OMUARK OMFOCUS Smart Delivery Box Uark User manual

USER MANUAL
UARK Series Smart delivery box
USER MANUAL
Smart Delivery Box Uark & Uark Mini

Thanks for Choosing our products.
For more information, please visit our official website
www.omuark.com www.omconnect.com
OMFOCUS TECH is committed to the design, production and marketing of smart safety products.
The new brand OMUARK symbolizes yoUrArk, which will escort your smart and safe life.
All our smart box products will be under this brand.
UArk
UArk Mini
P1

What’s Included
P2Hello Card ×1
Mechanical Key × 2
Positioning Tool × 1
Foot × 4
Ground-Mount Screw × 4 Wall-Mount Screw × 4
(Uark Mini Only)
Screwdriver × 2
Reset Tool × 1
Assembling Screw × 22
Hexagon Screwdriver × 1

Specification
Model
Unlock Mechanism
Battery
Material
P3






Uark & Uark Mini
Galvanized Steel
4 × 18650 Lithium Rechargeable Battery
Bluetooth, PIN Code, App, Mechanical Key
UARK UARK MINI

Lock&Unlock
Emergency
Battery
Mobile Control
UVC Sterilization
Administrator Unlock
.......
User Unlock
This Delivery Box allows to add up to 30 Pickup
Passwords for your family and friends.
Bluetooth Unlock Remote Sharing
Mobile Administrator
With your Mobile app you could unlock the Safe by
swiping the to the right.
You could generate offline code through mobile App and
let your friends and family retrieve the packages from
Delivery Box easily.
Set Administrator PIN Codes from your Mobile to
unlock, add users, delete users, etc.
Battery Life
The battery lifetime will be 12 months for operating.
Please use good batteries above 3000mAh.
Low Battery
When the battery runs out of power, system
will remind you to replace the batteries.
When the power is down, we can use
Mechanical Key to open the Delivery Box.
Emergency Unlocked
Set a Master Administrator PIN for Unlocking,
settings, operations etc. and only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong PINs for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
BLE broadcasting turns to sleep mode if no
operation. Easy mail and letter delivery with standard
mail slot on the right.
Letter Delivery
Features P4
15 minutes UVC Sterilization only after the Delivery Box unlock by Delivery Code.
Independent power supply by one set of 2 × 18650 Lithium Rechargeable Battery.
You can turn on or turn off the UVC Sterilization by ’’UVC Switch’’ on Top case.

Installation
P5
> 1. Delivery Box U ARK/ U ARK Mini can be mounted on the ground with 4 ground-mount screws.
> 2. Delivery Box U ARK Mini can be mounted on the wall with 4 wall-mount screws.
Quick Start
Step 1>Install Battery
> 1. Put 4 ×18650 Lithium Rechargeable Battery into the battery dock on the Top case.
One set for Keypad operation, another set for UVC light.

P6
Key in password to deliver Touch to get voice prompt
> 1. Scan QR Code below and download the App and turn on your mobile Bluetooth. You can also choose to download
other App supported by Tuya.
Bluetooth broadcasting & re-connecting:
฀Tap any key to activate the Bluetooth, App&Device will get reconnected each other.
฀Bluetooth will turn to sleep mode and lights out if no operation within 1 minute.
Activate Bluetooth to enter pairing mode
Step 3>Add Device
> 1. Tap + 9 + + admin code + #, when you see the light slowly blinks in blue then the Delivery Box is ready to pair.
**
Step 2>Download Mobile App

P7
> 2. Go to App Home page, click ”Add Device” or click “+” on the upper right.

P8
>3. You will see the detected device and click “Go to add”.

P9
>4. Connecting, you need to wait for a few seconds to let it finish
>5. Device added

P10
>1. Tap + 0 + and wait for 2 quick beeps
>2. Right after the 2 beeps please key in:
Initial Admin code 123456 + #+new admin code+ #+new admin code again +#, when
you hear a long beep with green light, the new admin password has been set.
Administrator is required to reset the admin code before adding other user codes.
Step 4>Change Admin Password-Initial Admin Password:123456

P11
Mechanical Instructions
Password & Factory Mode:
฀Password must be 6 digits (no more or less)
1. Password Length
฀Long press and hold for 5 slow beeps
2. Initialization
>. After 2 quick beeps and the blue light blinks slowly, Tap admin code + #
>. When the button blinks in green, the initialization has been finished.
7. Reset Factory Mode
฀Use the reset tool press and hold the reset button for 5 seconds until a long beep.
3. Add Delivery Password
4. Delete Delivery Password
฀Tap +1+ until the blue light blinks
>. Enter admin password +
#
>. Enter new delivery password +
#
>. Enter new delivery password again and tap #
>. When the button blinks in green, delivery password has been set.
6. System Lockdown
฀Delivery box will Lockdown for 5 minutes if entering wrong passwords continuously 5 times.
฀Tap + 2 + until the blue light blinks
>. Enter admin password +
#
>. Enter the delivery password you wish to delete and tap #
>. Enter new delivery password again and tap #
>. When the button blinks in green the password has been deleted.
5. Delete All Delivery Passwords
฀Tap + 00000 + until the blue light blinks
>. Enter admin password and tap
#
>. When the button blinks in green all passwords have been deleted.
* *
* *
* *
*
User can add the last 6 digits of phone number or one set of 6 digits Pin Code as Delivery Password.
Please note that the Delivery Password should be indicated in the package delivery information.

P12 App Instructions
฀You will see all devices on the home page.
฀Tap the Smart Delivery Box to start operating.
฀Swipe the to the right to unlock.
How to unlock:

P13
฀Tap “Temporary Code”
฀Tap “OK” to confirm and also can Tap “Share” to share this code with family or friend.
฀Tap “Obtain Password” to get Dynamic code which is valid for 5 minutes.
How to get Temporary code:

P14 
฀Tap “Member Management” to add family member or others.
฀Tap “+” to add member and edit member’s information and save.
฀Member will receive an invitation on the App, after he/she accept it, Admin can find the member in the list.
How to add Members:

P15
฀Tap the Admin “Me” to add Permanent code.
฀Tap “Add” to enter the Permanent code you want or get Random Permanent code and save.
฀You are able to use the Permanent code to unlock the Delivery box.
How to add Permanent code:

P16
฀Tap the Member you want to manage.
฀Tap “Add” to set the Permanent code for the Member and save.
฀Tap ”Effective Time” to set this Member is Permanent or Custom and save.
How to manage Members:
฀Set the validity period of Custom Member(Year/Month/Day/Hour/Minute).
฀Members don’t have access to Admin.

P17
฀You will find out when and whom opened the delivery box.
฀Tap to check the Log.
How to check Opening Log:

P18
฀Select the language you want and confirm.
฀Tap “Settings” and go to “Lock Language“
How to Switch the Language of Voice Prompt:

P19
How to Reset the Delivery box without Admin code:
>1. If you forget the Admin code, you are still able to reset the box by Reset button.
>2. The Reset button is on the back of the lock body.
>3. Please use Reset Tool press and hold the Reset button for 5 seconds unit a long beep.
>4. After a long beep, the delivery box has been initialized. Admin code is back to 123456 #.
>5. It is necessary to change the Admin code before adding other user codes.
Reset Tool
Reset button