Omron STC-MBCM200U3V Installation instructions

No.13S076-08
1/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
USB3 Vision
Monochrome / Color CMOS Camera
STC-MBCM200U3V (2M / Monochrome)
STC-MCCM200U3V (2M / Color)
STC-MBCM200U3V-NIR (2M / Near Infrared)
STC-MBCM401U3V (4M / Monochrome)
STC-MCCM401U3V (4M / Color)
STC-MBCM401U3V-NIR (4M / Near Infrared)
Product Specifications and User’s Guide

No.13S076-08
2/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Table of Contents
1 Product Precautions ............................................................................................ 8
2 Warranty ................................................................................................................ 8
3 Overview ............................................................................................................... 9
3.1 Features ....................................................................................................................................... 9
3.2 Product Number Naming Method .............................................................................................. 9
4 Specifications ..................................................................................................... 10
4.1 Electronic Specifications .......................................................................................................... 10
4.1.1 STC- MBCM200U3V / STC-MCCM200U3V .......................................................................................... 10
4.1.2 STC- MBCM401U3V / STC-MCCM401U3V .......................................................................................... 12
4.1.3 STC- MBCM200U3V-NIR / STC-MBCM401U3V-NIR ............................................................................ 14
4.2 Spectral Sensitivity Characteristics ........................................................................................ 17
4.2.1 STC-MBCM200U3V / STC-MBCM401U3V ........................................................................................... 17
4.2.2 STC-MCCM200U3V / STC-MCCM401U3V ........................................................................................... 17
4.2.3 STC-MBCM200U3V-NIR / STC-MBCM401U3V-NIR (Near IR models) ................................................ 18
4.2.4 IR Cut Filter (STC-MCCM200U3V / STC-MCCM401U3V) .................................................................... 18
4.1 Mechanical Specifications ........................................................................................................ 19
4.1.1 STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR ................................................. 19
4.1.2 STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR ................................................. 19
4.2 Environmental Specifications .................................................................................................. 20
4.2.1 STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR ................................................. 20
4.2.2 STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR ................................................. 20
4.3 External Connector Specifications .......................................................................................... 21
4.3.1 USB 3.0 micro B ................................................................................................................................... 21
4.3.2 IO Connector ........................................................................................................................................ 22
4.3.3 Reference Input Circuit ....................................................................................................................... 23
4.3.4 Reference Output Circuit .................................................................................................................... 25
5 Dimensions ......................................................................................................... 27
6 Sensor Information ............................................................................................ 28
6.1 Pixel Transferring Image ........................................................................................................... 28

No.13S076-08
3/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
7 Image Acquisition and Camera Operational Modes (GenICam) ...................... 29
7.1 Free run ...................................................................................................................................... 29
7.2 Trigger Mode .............................................................................................................................. 30
7.2.1 Frame Start Trigger .............................................................................................................................. 31
7.2.2 Exposure Start Trigger ........................................................................................................................ 32
7.2.3 Trigger Software .................................................................................................................................. 32
8 IO Function ......................................................................................................... 33
8.1 Input Port Function ................................................................................................................... 33
8.1.1 Trigger Input ......................................................................................................................................... 33
8.1.2 Line Status ........................................................................................................................................... 33
8.1.3 Trigger Delay ........................................................................................................................................ 34
8.2 Output Port Function ................................................................................................................ 34
8.2.1 Line Source .......................................................................................................................................... 34
8.2.2 User Output .......................................................................................................................................... 37
8.2.3 Line Status ........................................................................................................................................... 37
8.2.4 Output signal duration setting and Pulse width setting.................................................................... 37
8.3 Hardware Reset ......................................................................................................................... 37
9 Camera Functions .............................................................................................. 38
9.1 ROI (Region of Interest) ............................................................................................................ 38
9.1.1 ROI (One Region) ................................................................................................................................. 38
9.1.2 Multi ROI ............................................................................................................................................... 40
9.2 Pixel Format ............................................................................................................................... 42
9.3 Binning ....................................................................................................................................... 42
9.4 Decimation ................................................................................................................................. 43
9.5 Image Flip .................................................................................................................................. 44
9.6 Gain ............................................................................................................................................ 46
9.6.1 Digital Gain ........................................................................................................................................... 46
9.6.2 White Balance Gain (Only available for the color model) ................................................................. 46
9.7 Black Level................................................................................................................................. 47
9.8 ALC (Auto Light Control) .......................................................................................................... 47
9.8.1 ALC Control Method ............................................................................................................................ 47
9.8.2 AGC (Auto Gain Control) ..................................................................................................................... 48

