One Forall URC-8550 User manual

Retain For Future Reference
Topline
TM
USER GUIDE & CODE BOOK
Home Theater
Universal Remote Control
URC-8550

BASIC FUNCTIONS
ABOUT YOUR Topline 8… 3
INSTALLING THE BATTERIES… 4
FEATURES AND FUNCTIONS… 6
LANGUAGE SELECTION… 8
SETTING THE CLOCK… 9
SETTING UP YOUR DEVICES…
Setting Up Your TV…
10
Setting Up Your Other Devices… 11
Searching For Your Code 13
Recording Your Codes... 14
REASSIGNING THE DEVICE KEYS… 15
THE SCAN KEY… 16
TELETEXT & FASTEXT… 16
ADVANCED FUNCTIONS
HOME THEATER…
Setting up the Home Theater Key…
17
SEQUENCES…
Home Theater Power Sequence…
19
Installing Other Sequences… 20
Deleting a Sequence… 20
TIMED SEQUENCES… 21
Recording When Your Not Home… 21
Deleting a Timed Sequence… 22
THE SHIFT KEY…
Shifted Functions
22
Sleeptimer… 23
VOLUME LOCK... 25
CHANNEL +/- SIMULATION... 26
CLEAR ALL... 27
TROUBLE SHOOTING... 28
CUSTOMER SERVICE…
Product Support…
29
Key Magic… 30
Telephone Upgrade… 30
SET-UP CODES
Televisions 31
Video Recorders 34
Satellite Receivers 35
Cable Converters 37
Video Accessories 37
CD Players, Mini Disc Players 37
Phonographs 38
Miscellaneous Audio 38
Home Automation 38
Audio Amplifiers 38
Tuners 38
Audio Cassette Players 38
Laser Disc Players 39
Digital Audio Tape 39
Table of Contents
2

Thank you for purchasing the ONE FOR ALL Topline 8 Home Theater
Universal Remote Control. Your Topline 8 package contains:
• Your Topline 8 remote control
• Your Topline 8 manual
Your User Guide & Codebook is divided into three parts: Basic Functions,
Advanced Functions and Set-Up Codes. You may need this guide again in the
future, so please be sure to keep it.
Your Topline 8 needs four new AAA/LRO3 batteries.
Your ONE FOR ALL Topline 8 is designed to let you use one remote to
operate your Video and Audio equipment; any device designed to be
operated by an infrared signal. This also includes those devices which
operate over 100 kHz. You can choose any combination of 8 devices you
would like to operate. Also, what makes the Topline 8 even more unique is
it allows you to control your home theater system with the touch of a key
by using the Topline 8’s Home Theater mode key. The following pages
explain in simple steps how to customize the Topline 8 your home
entertainment environment.
3
About your Topline 8

Your Topline 8 requires four (4) new alkaline AAA/LRO3 batteries. To install
the batteries:
Remove the battery cover by pressing down on the
bottom portion and sliding the cover off.
Match the batteries to the + and - marks inside the
battery case, then insert the batteries.
Slide the battery cover back into place.
Once the batteries are inserted all the segments in the display screen will
show. If the display screen is blank or if the screen reads [BATTERY LO], the
batteries are running low and you must replace them with fresh batteries to
ensure proper functioning. The Topline 8’s internal back-up batteries ensure
that programming information is not lost if the batteries are changed;
however, you will need to reset the clock upon changing batteries
Installing the Batteries
4
2
3
1

`Device
Keys
TV/VCR
Power
Home
Theater Key
Volume
Scan
Picture-in-
Picture
Previous
Program
Normalize
Channel
Menu/Surround
Sound Keys
Stop
Pause
Slow
Play Fast Forward
Record
Rewind
Number
Keys
Magic
ESC
Lite
Enter
Shift
Mute
LCD
Teletext
Fastext
Basic Features
5

