Omron Cimr-v7az - User manual

329Varispeed V7

CIMR-V7AZ

Varispeed V7

Sensorless vector in pocket size

• Nominal torque at 0.5 Hz

• Autotuning

• High carrier up to 14 khz

• Stop accuracy function.

• Integrated PID controller and bidirectional PID-out put

• Motor protection with PTC input

• Pulse input

• Standard digital operator with copy function

• Fieldbus: Modbus, DeviceNet, PROFIBUS, CANopen

• High speed motion bus: ML- II

• Plug-in PLC option unit. Total inverter access.

• CE, UL, and cUL marked

V7 IP65

• Compact size

• Easy wiring

• Built-in filter (Class B)

Customized software*

• The inverter software can be customized to meet

specific application. Examples:

• Traverse sofware S-9381.

*For detailed information please refer to case software section.

Ratings

• 200 V Class single-phase 0.1 to 4 kW

• 200 V Class three-phase 0.1 to 7.5 kW

• 400 V Class three-phase 0.2 to 7.5 kW

System configuration

*See note *See note

* Option frames are needed for V7 IP65 type.

Communication unit

3G3IV-PCN329-E

Inverter to PC cable

3G3IV-PCN126/326

Digital operator

extension cable

CX-Drive

Braking accessories

PLC option unit

Varispeed

Line filter

3G3IV-PEZZ8122_

DIN attachment

JVOP-144

Remote digital oper.

with potentiometer

JVOP-146

Remote digital oper.

with potentiometer

LKEB_ ERF150WJ_

CDBR_B

* V7 IP65 types are built-in filter inverters.

*See note

Y203-EN2-02-Katalog.book Seite 329 Mittwoch, 24. Mai 2006 2:22 14

330 Frequency inverters

Type designation

200 V class

400 V class

Specifications

IP20 single-phase: CIMR-V7AZ B0P1 B0P2 B0P4 B0P7 B1P5 B2P2 B4P0

IP65 single-phase: CIMR-V7TZ --- --- B0P405 B0P705 B1P505 B2P205 ---

IP20 three-phase: CIMR-V7AZ 20P1 20P2 20P4 20P7 21P5 22P2 24P0

Maximum permissible motor output kW1

1. Based on a standard 4-pole motor for maximum applicable motor output. Select the inverter model within the allowable motor rated current

0.12 0.25 0.55 1.1 1.5 2.2 4.0

Output

characteristics

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7

Rated output current A 0.8 1.6 3.0 5.0 8.0 11.0 17.5

Max. output voltage Proportional to input voltage: 0..240 V

Max. output frequency 400 Hz

Power

supply

Rated input voltage

and frequency

Single-phase 200..240 V 50/60 Hz

3-phase 200..230 V 50/60 Hz

Allowable voltage

fluctuation -15%..+10%

Allowable frequency

fluctuation +5%

IP20 three-phase: CIMR-V7AZ 40P2 40P4 40P7 41P5 42P2 43P0 44P0 45P5 47P5

IP65 three-phase: CIMR-V7TZ 40P405 40P705 41P505 42P205 43P005 44P005

Maximum permissible motor output kW1

1. Based on a standard 4-pole motor for maximum applicable motor output. Select the inverter model within the allowable motor rated current

0.37 0.55 1.1 1.5 2.2 3.0 4.0 5.5 7.5

Output

characteristics

Inverter capacity kVA 0.9 1.4 2.6 3.7 4.2 5.5 7.0 11.0 14.0

Rated output current A 1.2 1.8 3.4 4.8 5.5 7.2 9.2 14.8 18.0

Max. output voltage Proportional to input voltage: 0..400 V

Max. output frequency 400 Hz

Power

supply

Rated input voltage

and frequency 3-phase 380..460 VAC, 50/60 Hz

Allowable voltage

fluctuation -15%..+10%

Allowable frequency

fluctuation +5%

Voltage

B: Single-phase 200 VAC

2: Three-phase 200 VAC

4: Three-phase 400 VAC

Z: European standard specifications

Inverter

V7 series

A: With digital operator (with potentiometer)

T: V7 IP65 type with digital operator

( without potentiometer )

CIMR—V7AZB0P10

Max. applicable motor output

0P1: 0.1 kW

7P5: 7.5 kW

"P" indicates a decimal

point

[ ]

Protective enclosure:

0: IP20

1: NEMA1

05: IP65

Y203-EN2-02-Katalog.book Seite 330 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 331