No.13S076-08
4/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
9.8.3 Auto Exposure ..................................................................................................................................... 48
9.8.4 The setting procedure of ALC ............................................................................................................. 48
9.9 White Balance (Only available for the color model) ............................................................... 49
9.9.1 White balance control methods .......................................................................................................... 49
9.9.2 Disable .................................................................................................................................................. 49
9.9.3 Manual (Off) .......................................................................................................................................... 49
9.9.4 Auto White Balance (Continuous) ...................................................................................................... 49
9.9.5 Push to Set White Balance (Once) ...................................................................................................... 50
9.10 Save and load the camera settings .......................................................................................... 51
9.10.1 Saving the Camera Settings ................................................................................................................ 51
9.10.2 Loading Camera Settings .................................................................................................................... 52
9.10.3 Loading Camera Settings when the Camera Power is on ................................................................. 52
9.10.4 Camera Settings Initialization ............................................................................................................. 52
9.11 Pixel Defect Correction ............................................................................................................. 53
9.12 Trigger ........................................................................................................................................ 53
9.12.1 Trigger Signal Process ........................................................................................................................ 53
9.13 Device User ID ........................................................................................................................... 54
9.14 Event Control (Only available with USB3 Vision protocol) .................................................... 54
9.14.1 The way to use Event .......................................................................................................................... 54
9.14.2 Event Function ..................................................................................................................................... 54
9.15 GenICam command list ............................................................................................................ 55
9.15.1 DeviceControl ...................................................................................................................................... 55
9.15.2 ImageFormatControl............................................................................................................................ 56
9.15.3 AcquisitionControl .............................................................................................................................. 57
9.15.4 TransportLayerControl ........................................................................................................................ 58
9.15.5 DigitalIOControl ................................................................................................................................... 58
9.15.6 EventControl ........................................................................................................................................ 58
9.15.7 EventExposureEndData ...................................................................................................................... 58
9.15.8 EventExposureStartData ..................................................................................................................... 58
9.15.9 EventTestData ...................................................................................................................................... 59
9.15.10 AnalogControl ................................................................................................................................. 59
9.15.11 LUTControl ...................................................................................................................................... 59
9.15.12 UserSetControl ................................................................................................................................ 59
9.15.13 TestControl ...................................................................................................................................... 60
10 Revision History ................................................................................................. 61

No.13S076-08
5/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Precautions for safe use
Please read carefully this “Precautions for safe use” before use the camera. Then the camera uses correctly with
agreeing with below notes.
In this “Precautions for safe use”, notes divides into “Warning” and “Caution” to use the camera safety and prevent to
harm and damage.
Warning This shows, assumption for possibility of serious accident leading death or
serious injury if ignore this note and camera uses incorrectly.
Caution This shows, assumption for possibility of bear the damage or physical
damage if ignore this note and camera uses incorrectly.
About Graphic
symbols This symbol shows general prohibition.
This symbol shows completion or instruction.
[Environment / condition]
Warning
Do not use flammable or explosiveness
atmospheres.
This will cause of personal injury or fire.
Do not use for “safety for human body” related
usage.
This camera is designed for use “do not harm
human body immediately” if by any chance the
camera has malfunction.
Caution
Use and store under specified environmental
conditions (Vibration, shock, temperature,
humidity) in the specifications for this camera.
This will cause of fire or damage the camera.
[Installation and cable wiring]
Warning
Do not use with out of power voltage range
that is specified in the specifications for this
camera.
This will cause of fire, electrification or
malfunction.
Do not wrong wiring.
This will cause of fire or malfunction.

No.13S076-08
6/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Caution
Do not grounding DC power (+) of all devices
that are connect to the camera.
The camera housing is connecting to 0 V line of
camera inside circuit.
There is a risk of short circuit between camera
inside ciurcuit and frame ground.
This will cause of malfunction.
It is necessary to wiring and mounting that is
specified in the specifications for this camera.
This will cause of fire or malfunction.
It is necessary to wiring with turn off the camera.
This will cause of electrification or malfunction.
It is necessary to mounting the camera without
stress for the cable.
This will case of electrification or fire.
[Usage instruction]
Warning
Do not touch the terminal and PCB board
While turn on the camera.
This will cause of electrification or accident
caused by malfunction.
Do not put combustibles near the camera.
This will cause of fire.
Do not use without usage that is specified in
the specifications for this camera.
This will cause of personal injury or malfunction.
Do not push metals including screw driver into
radiation holes.
This will cause of electrification or malfunction.
Do not touch the camera housing while or
afterusing the camera.
There is a risk of get burned.
Caution
Do not push contamination into opening of
the camera.
This will cause of electrification or malfunction.
Do not block the radiation holes.
This will cause of fire due to increase the
camera inside temperature.
[Maintenance]
Caution
Do not disassemble or repair the camera.
This will cause of fire, electrification or
malfunction.
It is turn off the camera when maintaining or
inspecting the camera.
This will cause of electrification.