6
FEATURES AND FUNCTIONS
Key Function
The LCD screen guides you through setting up and
operating your home entertainment equipment.
Device Keys
The TV, VCR, SAT, AMP, TUN, CD, AUX1 and AUX2 keys
select the device to be controlled. For example, pressing
the TV key allows the remote to control the functions of
your Television, after pressing VCR you can operate your
Video, etc. For more detailed information, please see page
10.
Home Theater Key
This key is used to select the Home Theater mode of the
Topline 8. See page 17 for more information.
Power
The Power key controls the same function it did on your
original remote. When SHIFT is pressed first, this key is
also used to access the Sleeptimer of your device (see page
22).
Menu/Surround Sound Keys
If available on your orginal remote, these directional keys
are used to access the menu function, programming
guides or the surround sound of your device.
During set-up and programming your Topline 8, the up
and down keys are used to scroll through the LCD
screens.
Magic
The MAGIC key is used to set up your Topline 8 and to
access the menu and special features.
Esc
The Esc (Escape) key is used to exit the LCD screen and go
back to normal operation.
Lite
The LITE key is used to turn On and Off the Topline 8’s
backlit keypad and LCD. Press the LITE key once to turn on
the backlight feature. The backlight will stay on for
approximately ten seconds each time a key is pressed. To
deactivate the backlight, press the LITE key again.
Enter
The Enter Key is used to make selections on the LCD
menu. It is also used to make selections in your on-screen
programming menus.
Shift
The Shift key accesses advanced features which are
located under the following keys: POWER, NORM, PP, PIP,
VOL+/-, CH+/-, MENU+/-, left, right. This key can also be
used for programming advanced functions on the Topline
8keypad.
Basic Features

7
Key Function
Volume +/-, Channel +/-, Mute
These keys operate just as those on your original remote
control. When SHIFT is pressed first, volume and channel
can be used to control color and brightness (see page 22).
Number Keys
The Number keys (0-9, 10, 20) provide functions just like
your original remote, such as direct access programme
selection. If your original remote uses one/two digit input
switching (-/-- symbol), this function can be obtained by
pressing the -/-- key, which is the same as the 10 key.
If your original remote used an AV key, this can be found
by pressing the 20 key.
Scan
The Scan key allows you to easily browse through the
programmes on your TV, VCR or Satellite. See page 16 for
more details.
PIP
If available on your original remote, the PIP key will access
the Picture-in-Picture feature of your TV, VCR and SAT.
PP (Previous Programme)
Operates the same as the Previous Programme key on
your original remote (can also be called Last Channel or
Recall).
Normalize
If available on your original remote, the Normalize key
returns all settings of your television to their standard levels.
Audio, Video
These keys can be used for programming sequences. See
page 19 for more details.
Video Recorder Keys
After pressing VCR, these keys operate the functions of
your VCR. To prevent accidental recording, the Record key
must pressed twice to start recording.
Teletext/Fastext Keys
After pressing the TV key, the top row of VCR keys are
used to operate the main Teletext functions of your
Television. The symbols below the top row of keys are for
Teletext. Of course, your Television must be Teletext
capable. For an explanation of the teletext symbols, please
refer to page 16.
After pressing the TV key, the bottom row of VCR keys
marked red, green, yellow and blue allow you to access
the Fastext functions of your television. Again, your
television must be fastext capable to operate these
functions. For a more detailed explanation of how
Teletext and Fastext work, please refer to the manual of
your Televison.
Also, some devices require you to use the fastext keys to
operate menu control. If so, these keys will function the
same way as on your orginal remote.
Basic Functions
(red)
(green)
(yellow)
(blue)
-/--
AV

8
LANGUAGE SELECTION
It is possible to choose between three languages for the text which is
displayed on the LCD of the Topline 8. You can chose between English,
French and German. The default setting is English. To change the language
selection, follow the procedure below.
Press and hold the MAGIC key until the display screen
changes from [DEVICE and the TIME] to [TIMED SEQ].
Press MENU- twice, the display will change to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
Press MENU+ two times and the display will read
[LANGUAGE]. Press ENTER.
The display will read [ENGLISH]. Use the Menu- key to
cycle through the language choices. When you get to the
desired language, press ENTER. The display will return to
the main screen.
Basic Functions
Notes:
- If you make a mistake in your selection, press ESC and repeat the
procedure starting with step number 1.
- When you replace the batteries, the language you have selected will stay
programmed.
1
2
4
3

