One Forall URC-9040 User manual

Remote
Fjernbetjening
Fjernkontroll
Fjärrkontroll
Yleiskaukosäädin
∆ËϯÂÈÚÈÛÙ‹ÚÈÔ
Универсальный пульт
дистанционного управления
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 1
Brugsanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .s. 19
Bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 37
Bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 55
Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 73
√‰ËÁ›Â˜ ¯Ú‹Ûˆ˜ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 91
Инструкция пользователя . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 109
English
Dansk
Norsk
Svenska
Suomi
EÏÏËÓÈο
Русский
URC-9040

bWWW.ONEFORALL.COM

WWW.ONEFORALL.COM 1
Table of Contents
English
PICTURE OF URC-9040 PC MEDIA REMOTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
THE KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SETTING UP THE URC-9040
How to set up the URC-9040 to control your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to set up the URC-9040 to control your devices
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SEARCH METHOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CODES
• Television (incl. LCD and plasma TV’s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
•Set-Top-Box (STB and satellite receiver)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
•Cable Converter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
•Video Accessory (especially STB and SAT functions)
. . . . . . . . . . . . . . . . . . . . . . . . . . 139
•Audio (amplifier and amp./tuner and Miscellaneous)
. . . . . . . . . . . . . . . . . . . . . . . . . . 139
QUICK CODE REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
THE LEARNING FEATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
(How to copy functions from your original working
remote onto the URC-9040)
OPERATIONAL RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
EXTRA FEATURES
• Volume Punch-Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• Macros (Sequence of commands within a certain mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Mode-Key-Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Power Macro (Sequence of Power commands) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Code Upgrade technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CUSTOMER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Your URC-9040 Package contains:
•Your URC-9040 PC Media Remote
•Your URC-9040 Manual
•Your URC-9040 RF-Receiver + setup CD
You may need this guide again in the future, so please be sure to keep it.
Your URC-9040 requires 2 new “AAA/LR03”alkaline batteries.
Your URC-9040 can operate four devices:
•TV : Television (incl. TFT / Plasma etc.)
•PC : Personal Computer
•AUDIO : Amplifier or Tuner
•STB : Set-Top-Box or Satellite Receiver or Cable Converter
This also includes those devices, which operate over 100 kHz.
To control your PC just attach the RF-Receiver to your PC (see page 6 for more information).
Also, what makes the URC-9040 even more unique is the „Learning“feature, which allows you to copy
any function of your original remote control onto the keypad of your URC-9040 Remote.
The following pages explain in simple steps how to customise the URC-9040 to your devices.
About Your URC-9040

2WWW.ONEFORALL.COM
1
2
1
7
5
8
11
3
4
6
9
15
10
13
20/21
17
12
14
16
18
19

WWW.ONEFORALL.COM 3
Your URC-9040 requires 2 new “AAA/LR03”alkaline batteries.
1. Remove the battery cover from the back of your URC-9040 by pressing down on the tab.
2. Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3. Press the battery cover back into place.
Important notes:
- Do not use rechargeable batteries.
- Upon changing the batteries, your set-up codes and advanced programming will be retained.
See the picture of your URC-9040 PC Media Remote on page 2.
1. Device Keys
The TV, PC, AUDIO, and STB keys select the home entertainment device to be
controlled. The device keys can also be programmed with a Macro (see page
13). The PC key is a dedicated mode key that cannot be used for any other
device than a PC.
2. LED (red light)
During operation of the URC-9040 the LED will light up to indicate that it is
sending out infrared.
3. POWER
The POWER key operates the same function it did on your original remote
control. The Power key can be programmed with a Power Macro (see page 14)
4. Number Keys (0 –9 and letters, -/- -, AV)
The Number keys (0-9, -/—, AV) provide functions just like your original remote,
such as direct access to channel selection. If your original remote uses one/two
digit input switching (-/—symbol), this function can be obtained by pressing the
-/—key. If your original remote has a 10 key, this function can also be found
under the -/—key. If your original remote has a 20 key, this function can also be
found under the AV key. In AUDIO mode the Number keys may provide source
(input) selection. In PC mode these keys will provide you the letters (A, B…Z).
5. AV key
In TV mode you will obtain the AV / Input function. In AUDIO mode this key
may give an Input/Source function. In DVD mode this key may give a TV/DVD
function.
6. Replay key
Press Replay to command your PVR to instantly replay the last 7 seconds of a
program you are watching.
7. OFA Media Centre key
Use the OFA Media Centre key to switch to PC mode and transmit the OFA
Media Centre command.
Installing the Batteries
The Keypad