No.13S076-08
7/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
[Disposal]
Caution
It is necessary to dispose as industrial waste.
]

No.13S076-08
8/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
1 Product Precautions
 Do not give shock to the camera.
 Do not haul or damage the camera cable.
 Do not wrap the camera with any material while using the camera. This will cause the internal camera
temperature to increase.
 When the camera moving or using the place that temperature difference is extreme, countermeasure for
dew condensation (heat removal / cold removal) is necessary.
 While the camera is not using, keep the lens cap on the camera to prevent dust or contamination from getting
in the sensor or filter and scratching or damaging it.
Do not keep the camera under the following conditions.
・ In wet, moist, high humidity or dusty place
・ Under direct sunlight
・ In extreme high or low temperature place
・ Near an object that releases a strong magnetic or electric filed
・ Place with strong vibrations
 Apply the power that satisfies the specified in specifications for the camera.
 The defective pixels may appear due to the sensor characteristics.
 Use below recommend materials (or equivalent materials) to clean the surface of glass.
・ Air dust: Non Freon air duster (NAKABAYASHI Co., LTD.)
・ Alcohol: Propan-2-ol (SAN’EI KAKO Co., LTD.)
・ Non-woven: nikowipe clean room (NKB)
 Use a soft cloth to clean the camera.
2 Warranty
■Warranty period
One year after delivery (However, the camera had malfunction with camera uses correctly)
In below case for a fee even within warranty period.
・The malfunction caused by incorrect usage, incorrect modify or repair.
・The malfunction caused by external shock including the camera dropping after delivery the camera.
・The malfunction caused by fire, earthquake, flood disaster, thunderbolt struck, other natural disaster or
wrong voltage.
■Warranty coverage
Exchange or repair the malfunction camera if the malfunction is occurred by our responsibility.
“Warranty” mean is warranty for the delivered camera itself. Please accept the induction damage by the
camera malfunction is not included.

No.13S076-08
9/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
3 Overview
This document describes the specification of the following cameras.
STC-MBCM200U3V / MCCM200U3V / MBCM200U3V-NIR
STC-MBCM401U3V / MCCM401U3V / MBCM401U3V-NIR
3.1 Features
・USB3 Vision
・Frame Rate (Full Scan): 167 fps @ 2M 8bits, 89 fps @ 4M 8bits
・CMOS (Global Shutter)
・Up to 64 Pixel Defect Correction
・8bits, 10bits, 12bits output
3.2 Product Number Naming Method
STC-MxCM200U3V-x
200: 2M Pixel, 2/3” Sensor
401: 4M Pixel, 1” Sensor
C: Color
B: Monochrome
Sensor Manufacturer
CM: CMOSIS
U3V: USB3 Vision
NIR: Near IR Sensor