Commom specifications

Model number

CIMR-V7AZ-@

CIMR-V7TZ-@

Specifications

Control functions

Control methods Sine wave PWM (V/f control, sensorless vector control)

Output frequency range 0.1..400 Hz

Frequency tolerance Digital set value: ±0.01% (-10..+50 ºC)

Analogue set value: ±0.5% (25 ±10 ºC)

Resolution of frequency set value Digital set value: 0.01 Hz (<100 Hz), 0.1 Hz (>100 Hz)

Analogue set value: 1/1000 of maximum frequency

Resolution of output frequency 0.01 Hz

Overload capability 150%/60 s

Frequency set value 0..10 V (20 kΩ), 4..20 mA (250 Ω), 0..20 mA (250 Ω)

Pulse train input, frequency setting value (selectable)

Braking torque

(short term peak torque)

Up to 200 W 150% or more

550 W to 1.1 kW 100% or more

1.5 kW 50% or more

>1.5 kW 20% or more

Continuous braking torque approx. 20% without, 150% with external braking resistor

Functionality

Binary inputs 7 freely programmable inputs

Binary outputs 1 relay output, 2 freely programmable open collector outputs

Analogue output 1 programmable analogue output (0..10 V)/pulse output

Analogue inputs 2 analogue inputs, 0..10 V, 4..20 mA, 0..20 mA

Braking/acceleration times 0.01..6000 s

Display Optionally frequency, current or set value

Error and status LED

Protection functions

Motor overload protection Electronic thermal overload relay

Instantaneous overcurrent Motor coasts to a stop at approx. 250% of inverter rated current

Overload Motor coasts to a stop after 1 minute at 150% of inverter rated output current

Overvoltage Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class)

Undervoltage Stops when DC bus voltage is approx. 200 V or less (double for 400 V class)

(approx. 160 V or less for single-phase series)

Momentary power loss Following items are selectable: not provided (stop if power loss is 15 ms or longer), continuous operation

if power loss is approx. 0.5 s or shorter, continuous operation

Cooling fin overheat Protected by electronic circuit

Stall prevention level Individual levels during accel/constant speed. Decel ON/OFF available. During decel enable/disable selectable.

Cooling fan fault Detected by electronic circuit (fan lock detection)

Ground fault Protected by electronic circuit (operation level is approx. 250% of rated output current)

Power charge indication RUN lamp stays ON or digital operator LED stays ON until the DC bus voltage becomes 50 V or less.

(Charge LED is provided for 400 V)

Ambient conditions

Degree of protection IP20, NEMA1, IP65

Cooling Self cooling for 200 V 0.1..0.4 kW (3 or single phase) and for 400 V 0.2..0.75 kW

Cooling fan for 200 V 0.75 to 7.5 kW and for 400 V 1.5 to 7.5 kW

Ambient temperature Open air mounting: -10 ºC..50 ºC

Wall mounting: -10 ºC..40 ºC

Ambient humidity 95% (without condensation)

Storage temperature -20 ºC..+60 ºC (short-term temperature during transportation)

Installation Indoor (no corrosive gas, dust, etc.)

Installation height Max. 1000 m

Vibration 10 to 20 Hz, 9.8 m/s2max; 20 to 50 Hz, 2 m/s2max

Y203-EN2-02-Katalog.book Seite 331 Mittwoch, 24. Mai 2006 2:22 14

332 Frequency inverters

Digital operator

Indicators

(setting/monitor

item indicators)

Data display

FREQUENCY

adjuster

Operation keys

Appearance Name Function

Data display Displays relevant data items, such as frequency reference, output frequency,

and parameter set values.

Frequency adjuster Sets the frequency reference within a range between 0 Hz and the maximum frequency. 1

Frequency reference indicator The frequency reference can be monitored or set while this indicator is lit.

Output frequency indicator The output frequency of the inverter can be monitored while this indicator is lit.

Output current indicator The output current of the inverter can be monitored while this indicator is lit.

Multi-function monitor indicator The values set in U01 through U10 are monitored while this indicator is lit.

Forward/reverse selection indicator The direction of rotation can be selected while this indicator is lit when operating the inverter

with the RUN key.

Local/remote selection indicator The operation of the inverter through the digital operator or according to the set parameters is

selectable while this indicator is lit. 2

Parameter setting indicator The parameters in n001 through n179 can be set or monitored while this indicator is lit. 3

Mode key Switches the simplified-LED (setting and monitor) item indicators in sequence.