4WWW.ONEFORALL.COM
8. Advance key
Press Advance to return to Advance/Quick Skip.
9. Guide
In TV and/or STB mode you will obtain the “Guide”function, if available on
your original remote. In AUDIO mode you will obtain the DSP mode function.
10. MENU Key
The MENU key controls the same function as it did on your original remote.
11. EXIT
In TV and/or STB mode you will obtain the “Menu Exit”function, if available
on your original remote.
12. Info
In TV and/or STB mode you may obtain the ‘Display”, “OSD”or “Info”func-
tion, if available on your original remote.
13. Directional Keys
If available on your original remote, these keys will allow you to navigate
through the menu mode of your device.
14. OK
The OK key will confirm your choice in menu operation and programming
mode.
15. Volume +/- Keys
These keys operate in the same way as the keys on your original remote. If no
volume-function is present on your device, you will obtain the volume of the
device that is programmed on the AUDIO key.
16. Channel +/- Keys
These keys operate in the same way as the keys on your original remote. In PC
mode they will allow you to skip up or down through pages.
17. MUTE Key
The Mute key operates the same function it did on your original remote con-
trol. If no mute-function is present on your device, you will obtain the mute-
function of the device that is programmed on the AUDIO key.
18. LAST Key
This key will provide you the “LAST”(or Recall or Previous Program) function (if
available on your original remote).
The Keypad

WWW.ONEFORALL.COM 5
19. Red, Green Yellow and Blue
After pressing the TV key and accessing the text mode, the keys marked red,
green, yellow and blue, allow you to access the Fastext functions of your
television. If on your original remote control these keys are used for
Menu navigation, the URC-9040 Fastext keys may operate in the same
way. These keys are also available in the STB mode.
20. Transport keys
These keys operate the transport functions (PLAY, FF, REW etc.) of your device.
21. Teletext Keys
After pressing the TV key, the transport keys (REW, PLAY, PAUSE, FF) are used
to operate the main Teletext functions. The symbols below the keys are for Teletext.
The text keys are used to access the Teletext functions of your
television. Of course, your television must have Teletext capability.
TEXT ON: Puts the television in the Teletext mode.
TEXT OFF: Switches the television back to regular viewing mode.
On some televisions, this may be done by pressing the TEXT ON key several times.
EXPAND: Shows the top half of the Teletext page in larger letters.
By pressing again, you can see the bottom half of the Teletext page enlarged.
To return to regular Teletext viewing, press the EXPAND key again,
or press the TEXT ON key, depending on your television.
HOLD/STOP: Stops changing pages.
MIX: Shows teletext and regular television simultaneously.
You may also use this key for subtitling. On some televisions
this function is accessed by pressing the text key twice.
16:9: This key provides you the (16:9) wide screen view
function (if available on your original remote).
The Keypad

