Operative Experience TCCS Plus User manual

1Equipment Identication
QUICK START GUIDE
To get started, please follow these easy steps:
+Turn on the tablet and select an available WiFi network
+Download the OEI Sim application from the iOS or
iPadOS App store, Mac OS App store, Google Play store,
or Microsoft store
+Go to the tablet’s WiFi settings and disconnect the WiFi
network you used to download the application
2Download the OEI App onto the Tablet
Tactical Casualty Care
Simulator (TCCS) Plus
3Charge Battery
+Plug the battery pack charger into a standard electrical
outlet. The red light indicates charging and turns green
when the batteries are fully charged.
+Charge the batteries six (6) to eight (8) hours
(or overnight).
+Simulator
+2-Way
Communication
+ 1 Instructor Tablet
1 Patient Monitor Tablet
+Hand Pump
(for blood*)
+Battery Pack
and Charger
*Simulated blood also supplied.

+Press the Power button located in the battery console until
the button light illuminates.
+If using the Power Cord, plug the cord into the connection
adjacent to the power button, securing by turning
clockwise to lock into place.
+Allow the simulator approximately two (2) minutes to
cycle through the powering up sequence.
6
+Remove the cover on the upper left thigh to access
and open the compartment.
+Attach the battery to the connector.
+Reset the battery in the compartment.
+Replace the cover.
4Install Battery
Power On
+Fill the reservoir on the hand pump with simulated blood.
+Locate the blood fill port on the simulator’s right waist.
+Attach the hand pump’s blood fill hose by snapping onto
the blood fill port. (Be sure the hose nozzle is free of debris.)
+Retract the handle and pump approximately three (3)
times or until the simululator’s blood reservoir is full.
5Add Blood to the Simulator
TCCS Plus QUICK START GUIDE

TCCS Plus QUICK START GUIDE
+Go to the instructor tablet’s wireless access.
+Locate the WiFi Network indicated by
identification and serial number
+Enter the Password: oeiadmin
+Click the shortcut icon on the Instructor Tablet to
open the OEI Sim application. The software loads
and the Welcome screen appears.
7Connect to the Simulator’s WiFi Network 8Access the OEI SIM App on the Tablet
+Locate the simulator from the list of Available Simulators.
+Click Connect.
The application connects to the simulator
and the Instructor Interface appears.
+Press the Play button on the Instructor Interface
to begin the simulation.
See full user manual at operativeexperience.com/support
for detailed instructions
9
10
Select the Simulator
Begin Simulation

following the same instructions as the instructor tablet
Select Trainee interface in the App settings menu to
access the patient monitor mode
operativeexperience.com | 500 Principio Parkway West, Suite 900 | North East, MD 21901 | 410-287-5748 © 2019 Operative Experience, Inc.
Questions and Support
For in-depth answers on how to use your simulator consult the
User Manual downloadable from the OEI App welcome screen
or from the website at operativeexperience.com/support.
If you need personal assistance with your simulator, contact us at
Phone: [phone]
Email: [e-mail]
TCCS Plus QUICK START GUIDE
+Stop Simulation by pressing
the Stop button on the
Instructor Interface.
+Power off simulator by pressing
the Power Button on the right
shoulder.
The illuminated light flashes until
the unit automatically powers off.
12 Powering O
+Download the OEI App and connect to the simulator
11Patient Monitor Tablet