Parameter being set will be canceled if this key is pressed before entering the setting.

Increment key Increases multi-function monitor numbers, parameter numbers, and parameter set values.

Decrement key Decreases multi-function monitor numbers, parameter numbers, and parameter set values.

Enter key Enters multi-function monitor numbers, parameter numbers, and internal data values after they

are set or changed.

RUN key Starts the inverter running when the 3G3MV is in operation with the digital operator

STOP/RESET key Stops the inverter unless parameter n007 is set to disable the STOP key.

Used to reset the inverter when an error occurs. 4

1. V7 IP65 types have digital operator without frequency adjuster.

2. The status of the local/remote selection indicator can be only monitored while the inverter is in operation. Any RUN comand input is ignored while this

indicator is lit.

3. While inverter is in operation, the parameters can be only monitored and only some parameters can be changed. Any RUN command is ignored while the

parameter setting indicator is lit.

4. For safety reasons, the reset function cannot be used while an operation instruction (forward/reverse) is being input. Turn the operation instruction OFF

before using this function.

Y203-EN2-02-Katalog.book Seite 332 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 333

IP 20 type 0.1 to 4 Kw

IP20 / NEMA1 type 5.5/7.5 Kw

Dimensions

Voltage class Max. applicable

motor output kW Inverter model

CIMR V7AZ Figure Dimensions in mm Weight kg Cooling

method

W H D W1 H1 H2 D1

Three-phase

200 V

0.12 20P1

168

128

118

10 0.6

Self cooled0.25 20P2 0.6

0.55 20P4 108 42 0.9

1.1 20P7 128 62 1.1

Fan cooled

1.5 21P5

2108 131 96 564 1.4

2.2 22P2 140 1.5

4.0 24P0 140 143 128 71 2.1

Single-phase

200 V

0.12 B0P1

168

128

56 118 5 10 0.6

Self cooled0.25 B0P2 76 0.7

0.55 B0P4 131 42 1.0

1.1 B0P7

108 140 96

118 5

64 1.5

Fan cooled

1.5 B1P5 156 96 1.5

2.2 B2P2 140 163 128 71 2.2

4.0 B4P0 170 180 158 2.9

Three-phase

400 V

0.37 40P2

108

128

118 5

16 1.0

Self cooled0.55 40P4 110 34 1.1

1.1 40P7 140

1.5

1.5 41P5 156 1.5

Fan cooled

2.2 42P2 1.5

3.0 43P0 140 143 128 71 2.1

4.0 44P0 2.1

Voltage class Max. applicable

motor output kW Inverter model

CIMR - V7AZ Figure Dimensions in mm (inches) Weight kg Cooling

method

W H D W1 H1 H2 D1

Three-phase

200 V

5.5 25P5

180 260 170 164 244 8 65 4.6

Fan cooled

7.5 27P5 4.8

Three-phase

400 V

5.5 45P5 180 260 170 164 244 8 65 4.8

7.5 47P5 4.8

W 1 D

8.5

(0.34)

H 2 H 1

2 M4

W 1

H 2 H 1

4 M4

8.5

(0.34) D1

Figure 1 Figure 2

Figure 3

Y203-EN2-02-Katalog.book Seite 333 Mittwoch, 24. Mai 2006 2:22 14

334 Frequency inverters

IIP65 type 0.55 to 4 Kw

Voltage

class

Max.

applicable

motor

output kW

Inverter

model

CIMR V7TZ Figure

Dimensions in mm Weight

kg Cooling

method

W H D W1 W2 H1 H2 H3 D1

Single-phase

200 V

0.55 B0P405

280 240 142 260 228 165 38 275 44

3.4 Self cooled

1.1 B0P705 4.3

Fan cooled1.5 B1P505 3.7

2.2 B2P205 4.2

Three-phase

400 V

0.55 40P405

280 240 142 260 228 165 38 275 44

4.2 Self cooled

1.1 40P705 4.3

Fan cooled

1.5 41P505 3.7

2.2 42P205 3.7

3.0 43P005 4.1

4.0 44P005 4.1

W 1

H 2

H 1

Figure 4

W 2

H 1

6 . 4

3x PG25

Y203-EN2-02-Katalog.book Seite 334 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 335

IP65 type 0.55 to 4Kw (with option frame accessory attached)

Voltage

class

Max.