9
SETTING THE CLOCK
The Topline 8 comes with both a 24hr clock and a 12hr clock. After installing the
batteries for the first time, the Topline 8 will default to the 24hr clock setting. To
set the clock, follow the procedure below. It is also possible during this
procedure to change to a 12hr clock setting, if desired.
Press and hold the MAGIC key until the display screen
changes from [DEVICE and the TIME] to [TIMED SEQ].
Press MENU- twice, the display will change to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
Press MENU- one time and the display will read [TIME
SETUP]. Press ENTER.
The display will read [24HR CLOCK]. If this is the setting
you want, press ENTER, OR if you wish to change to a
12hr clock, press MENU- and the display will read [12HR
CLOCK]. Then press ENTER.
The display will change to [TIME] and the first digit in the
clock will blink. Enter the first digit of the time, then the
next digit will blink. Continue entering the time until all
four digits of the clock have been set.
If you are using a 24hr clock, press ENTER. If you are using
a 12hr clock, the AM/PM will blink. Press MENU- to toggle
between AM and PM. Once this is selected, press ENTER.
The display will then change to the day of the week. Use
the MENU- key to cycle through the days until the proper
day is displayed on the screen, then press ENTER. The
display will return to the main screen [DEVICE and the
TIME] showing the selections you have made.
Basic Functions
Notes:
- If you make a mistake in your selection, press ESC, and repeat the
procedure starting with step number 1.
- When you replace the batteries, you will need to set the clock again.
1
2
3
4or
()
5
6
7
or
()

10
SETTING UP YOUR TV
To set up the Topline 8 for your television:
Find your Television code in the Set-Up Code section
(starting on page 31). Codes are listed by brand name. The
most popular code is listed first. Make sure your Television
is switched on; any programme is fine.
Press the TV key, then press and hold the MAGIC key
until the display screen changes from [TV and the TIME] to
[TIMED SEQ].
Press MENU- once, the display will change to [CODE
SETUP]. Press ENTER and the display will change to [DEV
SET UP].
Press ENTER and the display will change to [TV].
Enter your three-digit TV code using the number keys,
then press ENTER.
Aim the Topline 8 at your TV and press POWER. Your
Television should turn off. If your TV turns off, press the
ESC key to return to the main screen [TV and the TIME].
If your TV does not turn off, enter the next code in the
list then press ENTER. Press POWER to see if your TV turns
off. Once your TV turns off, you have found the correct
code. Press the ESC key to return to the main screen [TV
and the TIME].
Write your code in the three boxes on page 14 for easy future reference.
Basic Functions: Setting Up Your Devices
Notes:
- To control your Television, [TV] must be displayed on the screen. This can
be obtained by pressing the TV key.
- To set up more than one device, before pressing the ESC key during step
6, you can press the next device key you want to program and enter the
code for that device.
- If your TV does not respond, try every code listed for your brand during
step 6. If none of the codes listed operate your TV, try the Search Method
described on page 13, even if your brand is not listed at all.
1
2
4
5
3
6

11
SETTING UP YOUR OTHER DEVICES
To set up the Topline 8 for your other devices:
Find the code for your device in the Set-Up Code section
(starting on page 31). Codes are listed by brand name. The
most popular code is listed first. Make sure your device is
turned on.
Press the Device key on the Topline 8 for the device you
wish to control. Devices can be found under the following
key (for example to set up a Cable Converter you would
press SAT):
LCD
Device Abbreviation Key
Television TV
Video Recorder VCR
Satellite Receiver SAT
Cable Converter CABLE
Video Accessories VID AC
CD Player CD
Phonographs PHONO
Audio Amplifier AMP
Tuner TUNER
Miscellaneous Audio MISC AU
Home Automation HOM CT
Amplifier AMP
Tuner TUNER
Audio Cassette Player TAPE
Laser Disc Player LP
Digital Audio Tape DAT
Basic Functions
1
2