6WWW.ONEFORALL.COM
How to set up the URC-9040 to control your PC
The URC-9040 PC Media Remote with OFA Media Centre allows you to control your digital content and
access it on your PC or on your home entertainment system, via the Command Center. The Command
Center connects to your PC by a USB cable.
NOTE: - The antenna of the RF receiver should be placed in the upright position!
- This product is not intended to be used with any USB extension cable!
To set up your Command Centre with your PC and install the OFA PC Media Centre
application, simply insert the setup CD supplied in the package into your PC,
select the language, and follow the on screen instructions.
IMPORTANT: You do not need to program a device code into the URC-9040 PC Media Remote
with OFA Media Centre to control the Command Center. However, it is possible that someone else in your
building or complex may also have a URC-9040 Media Remote with OFA Media Centre. Therefore so
the URC-9040 remote contains 3 different addresses for the Command Center, which you can cycle
between to avoid conflicting signals.
NOTE: If more than 10 seconds pass between key presses, the URC-9040 remote
exits programming.
To change the Command Center address:
1. Press PC.
2. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-9040’s LED (red light) blinks twice
(the LED will blink once and then twice).
3. Press 41 (address 1), 42 (address 2), or 43 (address 3) to change
the address. The LED will light up twice.
NOTE: If the power key displays a long blink, the entry is invalid. Repeat steps 1 through 3.
NOTE: You must also change the address on the OFA Media Centre application to match the address
setup on your URC-9040.
Note the PC address being used below:
Setting up the URC-9040
or >
or >

WWW.ONEFORALL.COM 7
How to set up the URC-9040 to control your Devices
Example: To set up the URC-9040 for your Television (on the TV key):
1. Find the code for your device in the Code list. Codes are listed
by device type and brand name. The most popular code is listed first.
Make sure your device is switched on (not on standby).
2. Press and release the TV key on the URC-9040.
3. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-9040’s LED (red light)
blinks twice (the LED will blink once and then twice).
4. Enter your five-digit device code using the number keys.
The LED will blink twice.
5. Now, aim the URC-9040 at your device and press POWER. If your device
switches off, the URC-9040 is ready to operate your device.
6. Turn your device back on and try all the remote’s functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.
7. If your device does not respond, follow steps 1 to 5 with each
code listed for your brand. If none of the codes listed for your
brand operate your device, or if your brand is not listed at all,
try the Search Method described on page 8.
- Most TV’s do not switch on pressing the POWER key. Please try pressing a “number”key
or the “TV-text off”key to switch your TV back on.
- If your device’s original remote control does not have a POWER key, press PLAY instead of
POWER when setting up your device.
- Some codes are quite similar. If your device does not respond or is not functioning properly
with one of the codes, try another code listed under your brand.
- Remember to press the corresponding device key before operating your device.
The TV, STB and AUDIO keys are not mode specific. So it is possible to
set up a second Television on the STB key (If you do not have a Set-Top-Box)
or a second satellite receiver on the AUDIO key for example.
Exception is the PC key. The PC key is a dedicated mode key that cannot be
used for any other device than a PC.
Setting up the URC-9040
ONE FOR A
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0009
0087, 0093,0363, 041
0217, 0216
0264
0516
0087
0216, 0009,0037, 0
0037, 0274
0361, 0208, 0371
_____

8WWW.ONEFORALL.COM
Search Method
—> If your device does not respond to the URC-9040 after you have tried all
the codes listed for your brand.
—> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained
in the memory of the URC-9040.
Example: To search for your TV code (on the TV key):
1. Switch ON your television (not on standby) and aim your URC-9040 at your TV.
2. Press and release the TV key.
3. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will blink
once and then twice).
4. Press 9 9 1. The LED will blink twice.
5. Press 1 to scan through all TV codes. *
6. Next, press POWER.
7. Aim the URC-9040 at your Television. Now press CH+ over and over,
until your Television turns off (every time you press the CH+ key the
URC-9040 will send out a POWER signal from the next code contained
in the memory). You may have to press this key many times
(up to 150 times) so please be patient. If you skip past a code,
you can go to the previous code(s) by pressing the CH- key.
Remember to keep pointing the URC-9040 at your Television
while pressing this key.
8. As soon as your television turns off, press OK to store the code.
(*) to scan through other device types:
- Most TV’s do not switch on pressing the POWER key. Please try pressing a “number”key
or the “TV-text off”key to switch your TV back on.
- If you cannot control your Television properly, please continue the Search Method, you may
be using the wrong Code.
- To search for the code for another device follow the instructions above only press the appropriate
device key instead of TV during step 2 and the appropriate number during step 5.
Setting up the URC-9040
Press: to scan through codes for:
Set-Top-Box or Satellite Receiver or Cable Converter
Television
DVD player/recorder or PVR (codes achieved by code upgrade)
Amplifier or Amp./Tuner or Miscellaneous