applicable

motor

output kW

Inverter

model

CIMR V7TZ Figure

Dimensions in mm Weight

kg Cooling

method

W H D W1 W2 H1 H2 H3 D1 D2

Single-

phase 200 V

0.55 B0P405

280 240 180 260 228 165 38 275 44 38

3.6 Self cooled

1.1 B0P705 4.5

Fan cooled1.5 B1P505 3.9

2.2 B2P205 4.4

Three-phase

400 V

0.55 40P405

280 240 180 260 228 165 38 275 44 38

4.4 Self cooled

1.1 40P705 4.5

Fan cooled

1.5 41P505 3.9

2.2 42P205 3.9

3.0 43P005 4.3

4.0 44P005 4.3

Figure 5

W 2

H 1

W 1

6 . 4

H 2

H 1

3x PG25

2x PG12

Y203-EN2-02-Katalog.book Seite 335 Mittwoch, 24. Mai 2006 2:22 14

336 Frequency inverters

Filters *

* V7 IP65 types are built-in filter inverters.

Schaffner model Dimensions

A B C D E F G H I J K L

3x200 V 3G3MV-PFI2010-SE 194 82 50 160 181 62 5.3 M5 25 56 118 M4

3G3MV-PFI2020-SE 169 111 50 135 156 91 5.5 M5 25 96 118 M4

3G3MV-PFI2030-SE 174 144 50 135 161 120 5.3 M5 25 128 118 M4

1x200 V 3G3MV-PFI1010-SE 169 71 45 135 156 51 5.3 M5 22 56 118 M4

3G3MV-PFI1020-SE 169 111 50 135 156 91 5.3 M5 25 96 118 M4

3G3MV-PFI1030-SE 174 144 50 135 161 120 5.3 M5 25 128 118 M4

3G3MV-PFI1040-SE 174 144 50 135 161 150 5 M5 25 158 118 M4

3x400 V 3G3MV-PFI3005-SE 169 111 45 135 156 91 5.3 M5 22 96 118 M4

3G3MV-PFI3010-SE 169 111 45 135 156 91 5.3 M5 22 96 118 M4

3G3MV-PFI3020-SE 174 144 50 135 161 120 5 M5 25 128 118 M4

3G3MV-PFI3030-SE 304 184 56 264 288 150 6 M5 28 164 244 M5

Rasmi model Dimensions

W H L X Y Inverter fixing

3x200 V 3G3MV-PFI2010-E 82 50 194 181 62 M5

3G3MV-PF2020-E 111 50 169 156 91 M5

3G3MV-PFI2030-E 144 50 174 161 120 M5

3G3MV-PFI2050-E 184 56 304 288 150 M5

1x200 V 3G3MV-PFI1010-E 71 45 169 156 51 M5

3G3MV-PFI1020-E 111 50 169 156 91 M5

3G3MV-PFI1030-E 144 50 174 161 120 M5

3G3MV-PFI1040-E 174 50 174 161 150 M5

3x400 V 3G3MV-PFI3005-E 111 50 169 156 91 M5

3G3MV-PFI3010-E 111 50 169 156 91 M5

3G3MV-PFI3020-E 144 50 174 161 120 M5

3G3MV-PFI3030-E 184 56 304 288 150 M5

Drive mounts

Output

flexes

Y203-EN2-02-Katalog.book Seite 336 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 337

DIN rail mounting bracket

Inverter DIN rail mounting bracket

3-phase 200 VAC CIMR-V7AZ - 20P1/ 20P4/ 20P7 3G3IV-PEZZ08122A

CIMR-V7AZ - 21P5/ 22P2 3G3IV-PEZZ08122B

CIMR-V7AZ - 24P0 3G3IV-PEZZ08122C

Single-phase 200 VAC CIMR-V7AZ - B0P1/ B0P2/ B0P4 3G3IV-PEZZ08122A

CIMR-V7AZ - B0P7/ B1P5 3G3IV-PEZZ08122B

CIMR-V7AZ - B2P2 3G3IV-PEZZ08122C

CIMR-V7AZ - B4P0 3G3IV-PEZZ08122D

3-phase 400 VAC CIMR-V7AZ - 40P2/ 40P4/ 40P7/ 41P5/ 42P2 3G3IV-PEZZ08122B

CIMR-V7AZ - 44P0 3G3IV-PEZZ08122C

3G3IV-PZZ08122A 3G3IV-PZZ08122B

(35.1)

DIN rail

Four, M4 tap Four, M4 tap

3G3IV-PZZ08122C 3G3IV-PZZ08122D

Side view

(common to

all the units)

Y203-EN2-02-Katalog.book Seite 337 Mittwoch, 24. Mai 2006 2:22 14

338 Frequency inverters

Attachments

Heatsink external mounting attachment

When mounting an external cooling-fan to the V7AZ, this attachment is required.