12
Then, press and hold the MAGIC key until the display
screen changes to [TIMED SEQ].
Press MENU- once, the display will change to [CODE
SETUP]. Press ENTER and the display will change to [DEV
SET UP].
Press ENTER. Then, if necessary, use the MENU- key to
locate the device you want based on the chart above (for
example, if you are setting up a Cable Converter, you
would need to press MENU- once until CABLE is displayed
on the screen).
Then, enter your three-digit device code using the
number keys, then press ENTER.
Aim the Topline 8 at your device and press POWER. Your
device should turn off. If your device turns off, press the
ESC key to return to the main screen.
If your device does not turn off, enter the next code in
the list then press ENTER. Next, press POWER to see if
your device turns off. Once your device turns off, you have
found the correct code. Press the ESC key to return to the
main screen.
Write the code for your device(s) in the boxes on page 14 for easy future
reference.
Basic Functions
Notes:
- To control your device, press the device key first.
- Only one device (CD, amplifier, cassette, etc.) can be assigned to a device
key. If your original remote operates more than one device (for example,
a receiver, CD player and cassette player in one remote), you will need to
set up each device separately.
- If your device’s original remote control does not have a power key, press
PLAY instead of POWER during step 7. (Make sure a tape or disc is
inserted.)
- To set up more than one device, before pressing the ESC key during step
7, you can press the next device key you want to program and enter the
code for that device.
- If your Device does not respond, try every code listed for your brand
during step 7. If none of the codes listed operate your Device, try the
Search Method described on page 13, even if your brand is not listed at
all.
4
5
6
7
3

13
SEARCHING FOR YOUR CODE
If your device did not respond to the Topline 8 after you have tried all the
codes listed for your brand, try the Search Method described below. The
Search Method may also work if your brand is not listed at all.
For example, to search for the code to operate your TV:
Make sure your TV is switched on, any channel is fine.
Press the TV key, then press and hold the MAGIC key
until the display screen changes from [TV and the TIME] to
[TIMED SEQ].
Press MENU- once, the display will change to [CODE
SETUP]. Press ENTER and the display will change to [DEV
SET UP].
Press MENU- once, the display will change to [DEV
SEARCH]. Press ENTER and the display will change to [TV
and code].
Note: code represents the last 3-digit code which was
entered prior to starting the search. This code will now be
displayed the screen.
Aim the Topline 8 at your TV and press POWER. If your TV
turns off, press ENTER to lock in your code. The display
will then return to the main screen. If your TV does not
turn off, press MENU+. The next available code will be
displayed on the screen. Press POWER again. If your TV
turns off, press ENTER. If your TV does not turn off,
continue pressing MENU+ and POWER until your
Television responds.
Once your TV turns off, press ENTER to lock in your code
and return to the main screen.
Basic Functions
Notes:
- Be patient. You may need to alternate between ENTER and POWER many
times. When you have reached the end of the list, the display will read
(LIST END). Remember you must aim the Topline 8 at your device the
entire time you are searching for your code.
- To search for the code for your other devices, repeat the steps above,
only substitute the appropriate device key in place of “TV” during step 2.
- If you are searching for the code for a VCR, CD Player, Laser Disc Player
or DVD Player, you may want to use PLAY instead of POWER during step
5 (make sure a tape or disc is inserted.).
1
2
4
3
5
6
()
+

RECORDING YOUR CODES
After you have set up the Topline 8 with your devices, you should record
your codes. If you are not sure which code the Topline 8 responded to, you
can display the code on the LCD for each device you have set up.
For example, to display your TV code:
Press the TV key, then press and hold the MAGIC key
until the display screen changes from [TV and the TIME] to
[TIMED SEQ].
Press MENU-once, the display will change to [CODE
SETUP]. Press ENTER and the display will change to [DEV
SET UP].
Press MENU- twice, the display will change to [DEV
NUMBER]. Press ENTER and the display will change to [TV
and your code]. Record your code below.
Once you have recorded your TV code in the space
provided below, continue by pressing the next device key
and record the code below.
Press ESC to return to the main screen.
TV CODE
VCR CODE
SAT/CBL CODE
CD CODE
AMP CODE
TUNER CODE
OTHER
OTHER
14
Basic Functions
■■■■■■
■■■■■■
■■■■■■
■■■■■■
■■■■■■
■■■■■■
■■■■■■
■■■■■■
1
2
3
4
5

