Optomed AURORA IQ User manual

QUICK GUIDE
Shutter button
Battery cover
Optoroller
• Access and
navigate in
menu
Battery level
Power button
• Short press, power on
• Long press, power o
Back button
WLAN
Device overview
User interface
Retinal module
Camera
Battery
Anterior module
Charging Station
Extra battery
Optics eject button
Eye cup
Patient
Fixation
target
Diopter
value
Brightness

Preparations and Settings
*For manual mode see User Manual
Cover other eye
and keep both
eyes open Patient, camera,
and examiner
should be aligned
in a straight line
Patient position;
seated or lying
down Dim room/lights o
2. Enter menu 3. Choose focus:Auto/manual* 1. Power on
4. Choose exposure:
Auto/manual*
5. Choose fixation target:
macula centric/optic disc centric
6. Create new study
in patient menu
7. Choose study:
• anonymous study,
• patient study with ID, or
• patient from worklist
RIGHT EYE LEFT EYE RIGHT EYE
Create patient with ID:
write patient name and ID.
Power button reveals more
characters.
Imaging
Clean eye cup

Imaging
Red aim help; retina not in full view yet.
Fine-tune from the front.
Approach the GRAY oval reection at the top of
the pupil until retina fully appears on display
Use both hands to support the device, stabilize
from the forehead
Approach pupil from 5-10 cm distance keeping
it in the middle and press the eye cup rmly
around the eye
Green rectangular in display; focusing ready.
Press shutter.
Green aim help; focusing has started. Hold still.
BEEP!

www.optomed.com
R 2.0
2022 10 20
After imaging
Image quality issues
Imaging distance is too far away
if there is a reection in the bot-
tom of the image. If the imaging
distance is too close, a reection
in the top of the image appears.
Check the refraction value and
ask the patient to xate to the
target led or use autofocus
Adjust the brightness of the image
manually by increasing (>5) or
decreasing (<5) the exposure level
1. Press Optoroller to access image
3. Transfer images wirelessly via WLAN or
using USB via Charging Station
4. Erase images from camera
Settings > Camera > Erase image memory
2. Choose right/left eye to save image, or
click Exit preview to save image without
eye selection
Right eye
Zoom
Left eye
Delete
Read the User Manual for more
information before use
REFLECTIONS IN THE IMAGE IMAGE IS NOT IN FOCUS IMAGE IS TOO DARK OR BRIGHT