CIMR-V7AZ Attachment

order code

Dimensions in mm

D1 D2 D3

V7AZ-20P1

V7AZ-20P2 EZZ08136A 69.2 12 30

V7AZ-20P4 EZZ08136B 69.2 42 50

V7AZ-20P7 EZZ08136C 69.2 62 70

V7AZ-21P5 EZZ08136D 73 58 70

V7AZ-22P2 98 58 70

V7AZ-24P0 -EZZ08136F 78.6 64.4 70

V7AZ-25P5

V7AZ-27P5 EZZ08136H 113.8 56.2 60

V7AZ-B0P1

V7AZ-B0P2 EZZ08136A 69.2 12 30

V7AZ-B0P4 EZZ08136B 92.2 42 50

V7AZ-B0P7 EZZ08136D 82 58 70

V7AZ-B1P5 98 58 70

V7AZ-B2P2 EZZ08136F 98.6 64.4 70

V7AZ-B4P0 EZZ08136G 115.6 64.4 70

V7AZ-40P2 EZZ08136E 82 13.2 30

V7AZ-40P4

EZZ08136D

82 28 40

V7AZ-40P7 82 58 70

V7AZ-41P5

V7AZ-42P2 98 58 70

V7AZ-43P0

V7AZ-44P0 EZZ08136F 78.6 64.4 70

V7AZ-45P5

V7AZ-47P5 EZZ08136H 113.8 56.2 60

Y203-EN2-02-Katalog.book Seite 338 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 339

Braking resistor unit ERF-150WJ

Braking resistors unit

Note: Prepare mounting screws

(2-M4x8 tapped screws).

Screws 8mm or more and general

metric screws cannot be used.

Voltage Model LKEB-#Dimensions in mm Approx.

weight kg

A B C D MTG.screw

200 V

class

20P7 105 275 50 260 M5x3 3.0

21P5 130 350 75 335 M5x4 4.5

22P2 130 350 75 335 M5x4 4.5

40P7 130 350 75 350 M5x4 5.0

25P5 250 350 200 335 M6x4 7.5

27P5 350 350 200 335 M6x4 8.5

400 V

class

40P7 105 275 50 260 M5x3 3.0)

41P5 130 350 75) 335 M5x4 4.5

42P2 130 350 75) 335 M5x4 4.5

43P0 130 350 75 335 M5x4 5.0

43P7

45P5 250 350 200 335 M6x4 7.5

47P5 350 350 200 335 M6x4 8.5

MTG screw

30 or more 30 or more

150

150 or more 150 or more

Y203-EN2-02-Katalog.book Seite 339 Mittwoch, 24. Mai 2006 2:22 14

340 Frequency inverters

Standard connections

Installation

DC reactor (option)

Short bar

Thermal

overload

relay (option)

Braking resistor

(option)

MCCB

Forward run/stop

Reverse run/stop

External fault

(no contact)

Fault reset

JOG command

Multi-step speed

reference 1

Multi-

function

input

Multi-step speed

reference 2

Frequency

reference

Pulse train input

Frequency setter

MEMOBUS

communication

RS-485/422

max 19.2kBPS

R+

R–

S+

S–

Terminal

resistance

(1/2 W. 120

)

Frequency meter

adjusting potentiometer

Multi-function

analog input 2*

Housing (type : ZHR-3)

Analog monitor

output

0 TO +10 VDC (2 mA)

Pulse monitor

output

(12 VDC

20 mA max. 30

70% duty)

Output

frequency

PFM

Digital operator

frequency setting

potentiometer

min

max

VIN

IIN

GND

+2 +1 – B1 B2

U/T1

V/T2

W/T3

R/L1

S/L2

T/L3

SC PNP

NPN

Shield connection

terminal

Speed reference

pulse train

(33 kHz max.)

Frequency setting

power supply

(+12 V 20 mA)

Speed frequency

reference

0 to +10 V (20 kΩ) OR

4 to 20 mA (250 Ω)

0 V

Multi-function

photocoupler output

+48 VDC 50 mA or less

Running

Speed

agree

Grounding

Fault

Multi-function

output

250 VAC 1 A or less

30 VDC 1 A or less

: twisted pair shielded wire: shielded wire P

2* A housing is required when using the CN2 terminal on the back side of the digital operator.