No.13S076-08
10/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
4 Specifications
4.1 Electronic Specifications
Model Number STC-MBCM200U3V STC-MCCM200U3V
Image Sensor 2/3” 2M Progressive Monochrome CMOS
(CMOSIS: CMV2000)
2/3” 2M Progressive Color CMOS
(CMOSIS: CMV2000)
Shutter Type Global
Active Picture Elements 2,048 (H) x 1,088 (V)
Cell Size 5.5 (H) x 5.5 (V) µm
Sync System External trigger (Hardware, Software) / Free run
Maximum 8bits output 167 fps
Frame Rate 10bits output 84 fps
(at Full scanning) 12bits output 70 fps
ADC bit width 10bits / 12bits
Video Format 8bits / 10bits / 12bits output
(Support packed on 10bits / 12bits)
Noise Level 8bits output Less than 3 digits (Gain 0 dB)
10bits output Less than 12 digits (Gain 0 dB)
12bits output Less than 48 digits (Gain 0 dB)
Sensitivity (*1) 283 Lux 517 Lux
Exposure time 8bits output 22 µseconds to 16.77 seconds (Default: 5,956.0 µseconds)
10bits output
12bits output
Gain Analog Gain N/A
Digital Gain 0 to 13.9 dB (Default: 0 dB)
Black Level 8bits output 0 to 15 digits
10bits output 0 to 63 digits
12bits output 0 to 255 digits
White Balance Gain N/A 0 (Black level) to x4 (Default: x1)
ROI Horizontal: 32 to 2,048 pixels / Vertical: 32 to 1,088 lines (Default: 2,048 x 1,088)
Adjustable Steps for size: 16 pixels in horizontal direction / 4 lines in vertical direction
Adjustable Steps for offset: 2 pixels in horizontal direction / 2 lines in vertical direction
Multi ROIs (*2) 8 regions (Default: 1 region)
Gamma N/A
HDR Support
Binning (*3) Individual x2, x4 Horizontal, x 2,
x4 Vertical Binning / Off
(Does not increase frame rate)
N/A
Decimation (*3) Individual x2, x4 Horizontal,
x2, x4 Vertical Decimation / Off
(Horizontal decimation does not increase frame
rate)
x2, x4 Vertical Decimation / Off
Image Flip Horizontal / Vertical / Horizontal and Vertical / Off
Defective Pixel Correction Up to 64 points
Default: Bold

No.13S076-08
11/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Model Number STC-MBCM200U3V STC-MCCM200U3V
Auto Image
Control
Auto Exposure Support Support
Auto Gain Support Support
Auto White Balance N/A Support
Operational Mode (*4) Edge preset Trigger / Pulse width Trigger / Start Stop Trigger / Free run
User Setting Storage Support
Communication Through USB3.0 bus
Interface USB3.0 Super speed (USB3.0 micro B)
Protocol USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant
and Sentech’s original protocol (on Standard SDK, Trigger SDK)
Input / Output Three GPIOs, One Camera Hardware Reset
Power Input Voltage +5V (typ.) (This conforms to USB standard)
Consumption (*5) Less than 4.0 W
Default: Bold

No.13S076-08
12/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Model Number STC-MBCM401U3V STC-MCCM401U3V
Image Sensor 1” 4M Progressive Monochrome CMOS
(CMOSIS: CMV4000)
1” 4M Progressive Color CMOS
(CMOSIS: CMV4000)
Shutter Type Global
Active Picture Elements 2,048 (H) x 2,048 (V)
Cell Size 5.5 (H) x 5.5 (V) µm
Sync System External trigger (Hardware, Software) / Free run
Maximum 8bits output 89 fps
Frame Rate 10bits output 45 fps
(at Full scanning) 12bits output 37 fps
ADC bit width 10bits / 12bits
Video Format 8bits / 10bits / 12bits output
(Support packed on 10bits / 12bits)
Noise Level 8bits output Less than 3 digits (Gain 0 dB)
10bits output Less than 12 digits (Gain 0 dB)
12bits output Less than 48 digits (Gain 0 dB)
Sensitivity (*1) 283 Lux 517 Lux
Exposure time 8bits output 22 µseconds to 16.777 seconds (Default: 11,116.0 µseconds)
10bits output
12bits output
Gain Analog Gain N/A
Digital Gain 0 to 13.9 dB (Default: 0 dB)
Black Level 8bits output 0 to 15 digits
10bits output 0 to 63 digits
12bits output 0 to 255 digits
White Balance Gain N/A 0 (Black level) to x4 (Default: x1)
ROI Horizontal: 32 to 2,048 pixels / Vertical: 32 to 2,048 lines (Default: 2,048 x 2,048)
Adjustable Steps for image size: 16 pixels in horizontal direction / 4 lines in vertical direction
Adjustable Steps for offset: 2 pixels in horizontal direction / 2 lines in vertical direction
Multi ROIs (*2) 8 regions (Default: 1 region)
Gamma N/A
HDR Support
Binning (*3) Individual x2, x4 Horizontal, x 2,
x4 Vertical Binning / Off
(Does not increase frame rate)
N/A
Decimation (*3) Individual x2, x4 Horizontal,
x2, x4 Vertical Decimation / Off
(Horizontal decimation does not increase
frame rate)
x2, x4 Vertical Decimation / Off
Image Flip Horizontal / Vertical / Horizontal and Vertical / Off
Defective Pixel Correction Up to 64 points
Auto Image
Control
Auto Exposure Support Support
Auto Gain Support Support
Auto White Balance N/A Support
Default: Bold

