The difference is right on top: aggressive chisel cutters that cut fast and smooth
Offset depth gauges reduce roughness and help prevent the
cutter from diving into the sidewall of the cut
Top-plate witness mark helps make
sharpening easier and indicates the
chain’s end-of-life
Lubriwell™
holes help
carry oil
around the
full length
of the bar’s
rails The LubriLink™ cavities in tie straps
on BOTH sides of the chain help
keep more oil where it’s needed: on
the chain and bar
With professional users
it’s all about performance,
and for professionals who
use .325”-pitch saws, the
top performing chain is
Oregon®Super 20 series:
20LP, 21LP and 22LP.
Chain Recommended Recommended
Pitch Type Gauge Bar Lengths Saw Sizes
Super 20 Series Chains – the #1 pro chain for .325”-pitch saws
.325” 20LP .050” 11” - 20” 2.3 - 3.8 cu. in.
21LP .058” (28 - 50 cm) (38 - 62 cc)
22LP .063”
Multi-Cut™ 20 Series Chains – for use in highly abrasive conditions
.325” M20LP .050” 11” - 20” 2.3 - 3.8 cu. in.
M21LP .058” (28 - 50 cm) (38 - 62 cc)
M22LP .063”
serious injury to the saw operator or bystanders. These are NOT
low-kickback chains. DO NOT use Oregon
®
20LP, 21LP or 22LP
chain unless you have experience and specialized training for
dealing with kickback. Saw chain with lower kickback potential
is available. Users of low-kickback 33SL, 34SL and 35SL chains
should be aware that switching to a professional Super 20 Series
chain will increase the risk of injury due to kickback. Oregon
®
33SL, 34SL and 35SL will continue to be available as a low-kick-
back (blue label) offering for users of .325”-pitch saws.
Did you know that in one minute of operation,
each link on your cutting chain will travel
more than half again as far as the piston in a
two-cycle engine will at 10,000 rpm? And did
you know that each of those chain links will
make 32 reversals of direction – per second!
Saw chain may look like a simple product, but
it’s not. In today’s growing global economy
new manufacturers are emerging for many
products. When it comes to the chain on your
chainsaw, it’s important to know your chain’s
manufacturer. For over 55 years, Oregon Cut-
ting Systems has been the world leader in
saw chain innovation, patents and expertise.
Oregon Cutting Systems Group, Blount Inc. •www.oregonchain.com •503-653-8881 •A107039 AA 0805
In the most popular cutting mode: nose-clear bucking, 20LP
chain cut 8% more wood than 33LG. 20LP outperformed 33LG on boring cuts
and bias cuts as well. Test wood used: Douglas Fir, test saw used: Husqvarna 340 with a 16” bar.
Vibe Ban™ chassis reduces vibration
at the saw’s handles by 25% or more
Oregon
®
Super 20 chains may be
capable of kickback that could result in
Top features make Super 20 Series chain the top performer
Top features make Super 20 Series chain the top performer
Super 20 chain makes your chainsaw a more efficient cutting machine, one that does more cutting per saw horsepower
Super 20 chain makes your chainsaw a more efficient cutting machine, one that does more cutting per saw horsepower
Know your saw chain, and know your saw chain’s manufacturer
Know your saw chain, and know your saw chain’s manufacturer