1m analog input cable (code no. 3G3MV-PCN-CN2) is available for housing on request

A +24 V power supply is required for sequence connection by PNP transistor (+24 V common) .

Shows the following two kinds of connections (factory setting) :

· Input signals (S1 to S7) are non-voltage contacts

· Sequence connection by NPN transistor (0V common)

PHC

24 V

CN2

0 to 10 V

4 to 20 mA

Line

filter

1* V7 IP65 types are built-in filter.

Y203-EN2-02-Katalog.book Seite 340 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 341

Main circuit

Control Circuit

Terminal Name Function (signal level)

R/L1, S/L2, T/L3 AC power supply input Main circuit power supply input (use R/L1 and S/L2 for single-phase power supply inverter.

Do not use T/L3 of the models less than 0.75 kW for other usage, such as a junction terminal.)

U/T1, V/T2, W/T3 Inverter output For inverter output

B1, B2 Braking resistor connection For braking resistor connection

+2, +1 DC reactor connection Remove the short bar between +2 and +1 when connecting DC reactor (option)

+1, – DC power supply input For power supply input (+1: positive electrode; – : negative electrode)*

Grounding For grounding (grounding should conform to the local grounding code.)

Type No. Signal name Function Signal level

Digital input signals

S1 Multi-function input selection 1 Factory setting: runs when CLOSED, stops when OPEN.

24VDC, 8mA

photocoupler

insulation

S2 Multi-function input selection 2 Factory setting: runs when CLOSED, stops when OPEN.

S3 Multi-function input selection 3 Factory setting: "fault reset"

S4 Multi-function input selection 4 Factory setting: "external fault (NO contact)"

S5 Multi-function input selection 5 Factory setting: "multi-step speed reference 1"

S6 Multi-function input selection 6 Factory setting: "multi-step speed reference 2"

S7 Multi-function input selection 7 Factory setting: "JOG command"

SC Multi-function input selection

Common Common for control signal

Analog input signals

RP Speed reference pulse train input 33 kHz max.

FS Power supply terminal for

frequency setting +12V (allowable current: 20 mA max.)

FR Speed frequency reference 0 to +10 VDC (20 kΩ) or 4 to 20 mA (250 Ω), 0 to 20 mA (250 Ω) (resolution 1/1000)

FC Frequency reference common 0 V

1 (CN2) Multi-function analog voltage input Voltage input (between terminals 1 and 3): 0 to 10 VDC (input impedance: 20 kΩ)

Current input (between terminals 2 and 3): 4 to 20 mA (input impedance: 250 Ω)

2 (CN2) Multi-function analog current input

3 (CN2 Multi-function analog input common

Digital output signals

MA NO contact output

Factory setting: "fault"

Contact capacity

250 VAC,

1 A or less

30 VDC, 1 A

or less

NC Contact output

MC Contact output common

P1 Photocoupler output 1 Factory setting: "running" Photocoupler output:

+48 VDC, 50 mA or

less

P2 Photocoupler output 2 Factory setting: "at frequency"

PC Photocoupler output common 0 V

Analog

output

signals

AM Analog monitor output Factory setting: "output frequency" 0 to +10 V output

(pulse monitor output available by setting constants. Duty: 30 to 70%) 0 to 10 V 2 mA

or less

Resolution: 8 bits

AC Analog monitor common 0 V

RS-485/422

R+ Communication input (+)

For MEMOBUS communication

operation by RS-485 or RS-422 communication is available.

RS-485/422

MEMOBUS

protocol

19.2 kBPS max.

R– Communication input (–)

S+ Communication output (+)

S– Communication output (–)