WWW.ONEFORALL.COM 9
Once you have Set-Up your URC-9040, you can blink back your SET-UP CODE
for future reference.
Example: To blink out the code programmed in TV mode:
1. Press and release the TV key.
2. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED
will blink once and then twice).
3. Press 9 9 0. The LED will blink twice.
4. For the first digit of your five-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is „0“.
5. For the second digit, press 2 and count all the red blinks.
If there are no blinks, the digit is „0“.
6. For the third digit, press 3 and count all the red blinks.
If there are no blinks, the digit is „0“.
7. For the fourth digit, press 4 and count all the red blinks.
If there are no blinks, the digit is „0“.
8. For the fifth digit, press 5 and count all the red blinks.
If there are no blinks, the digit is „0“. Now you have your five-digit code.
To blink back the code for your other devices press the appropriate device key during step 1.
Setting up the URC-9040
Quick Code Reference
Write down the codes for your devices in the boxes below for quick and easy reference.
Device key Device Code
_____________________________________________
_____________________________________________
_____________________________________________
■■■■■■ ■■ ■■
■■■■■■ ■■ ■■
■■■■■■ ■■ ■■

10 WWW.ONEFORALL.COM
The URC-9040 comes with a complete library of pre-programmed codes. After you have set up
the URC-9040 for your device, you may find that there are one or more keys that you had
on your original remote, which do not have a place on the URC-9040 keypad.
As a convenience, the URC-9040 offers a special Learning feature that
allows you to copy any function from your original remote control onto the
keypad of the URC-9040.
Before you start:
- Make sure your original remote control is working correctly.
- Make sure neither your URC-9040, nor your original remote control is pointing at your device.
Example: To copy the “mono/stereo”function from your original TV
remote onto the “LAST”key of your URC-9040.
1. Place both remote controls (the URC-9040 and your original) on a flat surface.
Make sure the ends which you normally point at your device are
facing each other. Keep the remotes at a distance of 2 to 5 cm.
2. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-9040’s LED (red light)
blinks twice (the LED will blink once and then twice).
3. Press 9 7 5 (the LED will blink twice).
4. Press the device key (on the URC-9040 remote) to select the mode
to which you want to copy the learned function (example: TV key).
5. Press the key (on the URC-9040 remote) where you want to place
the learned function (example: LAST key). The LED will flash rapidly.
6. Press and hold the key (on your original remote) that you want
to copy until the LED on the URC-9040 blinks twice (example:
“mono/stereo”key).
7. If you want to copy other functions within the same mode, simply repeat
steps 5 and 6 pressing the next key you want to copy by learning.
If you want to copy other functions to a different mode, then repeat from
step 4 onwards and press the applicable mode key.
8. To exit the learning mode, press and hold OK until the LED blinks twice.
9. Learning is mode specific. To access your learned function, press the appropriate device key first.
The Learning Feature

WWW.ONEFORALL.COM 11
- During steps 2 - 7 (page 10), you have approximately 10 seconds to conduct each step.
If there is a gap of more than 10 seconds between two steps, you will have to start
again from step number 2.
- The Learning feature is mode specific. Therefore you can place one learned feature
per mode on the same key.
- The URC-9040 can learn approximately 25 - 40 functions (depending on the function
to be learned). Memory full will be indicated by two long blinks.
- You can replace a learned function by placing another learned function on top.
- Learning should not be done in direct sunlight or under incandescent lights.
- Make sure you are using new batteries before following the instructions above.
Upon changing the batteries, your learned functions will be retained.
To delete a learned function:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED
will blink once and then twice).
2. Press 9 7 6 (the LED will blink twice).
3. Press the device key in which the function will be deleted.
4. Press twice on the learned key which will be deleted (the LED will blink twice).
5. If there is another “learned function”which you wish to delete, repeat steps 1 - 4.
Result: The original functions of the URC-9040 will now be present.
To delete all learned functions within a specific mode:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
2. Press 9 7 6 (the LED will blink twice).
3. Press the appropriate device (mode) key twice. The LED will blink twice.
All keys in the device mode are now restored to the original functions.
The Operational Reset will erase all learned functions across all modes and
some other programmed functions like Macros.
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
2. Press 9 8 0 (the LED will blink four times).
The Learning Feature
Operational Reset

