buyer shall take application re-
sponsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE
HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-
MENT OR SYSTEM.
Programmable Products
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or
any consequence thereof.
Disclaimers
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for
the user in determining suitability and does not constitute a warranty. It may represent the result of
Omron’s test conditions, and the user must correlate it to actual application requirements. Actual per-
formance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on improvements and oth-
er reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may
Terms and Conditions Agreement
9
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

be changed without any notice. When in doubt, special part numbers may be assigned to fix or estab-
lish key specifications for your application. Please consult with your Omron’s representative at any
time to confirm actual specifications of purchased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be accurate; how-
ever, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
Statement of security responsibilities for assumed use cases and
against threats
OMRON SHALL NOT BE RESPONSIBLE AND/OR LIABLE FOR ANY LOSS, DAMAGE, OR EX-
PENSES DIRECTLY OR INDIRECTLY RESULTING FROM THE INFECTION OF OMRON PROD-
UCTS, ANY SOFTWARE INSTALLED THEREON OR ANY COMPUTER EQUIPMENT, COMPUTER
PROGRAMS, NETWORKS, DATABASES OR OTHER PROPRIETARY MATERIAL CONNECTED
THERETO BY DISTRIBUTED DENIAL OF SERVICE ATTACK, COMPUTER VIRUSES, OTHER
TECHNOLOGICALLY HARMFUL MATERIAL AND/OR UNAUTHORIZED ACCESS.
It shall be the users sole responsibility to determine and use adequate measures and checkpoints to
satisfy the users particular requirements for (i) antivirus protection, (ii) data input and output, (iii) main-
taining a means for reconstruction of lost data, (iv) preventing Omron Products and/or software instal-
led thereon from being infected with computer viruses and (v) protecting Omron Products from unau-
thorized access.
Terms and Conditions Agreement
10 V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Software License Agreement
You (either an individual or a legal entity, hereafter called “User”) may use this software (hereafter
called “this Software”) only when User agrees to the Software License Agreement below (hereafter
called "this agreement").
This Software License Agreement is a legal agreement between the User and OMRON Corporation
(hereafter, called “OMRON”).
By installing, copying, or otherwise using this Software, the User agrees to be bound by the terms and
conditions of this Software. If the User does not agree to these terms and conditions, do not install,
copy, or use any file of this Software.
Software License Agreement
This is a binding agreement between the User and OMRON on the terms and conditions of the license
of this Software.
1. Definition
This Software used in this agreement includes computer software, CAD data, computer programs,
sample data, associated media, printed materials such as manuals, "online" or electronic docu-
mentation, and so on.
2. LICENSE AGREEMENT
OMRON grants the User a non-exclusive and limited license to use this Software on only a com-
puter owned by the User.
3. The User may copy this Software for back-up purpose only, provided that the User shall include all
of the original proprietary notices in the obvious way.
4. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS
The User must not remove or alter any copyright notices on all copies of this Software.
5. The User shall not modify any portion of this Software. If the User modifies this Software, OMRON
assumes no responsibility for the results of any modifications made by the User, including defects
or damages of any nature.
6. The User may not distribute copies of this Software to third parties.
7. The User may not rent, lease, sub-license nor assign this Software to any third party without prior
written consent of OMRON.
8. The User may not reserve engineer, decompile, disassemble, nor otherwise attempt to discern the
source code of this Software.
9. The User must comply with all applicable laws regarding use of this Software.
10. OMRON will not provide the User with any support services related to this Software (hereafter
called "support service").
11. The specification of this Software such as software interface or configuration may be altered with-
out any notice. There are no warranties regarding binary compatibility after such specification
change.
12. CONFIDENTIALITY
The User shall treat any information contained in this Software as confidential and shall not dis-
close it to any third party. This obligation shall survive the termination of this Agreement.
13. TERMINATION
Software License Agreement
11
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Without prejudice to any other rights, OMRON may terminate this license agreement if the User
fails to comply with the terms and conditions of this agreement. In such event, the User must
destroy all copies of this Software.