Y203-EN2-02-Katalog.book Seite 341 Mittwoch, 24. Mai 2006 2:22 14

342 Frequency inverters

Inverter heat loss

Three-phase 200 V class

Single-phase 200 V class

Three-phase 400 V class

Installation conditions for IP65

Model CIMR-V7AZ 20P1 20P2 20P4 20P7 21P5 22P2 24P0 25P5 27P5

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7 9.5 13

Rated current A 0.8 1.6 3 5 8 11 17.5 25 33

Heat

loss W

Fin 3.7 7.7 15.8 28.4 53.7 60.4 96.7 170.4 219.2

Inside unit 9.3 10.3 12.3 16.7 19.1 34.4 52.4 79.4 98.9

Total heat loss 13.0 18.0 28.1 45.1 72.8 94.8 149.1 249.8 318.1

Model CIMR-V7AZ B0P1 B0P2 B0P4 B0P7 B1P5 B2P2 B4P0

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7

Rated current A 0.8 1.6 3 5 8 11 17.5

Heat

loss W

Fin 3.7 7.7 15.8 28.4 53.7 64.5 98.2

Inside unit 10.4 12.3 16.1 23.0 29.1 49.1 78.2

Total heat loss 14.1 20.0 31.9 51.4 82.8 113.6 176.4

Model CIMR-V7AZ 40P2 40P4 40P7 41P5 42P2 44P0 45P5 47P5

Inverter capacity kVA 1.4 2.6 3.7 4.2 5.5 7.0 11 14

Rated current A 1.8 3.4 4.8 5.5 7.2 8.6 14.8 18

Heat

loss W

Fin 15.1 30.3 45.8 50.5 58.2 73.4 168.8 209.6

Inside unit 15.0 24.6 29.9 32.5 37.6 44.5 87.7 99.3

Total heat loss 30.1 54.9 75.7 83.0 95.8 117.9 256.5 308.9

Inverter Inverter Inverter

50 mm min. (5.5 and 7.5 KW)

30 mm min. (0.1 to 4.0 KW) 100 mm min.

100 mm min.

Side

Air

Install the inverter vertically in order to ensure proper cooling. When installing the inverter,

always provide the following minimum installation space to allow normal heat dissipation.

1. Always provide enough space for the main circuit or control lines including cable gland.

2. If installing inverters next to one another, provide a minimum spacing of 60mm.

50 mm or more

50 mm or more 120 mm or more

120 mm or more

40 mm or more 40 mm

or more

Side spaces Top and bottom spaces

Air

Y203-EN2-02-Katalog.book Seite 342 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 343

Connections for braking resistor

Connections for braking resistor unit

AC reactor

200 V class 400 V class

Max. applicable

motor output kW Current value

AInductance

mH Max. applicable

motor output kW Current value

AInductance

0.12 2.0 2.0 ------

0.25 2.0 2.0 0.2 1.3 18.0

0.55 2.5 4.2 0.4

1.1 5 2.1 0.75 2.5 8.4

1.5 10 1.1 1.5 5 4.2

2.2 15 0.71 2.2 7.5 3.6

4.0 20 0.53 4.0 10 2.2

5.5 30 0.35 5.5 15 1.42

7.5 40 0.265 7.5 20 1.06

Braking

resistor

Motor

3-phase

power

supply

Overload relay

trip contact

Braking

resistor

unit

Use sequencer to break

power supply side on

overload relay trip contact

Faulr contact

Power

supply

3-phase

Braking resistor unit

overheat contact

AC reactor

Motor

Be sure to connect

AC reactor on inverter

input side [L

(R),

(S), L

(T)].

Y203-EN2-02-Katalog.book Seite 343 Mittwoch, 24. Mai 2006 2:22 14

344 Frequency inverters

DC reactor

200 V class 400 V class

Max. applicable

motor output kW Current value

AInductance

mH Max. applicable

motor output kW Current value

AInductance

0.12

5.4 8

--------

0.25 0.2

3.2 280.55 0.4

1.1 0.75

1.5

18 3

1.5 5.7 11

2.2 2.2

4.0 4.0 12 6.3

5.5 36 1 5.5 23 3.6

7.5 7.5

DC reactor

Motor

Y203-EN2-02-Katalog.book Seite 344 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 345

Ordering information

Varispeed V7

200 V 400 V

*See note *See note

* Option frames are needed for V7 IP65 type.

DDDDDD

Communication unit

3G3IV-PCN329-E

Inverter to PC cable

3G3IV-PCN126/326

Digital operator

extension cable

CX-Drive

Braking accessories

PLC option unit

Varispeed

Line filter

3G3IV-PEZZ8122_

DIN attachment

JVOP-144

Remote digital oper.

with potentiometer

JVOP-146

Remote digital oper.

with potentiometer

LKEB_ ERF150WJ_

CDBR_B

* V7 IP65 types are built-in filter inverters.