12 WWW.ONEFORALL.COM
Volume Punch Through
If no volume-function is present on your device, you will obtain the volume of the device that
is programmed on the AUDIO key.
Volume Punch Through allows you to use the volume from another mode
without having to select this. E.g. controlling your TV volume while being in STB mode.
To punch through to TV volume while in the STB or AUDIO mode:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
2. Press 9 9 3. The red light will blink twice.
3. Then press the TV key and the red light will blink twice.
To cancel the “Volume Punch Through”per mode:
(Example: to cancel the “Volume Punch Through”for the STB mode)
1. Press STB once.
2. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
3. Press 9 9 3. The red light will blink twice.
4. Then press the Volume (-) key and the red light will blink four times.
Result: being in STB mode, you will be able to control VOL+/- or MUTE
functions of your STB (provided it has volume control).
To cancel the „Volume Punch Through“for all modes:
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice (the LED will
blink once and then twice).
2. Press 9 9 3. The red light will blink twice.
3. Press the Volume (+) key and the red light will blink four times.
Result: all devices will operate their own volume-function again (provided it is present).
Extra Features

WWW.ONEFORALL.COM 13
Macros (Sequence of commands within a certain mode)
Within a certain device mode you can program your URC-9040 to issue a sequence of commands
at the press of one key.
Example: To program a macro on the LAST key to go to “AV”mode (in TV mode) then
to channel 801 of your Set-Top-Box.
1. Press and release TV key to select the mode where you want to execute the macro.
2. Press and hold down REWIND + FASTFORWARD simultaneously until the
URC-9040’s LED (red light) blinks twice (the LED will blink once and then twice).
3. Press 9 9 5. The LED will blink twice.
4. Then press the LAST key (to which the Macro will be assigned).
5. Next press TV then AV then STB then 801to select the desired channel on your
Set-Top-Box.
6. To store the Macro, press and hold the OK key until the LED will blink twice.
Result: In TV mode, when you press and hold the LAST key the URC-9040 will send commands to go in
“AV”mode then switch to STB mode and go to channel 801 of your Set-Top-Box.
-If you need to build in some delay into the sequence please use the corresponding
device-mode key (e.g. STB key in example above) to do so. You may press this key
several times to build in more delay.
- Each MACRO can consist of a maximum of 32 key strokes.
- Make sure that you program a Macro on a spare key, as the Macro will overwrite
the pre-programmed function in the mode where the Macro is programmed.
- If you had to hold down a key for a few seconds on the original remote control
to get a function, this function may not work in a macro on your URC-9040 remote.
Erasing the Macro
Example: To erase the Macro from the LAST key in STB mode, press:
1. Press and release the device key (e.g. STB key) to select the mode
where the macro is stored.
2. Press and hold down REWIND + FASTFORWARD simultaneously until the
URC-9040’s LED (red light) blinks twice (the LED will blink once and then twice).
3. Press 9 9 5. The LED will blink twice.
4. Press the LAST key (from which you want to erase the macro).
5. To clear the Macro, press and hold the OK key until the LED will blink twice.
It is also possible to program a macro on a device key (Mode-Key-Macro). Just follow the example above
and press the corresponding device key during step 4 (you can skip step 1). To activate the Mode-Key-
Macro press and hold the corresponding mode key pressed for about 3 seconds. Pressing and releasing
the programmed mode key will still act as a mode switch.
To erase the Mode-Key-Macro please follow the “Erasing the Macro”section and press the
corresponding device key during step 4 (you can skip step 1).
Extra Features
Mode-Key-Macro