REASSIGNING THE DEVICE KEYS
The Topline 8 can operate any combination of eight devices you want (for
example: 2-TVs, 2-VCRs, 1-Satellite, 1-Amplifier, 1-Tuner and 1-CD Player). To
do this, you must reassign the necessary keys.
For example, to place a second TV on the AUX2 key:
Press and hold the MAGIC key until display screen
changes from [DEVICE and the TIME] to [TIMED SEQ].
Press MENU- twice, the display will change to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
Press MENU- three times and the display will read [DEV
CHANGE]. Press ENTER.
The display will read [FROM DEV]. Press the DEVICE KEY
you would like to move. In this example, you would press
TV. The display will read [COPY TO]. Then press the
unused DEVICE KEY you would like to replace. In this
example, you would press AUX2. The display will change
to [TV2 and TIME]. Now your second TV can be
programmed under the AUX2 key.
Continue with setting up this device with the appropriate
3-Digit Code as was described in steps 1-7 on page 11.
To reset a device key back to its orginal function repeat the steps above only
press the same device key twice during step 4.
15
Basic Functions
Notes:
- To reassign any device key, follow the instructions above only substitute
the correct device keys during step 4.
- If you have moved a device key which contains more than one type of
device (ie: SAT key contains Satellite and Cable), you will need to refer to
the chart on page 11 during step 4.
1
2
4
5
3

SCAN
The Scan key on the Topline 8 allows you to go through every programme
available on your TV, Video or Satellite.
For example, to scan through the programmes on your Television:
Aim the Topline at your TV and press TV, then SCAN.
Your TV will begin to scan through all the programmes
available on your Television, stopping at each programme
for about three seconds. Remember, the Topline 8 must
remain aimed at your TV the entire time you are using
Scan.
When you find a programme you would like to watch,
simply press the SCAN key again to stop the Scan feature.
To use Scan with your Video Recorder or Satellite, simply press the
appropriate device key during step 1 (VCR orSAT), then Scan.
TELETEXT AND FASTEXT
The Topline is designed to operate the basic functions of teletext (text on,
text off, mix and hold/stop).
Symbol Title Description
TEXT Puts the television in the teletext mode.
TV Switches the television back to regular
viewing mode. On some televisions, this
may be done by pressing the TEXT key
several times.
MIX Shows both teletext and regular
television simultaneously. Also used for
subtitling. On some televisions, this
function is accessed by pressing the
TEXT key twice.
HOLD/STOP Stops changing pages.
The keys marked red, green, yellow and blue are used to access the fastext
functions of your television.
16
Note: For a more detailed explanation of teletext and fastext, please refer
to the manual of your television. Remember, different televisions control
teletext and fastext features is different ways. Not all teletext functions
may be available for your particular model.
Basic Functions
Note: Scan may not function with devices which do not have programme
+/- keys on the original remote.
1
2

HOME THEATER
The HOME THEATER mode key allows you to bring the most commonly used
functions of your home theater components to one mode key. By doing this
you can configure the keypad to meet your specific home theater needs.
You can define by key grouping, which component should be controlled.
The steps below will guide you through programming the Home Theater
key.
Setting Up the Home Theater Key
For example, to configure the keypad like this:
Example:
Key Grouping: To be controlled by:
Audio (Volume) Keys Tuner
Channel Keys Satellite
Playback (VCR) Keys VCR
PIP Keys TV
Menu/Surround Keys Amplifier
Press and release the HOME THEATER mode key.
Press and hold MAGIC until the display changes from
[THEATER and TIME] to [TIMED SEQ].
Press MENU- two times and the display will read
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL]. Press ENTER.
The display will read [AUDIO] which refers to the volume
and mute keys. Press ENTER. The display will change to
[AMP], or if you have redefined the Amp key, it would
read [TV2], [SAT2] and so on.
At this screen you will press the Device Key you want to
be controlled by the volume keys in the Home Theater
Mode. Following the example above, you would press
TUN. Once you have made your selection, press ENTER.
The display will change to [CHANNEL] which refers to the
number keys and CH+/-. Press ENTER. The display will
change to [TV].
At this screen you will press the Device Key you want to
be controlled by the channels keys in the Home Theater
Mode. Following the example above, you would press SAT.
Once you have made your selection, press ENTER.
17
Advanced Functions
Note: The Home Theater key should only be set up after you have all your
devices working with the Topline 8.
2
3
4
1
5