*See note

Specifications Model

1x200 V 0.12 Kw 0.8 A CIMR-V7AZB0P10

0.25 Kw 1.6 A CIMR-V7AZB0P20

0.55 Kw 3.0 A CIMR-V7AZB0P40

1.1 Kw 5.0 A CIMR-V7AZB0P70

1.5 Kw 8.0 A CIMR-V7AZB1P50

2.2 Kw 11.0 A CIMR-V7AZB2P20

4.0 Kw 17.5 A CIMR-V7AZB4P00

3x200 V 0.12 Kw 0.8 A CIMR-V7AZ20P10

0.25 Kw 1.6 A CIMR-V7AZ20P20

0.55 Kw 3.0 A CIMR-V7AZ20P40

1.1 Kw 5.0 A CIMR-V7AZ20P70

1.5 Kw 8.0 A CIMR-V7AZ21P50

2.2 Kw 11.0 A CIMR-V7AZ22P20

4.0 Kw 17.5 A CIMR-V7AZ24P00

5.5 Kw 25.0 A CIMR-V7AZ25P51

7.5 Kw 33.0 A CIMR-V7AZ27P51

Specifications Model

3x400 V 0.37 Kw 1.2 A CIMR-V7AZ40P20

0.55 Kw 1.8 A CIMR-V7AZ40P40

1.1 Kw 3.4 A CIMR-V7AZ40P70

1.5 Kw 4.8 A CIMR-V7AZ41P50

2.2 Kw 5.5 A CIMR-V7AZ42P20

3.0 Kw 7.2 A CIMR-V7AZ43P00

4.0 Kw 9.2 A CIMR-V7AZ44P00

5.5 Kw 14.8 A CIMR-V7AZ45P51

7.5 Kw 18.0 A CIMR-V7AZ47P51

Y203-EN2-02-Katalog.book Seite 345 Mittwoch, 24. Mai 2006 2:22 14

346 Frequency inverters

Varispeed V7 IP65

200 V 400 V

ALine filters *

* V7 IP65 types are built-in filter inverters.

Specifications Model

1x200 V 0.55 Kw 3.0 A CIMR-V7TZB0P405

1.1 Kw 5.0 A CIMR-V7TZB0P705

1.5 Kw 8.0 A CIMR-V7TZB1P505

2.2 Kw 11.0 A CIMR-V7TZB2P205

Specifications Model

3x400 V 0.55 Kw 1.8 A CIMR-V7TZ40P405

1.1 Kw 3.4 A CIMR-V7TZ40P705

1.5 Kw 4.8 A CIMR-V7TZ41P505

2.2 Kw 5.5 A CIMR-V7TZ42P205

3.0 Kw 7.2 A CIMR-V7TZ43P005

4.0 Kw 9.2 A CIMR-V7TZ44P005

Inverter Line filter

Voltage Model CIMR-V7AZ Schaffner Rasmi Rated current (A) Weight (kg)

3-Phase 200 VAC

20P1 / 20P2 / 20P4 / 20P7 3G3MV-PFI2010-SE 3G3MV-PFI2010-E 10 0.8

21P5 / 22P2 3G3MV-PFI2020-SE 3G3MV-PFI2020-E 20 1.0

24P0 3G3MV-PFI2030-SE 3G3MV-PFI2030-E 30 1.1

25P5 / 27P5 -3G3MV-PFI2050-E 50 2.3

Single-Phase 200 VAC

B0P1 / B0P2 / B0P4 3G3MV-PFI1010-SE 3G3MV-PFI1010-E 10 0.6

B0P7 / B1P5 3G3MV-PFI1020-SE 3G3MV-PFI1020-E 20 1.0

B2P2 3G3MV-PFI1030-SE 3G3MV-PFI1030-E 30 1.1

B4P0 3G3MV-PFI1040-SE 3G3MV-PFI1040-E 40 1.2

3-Phase 400 VAC

40P2 / 40P4 3G3MV-PFI3005-SE 3G3MV-PFI3005-E 5 1.0

40P7 / 41P5 / 42P2 3G3MV-PFI3010-SE 3G3MV-PFI3010-E 10 1.0

43P0 / 44P0 3G3MV-PFI3020-SE 3G3MV-PFI3020-E 15 1.1

45P5 / 47P5 3G3MV-PFI3030-SE 3G3MV-PFI3030-E 30 2.3

Y203-EN2-02-Katalog.book Seite 346 Mittwoch, 24. Mai 2006 2:22 14

Varispeed V7 347

B Communication cards

C PLC option card

D Option frame accessory for V7 IP65

Type Model 1

1. Option frame accessory is needed for V7 IP65 types when communications option units are used.

Description Function

Communication option board

3G3MV-PDRT2

DeviceNet option card 2

2. For V7 IP65 types with DeviceNet communication, SI-N1/V7 should be used.