14 WWW.ONEFORALL.COM
Power Macro (Sequence of Power commands)
Example: You can program your URC-9040 to (being in TV mode) to turn ON
your TV, Audio and Set-Top-Box at the press of one key in any mode.
1. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-9040’s LED (red light)
blinks twice (the LED will blink once and then twice).
2. Press 9 9 5. The LED will blink twice.
3. Then press the POWER key (to which the Power Macro will be assigned).
4. Next press and release TV then 1then STB then AUDIO.
5. To store the Power Macro, press and hold the OK key
until the LED will blink twice.
Result: Being in TV mode; when you press and hold the POWER key pressed for
about 2 seconds, the URC-9040 will send the Power command to the TV
(your TV may not respond if it’s switched OFF as many TV’s require a number
key to switch On your TV) then turn ON your TV (to channel 1) and then
will send Power of the AUDIO and STB. The first command to be sent will
always be the Power of the current device mode. Thereafter the programmed
Power Macro will be sent.
- The Power Macro first sends Power from its current mode and then the actual Power Macro.
- Each mode key included in the Power Macro will send the Power command of that mode.
- Each MACRO can consist of a maximum of 8 keystrokes.
- If you had to hold down a key for a few seconds on the original remote control to get a function,
this function may not work in a macro on your URC-9040 remote.
Erasing the Power Macro
Example: To erase the Macro from the POWER key
1. Press and hold down REWIND + FASTFORWARD simultaneously
until the URC-9040’s LED (red light) blinks twice
(the LED will blink once and then twice).
2. Press 9 9 5. The LED will blink twice.
3. Press the POWER key (from which you want to erase the macro).
4. To clear the Macro, press and hold the OK key until
the LED will blink twice.
Extra Features

WWW.ONEFORALL.COM 15
Code Upgrade Technology
Your URC-9040 Remote contains a unique feature, which allows new codes to
be added simply by holding it to your telephone. In a matter of seconds,
our magnetic coupling technology quickly and reliably transfers information
to the URC-9040 Remote without complex plugs, adapters or attachments.
This means, as you buy new products in the future, the URC-9040 Remote will never
become obsolete.
Internet download
(Upgrade your URC-9040 Remote…via your PC)
1. Visit our website “www.oneforall.com”.
2. Select your region.
3. Select “Product support”.
4. Select “Universal Remote Controls”.
5. Select the ONE FOR ALL remote you want to
upgrade: URC-9040 (PC Media Remote).
6. Select ‘Internet Download’.
Now you have entered our special Online Download section.
From this point just follow the instructions on the screen for easy upgrade of your remote.
Phone upgrade
(Upgrade your URC-9040 remote…via your phone)
Alternatively ring our consumer help-line and one of our customer
service representatives will assist you through the entire process of
upgrading your URC-9040 Remote. To ensure the process goes
smoothly, here are a few steps to follow:
1. Write down the brand name(s) and model number(s) of your
device(s) (see the table provided on the Consumer Service
page) before you call.
2. Ring our consumer help-line and explain which device(s) you would like
to add to your URC-9040 Remote.
3. After our customer service agent records the brand name(s) and model number(s) of your device(s),
he/she will lead you through the set up procedure and then will ask you to hold the URC-9040
Remote to the speaker portion of your telephone (see diagram below). In doing this, the information
needed for your device is transferred through the telephone into your URC-9040 Remote in a matter
of seconds.
IMPORTANT: cordless telephones, speaker telephones and mobile telephones are
not recommended.
4. After your URC-9040 Remote has been upgraded by telephone, stay on the line. Our customer service
agent will ensure that your URC-9040 Remote is working properly with your device(s) and will answer
any other questions you may have.
Extra Features

16 WWW.ONEFORALL.COM
Trouble-Shooting
Problem:
Your brand is not listed
in the code section?
The URC-9040 does
not operate your device(s)?
The URC-9040 is not
performing commands
properly?
PC related problems?
Problems changing
channels?
The URC-9040 does
not respond after
pressing a key?
The LED does not blink when
you press a key?
Solution:
Try the search method on page 8.
A) Try all the codes listed for your brand.
B) Try the search method on page 8.
You may be using the wrong code. Try repeating the Direct
Set-Up using another code listed under your brand or start
the search method over again to locate the proper code.
See the help file in OFA Media Centre, or for the latest FAQs,
check our website at www.oneforall.com”.
Enter the programme number exactly as you would on your
original remote.
Make sure you are using new batteries and are aiming
the URC-9040 at your device.
Replace batteries with 2 fresh, new “AAA/LR03”alkaline
batteries.