No.13S076-08
13/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Model Number STC-MBCM401U3V STC-MCCM401U3V
Operational Mode (*4) Edge preset Trigger / Pulse width Trigger / Start Stop Trigger / Free run
User Setting Storage Support
Communication Through USB3.0 bus
Interface USB3.0 Super speed (USB3.0 micro B)
Protocol USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant
and Sentech’s original protocol (on Standard SDK, Trigger SDK)
Input / Output Three GPIOs, One Camera Hardware Reset
Power Input Voltage +5V (typ.) (This conforms to USB standard)
Consumption (*5) Less than 4.0 W
Default: Bold

No.13S076-08
14/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Model Number STC-MBCM200U3V-NIR STC-MBCM401U3V-NIR
Image Sensor 2/3” 2M Progressive Near Infrared CMOS
(CMOSIS: CMV2000)
2/3” 2M Progressive Near Infrared CMOS
(CMOSIS: CMV4000)
Shutter Type Global
Active Picture Elements 2,048 (H) x 1,088 (V) 2,048 (H) x 2,048 (V)
Cell Size 5.5 (H) x 5.5 (V) µm
Sync System External trigger (Hardware, Software) / Free run
Maximum 8bits output 167 fps 89 fps
Frame Rate 10bits output 84 fps 45 fps
(at Full scanning) 12bits output 70 fps 37 fps
ADC bit width 10bits / 12bits
Video Format 8bits / 10bits / 12bits output
(Support packed on 10bits / 12bits)
Noise Level 8bits output Less than 3 digits (Gain 0 dB)
10bits output Less than 12 digits (Gain 0 dB)
12bits output Less than 48 digits (Gain 0 dB)
Sensitivity (*1) 210 Lux
Exposure time 8bits output 22 µseconds to 16.77 seconds 22 µseconds to 16.777 seconds
10bits output (Default: 5,956.0 µseconds) (Default: 11,116.0 µseconds)
12bits output
Gain Analog Gain N/A
Digital Gain 0 to 13.9 dB (Default: 0 dB)
Black Level 8bits output 0 to 15 digits
10bits output 0 to 63 digits
12bits output 0 to 255 digits
White Balance Gain N/A N/A
ROI Horizontal: 32 to 2,048 pixels /
Vertical: 32 to 1,088 lines
(Default: 2,048 x 1,088)
Horizontal: 32 to 2,048 pixels /
Vertical: 32 to 2,048 lines
(Default: 2,048 x 2,048)
Adjustable Steps for size: 16 pixels in horizontal direction / 4 lines in vertical direction
Adjustable Steps for offset: 2 pixels in horizontal direction / 2 lines in vertical direction
Multi ROIs (*2) 8 regions (Default: 1 region)
Gamma N/A
HDR Support
Binning (*3) Individual x2, x4 Horizontal, x 2, x4 Vertical Binning / Off
(Does not increase frame rate)
Decimation (*3) Individual x2, x4 Horizontal, x2, x4 Vertical Decimation / Off
(Horizontal decimation does not increase frame rate)
Image Flip Horizontal / Vertical / Horizontal and Vertical / Off
Defective Pixel Correction Up to 64 points
Auto Image
Control
Auto Exposure Support
Auto Gain Support
Auto White Balance N/A
Default: Bold

No.13S076-08
15/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Model Number STC-MBCM200U3V-NIR STC-MBCM401U3V-NIR
Operational Mode Edge preset Trigger / Pulse width Trigger / Start Stop Trigger / Free run
User Setting Storage Support
Communication Through USB3.0 bus
Interface USB3.0 Super speed (USB3.0 micro B)
Protocol USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant
and Sentech’s original protocol (on Standard SDK, Trigger SDK)
Input / Output Three GPIOs, One Camera Hardware Reset
Power Input Voltage +5V (typ.) (This conforms to USB standard)
Consumption (*3) Less than 4.0 W
Default: Bold