14. INTELLECTUAL PROPERTY RIGHTS
All title, ownership rights and intellectual property rights in and to this Software and any copies
thereof remain the sole property of OMRON or the third party who has licensed the software to
OMRON and shall not be assigned to the User under this Agreement.
All rights not expressly granted are reserved by OMRON.
15. NO WARRANTIES
OMRON PROVIDES THIS SOFTWARE ON AN “AS IS” AND DOES NOT PROVIDE ANY WAR-
RANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTY OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THIS SOFTWARE IS
BORNE BY THE USER.
16. IN NO EVENT, INCLUDING BUT NOT LIMITED TO, SPECIFICATION CHANGE OF THIS SOFT-
WARE, SHALL OMRON BE LIABLE FOR CORRECTING ERRORS, MALFUNCTIONS OR DE-
FECTS OF THIS SOFTWARE.
17. LIMITATION OF LIABILITY
IN NO EVENT, SHALL OMRON BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS IN-
FORMATION, OR ANY OTHER PECUNIARY LOSS), EVEN IF OMRON HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
18. EXPORT CONTROL
The User shall comply with all applicable laws and regulations of Japan and/or other relevant
countries with regard to security export control, when exporting this Software and/or technical
documents or providing such products and/or documents to a non-resident. Omron may not pro-
vide the User with this Software and/or technical documents should they fail to comply with such
laws and regulations.
19. MISCELLANEOUS
This agreement constitutes the entire agreement between the parties concerning the subject mat-
ter hereof. Should any provision of this Agreement be held to be void, invalid, unenforceable or ille-
gal by a court, the validity and enforceability of the other provisions of this Agreement shall not be
affected thereby. Failure of a party to enforce any provision of this Agreement shall not constitute
or be construed as a waiver of such provision or of the right to enforce such provision. This agree-
ment shall be governed by and construed under the laws of Japan. Unless otherwise agreed in
writing, any and all dispute, controversy or difference which may arise between the parties hereto
out of or in relation to or in connection with this agreement shall be finally settled by arbitration in
Tokyo in accordance with the Arbitration Rules of the Japan Commercial Arbitration Association.
All arbitrator(s) shall be familiar with the business and transactions typified by this agreement. The
award rendered by arbitrator(s) shall be final binding upon the parties hereto.
20. Amendment of this agreement
1) OMRON may, at its discretion, amend this agreement at any time if any of the following require-
ments are satisfied;
1) if such amendment conforms to the general interest of users; or
Software License Agreement
12 V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

2) if such amendment of this agreement does not violate their purpose and is reasonable in
light of its necessity, the appropriateness of its revised contents, and other circumstances
related to the amendment.
2) In the case referred to in the preceding paragraph, OMRON makes an announcement of its in-
tention of the amendment, its revised contents, and its effective date on this website by two
weeks before it comes into effect.
The revised Terms of Use is officially released upon the effective date.
21. Australian Consumer Law (for Licensee in Australia)
In the event that this Agreement constitutes or involves a supply of goods or services to a consum-
er as defined in the Australian Consumer Law (“ACL”), nothing contained in this Agreement ex-
cludes, restricts or modifies any condition, guarantee, warranty or other obligation which is applica-
ble to or is conferred on Omron pursuant to the ACL where to exclude, restrict or modify any such
condition, warranty or other obligation is unlawful.
22. To the extent that Licensee is a consumer for the purposes of the ACL:
a) Omron goods come with guarantees that cannot be excluded under the ACL. Licensee is enti-
tled to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. Licensee is also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
b) To the full extent permitted by Law, where the benefit of any such condition, warranty or other
obligation is conferred upon Licensee pursuant to the ACL, Omron’s sole liability for breach of
any such condition, warranty, guarantee or other obligation will be limited to: (A) the replace-
ment of the goods or the supply of equivalent goods or payment of the cost of replacing the
goods or acquiring equivalent goods; or (B) the repair of the goods or payment of the cost of
having the goods repaired.
