Oricom CU875 User manual

Ref: 130220
CU875
User Guide
1.0 Getting started
The CU875 baby unit (camera) suits SC875 5" Touchscreen Video Baby Monitor. Up to 4 baby units (cameras) can be registered to
one parent unit.
2.0 Registering the Baby Unit (Camera)
FOR ALL OTHER INSTRUCTIONS, PLEASE REFER TO YOUR SC875 USER GUIDE.
1.1 Power supply
a) Connect the small plug of the power adaptor to the baby unit and
the other end to the electrical mains power outlet.
b) To switch on the baby unit, slide the power switch to the ON
position. The power LED will light up.
c) To switch off the baby unit, slide the power switch to the OFF
position.
1.2 Connecting and aligning the baby unit
Position the baby unit with a minimum distance of 1m to other electronic
devices, otherwise there is a risk of mutual disturbance. Point the upper
section of the baby unit towards the baby or object you want to monitor.
Check that the baby or object is suitably displayed on the parent unit
screen. Ensure the antenna is extended vertically for optimum range.
Use only the AC adaptor supplied with the product as other
power adaptors could damage the product. This product is
designed for indoor use only.
NOTE:
Pairing a camera in a paired slot will overwrite the old camera
registration.
Pairing
This button on the base of the camera is used
to put the camera into pair mode. You can
select the camera number when pairing. Up to
4 Cameras may be paired.
1.
2.
Power on parent unit and camera unit.
The power LED for the parent unit should be ON.
Touch the live view screen on the parent unit, this will
activate the settings, volume, pan tilt and lullabies icons.
3. Press the [ ] button on the monitor.
4. Select [ ] icon.
5. The display will show the camera slots, this includes
paired cameras and unused slots. You can remove
paired cameras or add a camera to an unused slot.
When you select the slot, you will be prompted to press
the pair button on the camera, you have a 30 second
countdown to do this.

Express Warranty (Australia)
This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South
Windsor NSW 2756, herein after referred to as “Oricom”. Oricom products come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Oricom warrants that the product is free from defects in materials or workmanship during the Express Warranty Period. This Express
Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or modifies any condition, warranty, guarantee, implied term, right or remedy
pursuant to the Australian Consumer Law and which may not be so excluded, restricted or modified. For such conditions, terms,
guarantees and warranties that cannot be excluded, restricted or modified, Oricom limits the remedies available to extent permitted
in the relevant legislation.
The Express Warranty Period will be 3 years from the date of purchase of the product evidenced by your dated sales receipt.
You are required to provide proof of purchase as a condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the product at our discretion according to the terms and conditions of this
document if your product is found to be faulty within the Express Warranty Period. This Express Warranty extends to the original
purchaser only and is not transferable.
Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in
performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in
material or workmanship for thirty (30) days or for the remainder of the Express Warranty Period of the Oricom branded product
in which they are installed, whichever is longer.
During the Express Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. All
component parts removed under this Express Warranty become the property of Oricom.
In the unlikely event that your Oricom product has a recurring failure, Oricom may always, subject to the Competition and
Consumer Act 2010, at its discretion, elect to provide you with a replacement product of its choosing that is at least equivalent to
your product in performance.
No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative
of Oricom.
Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss,
damage or injury arising out of or in connection with a:
1. failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and
use of the product;
2. wilful misconduct or deliberate misuse by you of the product;
3. any external cause beyond our control, including but not limited to power failure, lightning or over voltage; or
4. modification to the product or services carried out on the product by anyone other than Oricom or Oricom’s authorised service
provider.
How to make a claim under your Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
•Please call or email our Customer Support Team, 02 4574 8888 or [email protected].
•A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. If so, they will
give you a Product Return Authorisation number.
•We will then email or fax a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the
goods for warranty service.
Please note that if a Customer Support Team member advises that your product does not qualify for return, this warranty does not apply
to your product. Products that are authorised to be returned to Oricom in Australia must include all of the following:
•A completed Return Authorisation form
•A copy of your Proof of Purchase (please keep your original copy)
•The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product to us. You must arrange and
pay any expenses incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to
us, however, we will arrange delivery of the repaired or replaced faulty product to you.
Important Information
Repair Notice
Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being
repaired.
Ref: 130220