No.13S076-08
16/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Precautions
(*1) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
(*2) The multiple ROI regions cannot set on the same horizontal line.
(*3) The binning and decimation function cannot use simultaneously.
(*4) Do not input the trigger signal that faster than maximum frame rate frequency.
The ReadOut is interrupted, If the exposure is finished during ReadOut from sensor by the input trigger signal.
(*5) The camera operates as USB3.0 standard even the camera connecting to a USB 2.0 port. Please careful
about the power consumption of the camera when the camera connecting to USB2.0 port.
The guideline to perform the full frame rate with full resolution of camera
The data transfer speed on the USB bus is depending on the performance of USB host controller.
The data transfer speed on the USB bus is very important to obtain full frame rate with full resolution. (167 fps @
2M, 89 fps @ 4M)
Renesas / Fresco Logic host controller improved the data transfer speed drastically in the second generation.
However, the transferring speed of Intel chipset is 10 to 20% faster than these host controllers.
When using USB3.0 interface PCI Express board, please insert it to the PCI Express Gen2.0 (5.0[GT/s]) slot. If
non-PCI Express Gen2.0 (5.0[GT/s]) is used, data transfer speed could decrease by about 50%.
If the frame rate is slow due to the performance of USB host controller, the frame rate of camera should adjust
based on the performance of USB host controller. This may resolve to increase the frame rate.
PC resources may have consumed during the image processing (color interpolation, image display, etc.) with huge
image data from camera.
Camera Setting Environment
Parameter Setting Parameter Setting
Gain Up 0 dB Light Source Light Box (White)
AGC Off Color temperature 5,100K
White Balance Optimum Lens
Electrical Shutter 1/30 seconds F on Lens F5.6
Black Level Optimum Target Luminance IM-600 (Topcon)
Gamma Factory Setting

No.13S076-08
17/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
4.2 Spectral Sensitivity Characteristics

No.13S076-08
18/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
Spectrum Transmittance (Reference)
Near IR Model
Normal Model (Mono)
Transmittance
(%)
Wave Length (nm)

No.13S076-08
19/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
4.1 Mechanical Specifications
Model Number STC-MBCM200U3V /
STC-MBCM200U3V-NIR
STC-MCCM200U3V
Dimensions 28 (W) x 28 (H) x 40 (D) mm (*1)
Optical Filter No Optical Cut Filter IR Cut Filter
Optical Center Accuracy Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Material Aluminum alloy (AC)
Lens Mount (*2) C Mount
Interface Connectors USB Connector: USB3.0 micro B type
I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Camera Mounting M2 screw holes (Three on top, bottom and both side plate)
M4 screws holes (Two on top, four on bottom plate)
Weight Approximately 52 g
(*1) Excluding connectors
(*2) Recommend lens: More than F2.8 (Close side)
Model Number STC-MBCM401U3V /
STC-MBCM401U3V-NR
STC-MCCM401U3V
Dimensions 28 (W) x 28 (H) x 40 (D) mm (*1)
Optical Filter No Optical Cut Filter IR Cut Filter
Optical Center Accuracy Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Material Aluminum alloy (AC)
Lens Mount (*2) C Mount
Interface Connectors USB Connector: USB3.0 micro B type
I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Camera Mounting M2 screw holes (Three on top, bottom and both side plate)
M4 screws holes (Two on top, four on bottom plate)
Weight Approximately 52 g
(*1) Excluding connectors
(*2) Recommend lens: More than F2.8 (Close side)

No.13S076-08
20/62
STC-MBCM200U3V / STC-MCCM200U3V / STC-MBCM200U3V-NIR
STC-MBCM401U3V / STC-MCCM401U3V / STC-MBCM401U3V-NIR Product Specifications and Use’s Guide
4.2 Environmental Specifications
Model Number STC-MBCM200U3V /
STC-MBCM200U3V-NIR
STC-MCCM200U3V
Operational
Temperature /
Humidity
Minimum Environmental Temperature: 0 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Maximum Camera housing temperature (top plate) shall not exceed 55 deg. C (*1),
Storage Temperature / Humidity Environmental Temperature: -30 to +65 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each
Shock Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS Compliant
Model Number STC-MBCM401U3V /
STC-MBCM401U3V-NIR
STC-MCCM401U3V
Operational
Temperature /
Humidity
Minimum Environmental Temperature: 0 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Maximum Camera housing temperature (top plate) shall not exceed 55 deg. C (*1)
Storage Temperature / Humidity Environmental Temperature: -30 to +65 deg. C,
Environmental Humidity: 0 to 85 %RH (No condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each
Shock Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS Compliant
(*1) Please insure the camera is installed with the appropriate heat dissipation. If camera has a mounted lens and a tripod
with an aluminum plate, this could decrease the camera housing temperature for heat dissipation. When the internal
temperature sensor on the camera shows less than 63 deg. C, the camera housing temperature (top plate) will be less
than 55 deg. C.
Taking these steps will maintain the heat rating of the electronic components of the camera.
Upper side of camera
Measuring point