WWW.ONEFORALL.COM 17
If you still have questions about the operation of your URC-9040 PC Media Remote and could not find
the answer(s) in the Trouble Shooting section, you may want to contact the customer service
department for assistance.
You may care to visit our Internet-site: www.oneforall.com
Our internet-site has many advantages:
- 24 hours access
- no waiting time
- page for Frequently Asked Questions
- info about the ONE FOR ALL product range
Before contacting us, by Fax, E-mail or Phone, make sure you have the required information
available by filling in the table below.
What do we need to know before you contact us:
1That you have the URC-9040 (*) PC Media Remote universal remote.
2The date of purchase (.........../.........../...........).
3A list of your equipment/models: (see example below).
Device Brand Device Remote SET-UP
model nr. model nr. code
TV Sony KV-25C5D RM-883 11505 (example)
Type/model numbers can often be found in your equipment owner’s manual or on the factory
plate behind the device.
4. Then Fax, E-mail or Dial us:
In the UK
E-mail : [e-mail] (***)
Fax : [phone]
Tel. : [phone] (£ 0,50 per minute) (*) (**)
In Ireland In Australia
E-mail : [e-mail] (***) E-mail : [e-mail] (***)
Fax : [phone] Fax : [phone]
Tel. : [phone] (*) (**) Tel. : [phone]
In South Africa In New Zealand
E-mail : [email protected] E-mail : [e-mail] (***)
Fax : [phone] Fax : [phone]
Tel. : [phone] Tel. : 0508 ONE 4 ALL (663 4 255)
Tel. : [phone]
(*) When you call us you will be asked to enter a URC-number.
The URC-number of this product is URC-9040.
(**) When calling with a mobile phone:
- You may be charged extra when calling us from; the UK or France.
- You may not be able to contact us when calling from; Belgium, the Netherlands, Luxemburg,
Greece, Portugal, Switzerland, Italy, Ireland or Austria.
(***) Just send a blank message, you’ll get auto-reply.
Customer Service

18 WWW.ONEFORALL.COM
Declaration of Conformity
We, Universal Electronics Inc., 6101 Gateway Drive, Cypress, CA 90630, U.S.A., and its subsidiaries
Universal Electronics BV, Institutenweg 21, 7521 PH Enschede, Netherlands,
ONE FOR ALL GmbH, Fabrikstra_e 3, 48599 Gronau, Germany,
ONE FOR ALL UK Ltd, Institutenweg 21, 7521 PH Enschede, Netherlands,
ONE FOR ALL FRANCE S.A.S., Rue Paul Séramy 17, 77300 Fontainebleau, France,
ONE FOR ALL IBERIA S.L., Ctra. Hospitalet, 147-149, 08940 Cornelláde Llobregat, Barcelona, España,
ONE FOR ALL ARGENTINA S.R.L., AV. Las Heras 2126, 5th Floor (Suite “C”)
ZC 1111, Recoleta, Buenos Aires, Argentina
Declare under sole responsibility that the IR/RF ONE FOR ALL PC Media remote
(URC 11-9040R00) and the 433.92Mhz RF USB Receiver (URC-3010 BAO-xx)
is in conformity with the essential requirements as described in Directive 1999/5/EC and satisfies
all the technical regulations to the product within this directive.
EN 300 220-3
EN 301 489- 1/3
IEC 60950
Manufacturer:
UNIVERSAL ELECTRONICS BV
Insitutenweg 21
7521 PH Enschede
Netherlands
Enschede, 23 November 2005
Paul J. Bennett
As Managing Director of Universal Electronics BV
0560