The display will change to [PLAY BACK] which refers to
the VCR keys. Press ENTER. The display will change to
[VCR].
At this screen you will press the Device Key you want to
be controlled by the VCR keys in the Home Theater Mode.
Following the example above, you would press VCR. Once
you have made your selection, press ENTER.
The display will change to [PIP]. Press ENTER. The display
will change to [TV].
At this screen you will press the Device Key you want to
be controlled by the PIP keys in the Home Theater Mode.
Following the example above, you would press TV. Once
you have made your selection, press ENTER.
The display will change to [MENU] which refers to the
surround sound functions. Press ENTER. The display will
change to [TV].
At this screen you will press the Device Key you want to
be controlled by the Menu/Surround keys in the Home
Theater Mode. Following the example above, you would
press AMP. Once you have made your selection, press
ENTER. The display will return to the main screen.
Now, whenever the Home Theater key is pressed, the keypad will control
the devices you have selected: The volume keys will control your tuner, the
channel keys will control your satellite, etc.
18
Advanced Functions
Notes:
- To change one or more of the Home Theater selections you have made,
repeat the steps above. During step 4, you can press MENU- to locate the
screen you wish to change.
- If you have placed an extended function on one of these keys using “Key
Magic” and then include this key in your Home Theater selection, the
extended function will be selected NOT the original function of this key.
6
7
8

SEQUENCES
POWER SEQUENCE - Turning on your Home
Theater components with one key.
After you have set up the Home Theater key, you can then set up a
Sequence on the Power key which will allow you to turn on all these
components with the touch of a key.
To program the Power Macro:
Press and release the HOME THEATER key, then press and
hold MAGIC until the display screen changes to [TIMED
SEQ].
Press the Menu- key twice until the display changes to
[CONFIGURE]. Press ENTER and the display will change to
[THEATR SEL].
Press the Menu- key four times until the display changes
to [KEY SEQ]. Press ENTER and the display will read [SEL
SEQKEY] (select sequence key).
Press POWER to assign the sequence to this key. The
display will read [ENTER SEQ]. Now enter the sequence for
all the devices you want to turn “ON”. For example:
TUN + POWER + TV + POWER + SAT + POWER + etc.
until you have entered all devices you want to be
included.
While entering the sequence, the display will read [ESC TO
END]. When you have entered the sequence, press ESC to
save. The display will return to [THEATER and the TIME].
To activate the Home Theater Power Sequence, the display
must read [THEATER], then you can just aim the Topline 8
at your devices and press POWER to activate.
19
Advanced Functions
Notes:
- During step 4, it is important to enter the sequence in the order you
want your components to turn on. For example, if you would like your
tuner and amplifier to turn on before your TV, you must enter the
sequence in this order.
- If your original remote requires that you press a number key to turn on
your device, you should do this in place of pressing Power during step 4.
2
x 4
4
5
1
3

INSTALLING OTHER SEQUENCES
You can program the Topline 8 to issue a sequence of commands at the
press of a key. For example, you may want to turn on your Satellite and TV
at the same time then set your TV to programme 5. Any sequence of
commands you regularly use can be reduced to one key stroke for your
convenience. The keys labeled Audio and Video are for installing Sequences.
To set up a Sequence:
PRESS: DISPLAY WILL READ:
1. HOLD MAGIC TIMED SEQ
2. MENU- x 2 CONFIGURE
3. ENTER THEATR SEL
4. MENU- x 4 KEY SEQ
5. ENTER SEL SEQKEY (select sequence key)
6. AUDIO (or VIDEO) ENTER SEQ
7. Enter the sequence of commands in the order you want them to activate.
For the example mentioned above, you would press:
SAT + POWER + TV+ POWER + 5 (enter the channel number exactly as
you would on your original remote). While you are entering the
sequence, the display will read [ESC TO END]. Press ESC to save.
The display will return to the main screen.
Deleting A Sequence
To erase any Sequence from a key, repeat steps 1-6 above, then press ESC to
save.
20
Advanced Functions
Notes:
- Once you program a Sequence on a specific key, the sequence will work
regardless of the mode (TV, VCR, SAT, etc.) you are in.
- If your original remote requires that you press a number key to turn on
your device, you should do this in place of pressing Power.
- If you have placed an extended function on a key using “Key Magic” and
then include this key in a Sequence, the extended function will be
included in the Sequence NOT the original function of this key.
- Besides the Audio and Video key, you can install a Sequence on any key
EXCEPT the following: TV, VCR, SAT, AUX1, AMP, TUN, CD, AUX2, HOME
THEATER, MAGIC, ESC, LITE, ENTER, SHIFT, SCAN.