23. Consumer Guarantees Act (for Licensee in New Zealand)
In the event that Licensee is using Licensed Software for a business purpose, Licensee is deemed
to accept and have acknowledged that the Consumer Guarantees Act in New Zealand will not ap-
ply to the usage of Licensed Software. For the avoidance of doubt, Licensee shall be deemed to
be using Licensed Software for a business purpose if Licensee is acquiring, or hold itself out to be
acquiring, the Licensed Software for the purposes of:
1) resupplying them in trade;
2) consuming them in the course of a process of production or manufacture; or
3) repairing or treating in trade other goods or fixtures on land.
Software License Agreement
13
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Safety Precautions
Definition of Precautionary Information
The following notation is used in this manual to provide precautions required to ensure safe usage of
the V640-series CIDRW System.
The safety precautions that are provided are extremely important for safety. Always read and heed the
information provided in all safety precautions.
The following notation is used.
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Additionally, there may be severe property
damage.
Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate
injury, or property damage.
WARNING
Caution
Symbols
The circle and slash symbol indicates operations that you must not do.
The specific operation is shown in the circle and explained in text.
This example indicates prohibiting disassembly.
The triangle symbol indicates precautions (including warnings).
The specific operation is shown in the triangle and explained in text.
This example indicates a precaution for electric shock.
The triangle symbol indicates precautions (including warnings).
The specific operation is shown in the triangle and explained in text.
This example indicates a general precaution.
The filled circle symbol indicates operations that you must do.
The specific operation is shown in the circle and explained in text.
This example shows a general precaution for something that you must do.
The triangle symbol indicates precautions (including warnings).
The specific operation is shown in the triangle and explained in text.
This example indicates a precaution for high temperatures.
WARNING
WARNING
Security Measures
Safety Precautions
14 V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

To prevent computer viruses, install antivirus software on a computer where you use
this software. Make sure to keep the antivirus software updated.
Keep your computer's OS updated to avoid security risks caused by a vulnerability in
the OS.
Always use the highest version of this software to add new features, increase operabil-
ity, and enhance security.
Manage usernames and passwords for this software carefully to protect them from un-
authorized uses.
Set up a firewall (E.g., disabling unused communication ports, limiting communication
hosts, etc.) on a network for a control system and devices to separate them from other
IT networks. Make sure to connect to the control system inside the firewall.
Use a virtual private network (VPN) for remote access to a control system and devices
from this software.
Safety Precautions
15
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Precautions for Safe Use
For details on Precautions for Safe Use, please refer to Precautions for Safe Use in V640-HAM11(-L)-
ETN-V2/HS61/HS62 CIDRW SYSTEM USER'S MANUAL(Z361-E1).
Precautions for Safe Use
16 V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Precautions for Correct Use
For detailed precautions on the correct use of the product, please refer to Precautions for Correct Use
in V640-HAM11(-L)-ETN-V2/HS61/HS62 CIDRW SYSTEM USER'S MANUAL(Z361-E1).
Precautions for Correct Use
17
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)

Related Manuals
The followings are the manuals related to this manual. Use these manuals for reference.
Name of Manual Cat. No. Model Usage Description
V640-series CIDRW System
USER'S MANUAL
Z361-E1 V640-series
CIDRW System
When you want to
know the product
specifications and
basic settings for us-
ing the V640-series
CIDRW System
V640-series CIDRW System specifications,
installation and connection/wiring, prepara-
tion for communication, reading/writing to/
from ID tags, and browser interface are de-
scribed.
V640-series CIDRW System
Utility Tool OPERATION MAN-
UAL
Z469-E1 When you want to
know how to operate
the amplifier unit of
the V640-series
CIDRW System with
the V640 Utility Tool
V640 Utility Tool for operating the amplifier
units of the V640 series CIDRW sys-
temsV640-series CIDRW System overview,
basic operation, and features are described.
Related Manuals
18 V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)