Oricom OBH36T User manual

EN
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User Guide (available for
download from www.oricom.com.au/support/).
1. Contents Inside Box
x 2
Baby Unit
(Camera)
Parent Unit Power Adaptors Star Grip Quick Start Guide
WARNING:
Strangulation hazard. Children have STRANGLED on cords. Keep this
cord out of the reach of children (more than 1 metre away). Never
use extension cords with AC Adaptors. Only use the AC Adaptors
provided.
Model:
OBH36T

2. Setting up your Nursery Pal Premium
A. Connecting the Power Supply of the Baby Unit.
• Connect the USB type-C plug of the power adaptor to the Baby
Unit and the other end to mains power.
• Only use the enclosed adaptor (5V DC / 1500mA).
Privacy Protector
This is to disable the live camera video feed by blocking the
camera lens.
• Press the knob to release the lock.
• You can move the protector to its open or closed position after
the lock is released.
• When you hear the click sound the protector is at its proper
positions.
IMPORTANT:
Make sure the privacy protector does not cover the camera lens
when in use.
Sound is NOT disabled when the protector covers the camera lens.

B. Connecting the Power Supply of the Parent Unit.
• Connect the USB Type-C plug of the power adaptor to the parent
unit and the other end to mains power. Only use the supplied
adaptor (5V DC / 1500mA).
• A rechargeable battery allows the parent unit to be used when
not plugged into mains power. The battery provides up to 8
hours operation of the Parent Unit with the screen turned off. We
recommend charging for at least 4 hours before rst use, and
charging the battery each time the Parent Unit indicates that the
battery is low.
• Press and hold the POWER button on the top of the Parent Unit
to turn it ON.
• Flip out the stand on the back of the Parent Unit and rotate it by
90 degrees to set up the desktop stand.
3. Overview of Parent Unit
Antenna Vol + / -
Flash light
Touch screen display
Reset pin hole
Power socket Power button
Speaker
Ring stand

4. Basic operation of the keys
Parent unit
Power button Press and hold to turn on the Parent Unit ON/OFF.
Toggle once at standby mode to switch video on/off.
Vol+ and Vol- buttons Press -/+ to select volume level of the Parent Unit.
Reset pin hole Press and hold with a small pin to reset the unit.
Baby Unit
PAIR button Press and hold to pair with the parent unit or for Hubble
Wi-Fi®Setup. Located on the bottom of the camera.
5. Touch screen operation
25 °C
25 °C
Swipe up at the screen bottom to pop up the
menu bar.
Swipe down at the screen bottom to hide
the menu bar.
Scroll left/right on the menu bar to see all the
options.
Swipe left/right to pan the camera view.
Swipe up/down to tilt the camera view.
Note:
• Function works when in view mode only,
and not whilst the menu is active.

Menu Icons
LCD Brightness Level Control (8 Levels).
Zoom Level Control.
Audio Media selection - Personal Recordings , Lullabies/Soothing Sounds , Audio
Books , Volume control of media playback .
Tap to turn the ashlight on.
Alarm Setting
On status bar, indicates alarm set, and when ashing, that alarm time has been
reached or missed.
Tap to talk to Baby Unit.
Camera Control (add , del , view , scan ).
Set Screen Off Timer (Off, 5 mins, 15 mins, 30 mins).
Temperature scale select (°C/°F)
Readings display in grey, but turns RED if > 29 °C / 84 °F or < 14 °C / 57 °F.
Displays HH °C / °F if >36 °C / 97 °F.
Displays LL °C / °F if < 1 °C / 34 °F.

* The playlist appears only if you make the audio recording via Hubble app.
Audio Media Playback menu icons
Tap to display personal recording*playlist.
Tap to display soothing sound or lullaby playlist.
Tap to display audio book playlist.
Volume control of media playback.
Play selected audio media on the playlist.
Stop playing audio media.
6. Display icons
Signal Level (5 Levels).
Night Vision Mode (Video also changes to Black/White).
Indicates the screen off timer is set.
Volume Level Control (8 Levels).
No Baby Unit detected.
Battery Level Indicator (4 Levels).

7. Setting up the Camera Unit for Wi-Fi®internet viewing
A. Install HubbleClub for Partners.
• Scan the QR code with your smart device and download the
HubbleClub for Partners from the App Store for iOS devices or
from the Google Play™ Store for Android™ devices.
• Install the HubbleClub for Partners on your device.
B. View on Compatible Smartphones and Tablets.
Camera Unit Connect to Internet
via Wi-Fi®
Compatible
Viewing Devices
1. Open the HubbleClub for Partners on your compatible smartphone or tablet.
2. Follow the in-app instructions to create your Hubble account and connect to your device.
Please take note of the following minimum system requirements:
Smartphones/Tablets: iOS 12.0, Android™ 8.0
Wi-Fi ®requirements:
At least 0.6 Mbps upload bandwidth per Smart Monitoring Companion, test your Internet speed at:
http://www.speedtest.net/

8. Important Safety Information
• Your Oricom baby monitor is designed to be an aid and should not be used as a substitute for
responsible and proper adult supervision of a child.
• The baby monitor has been designed to provide some added reassurance in the form of video/
sound transmission for those times when you are not in the same room as your baby provided you
always stay within hearing range of the baby monitor during use.
• Your baby monitor is not a medical device, nor a device to prevent cases of Sudden Infant Death
Syndrome (SIDS) or "cot death", and you should not rely on it for your baby's wellbeing. It is
important that you regularly check on your baby personally.
• Make sure the baby unit, parent unit and mains adaptor cables are kept out of reach of your baby
and other young children at all times, as far away from the baby as practical.
• Never place the baby unit or parent unit inside your baby’s cot, bed or playpen.
• Never cover the parent or baby units with clothes, towels or blankets or any other item.
• Never use or place your parent or baby unit in or near moisture or water (e.g. near bath or pool).
Immersing in water could cause electric shock and even death.
• The installation location plays an important role in ensuring proper operation. Therefore, maintain
a distance of at least one metre from other electronic equipment, such as microwave ovens or
Wi-Fi devices, otherwise they could cause interference.
• During continual use the baby unit power adaptors may become warm to the touch. This is normal
and should not be a concern.
• This product is not a toy, do not allow children to play with this monitor.
• This device is designed for indoor use only.

9. General Information
Express Warranty (Australia)
This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4
Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”.
Oricom warrants that the product is free from defects in materials or workmanship during the Express
Warranty Period. This Express Warranty does not extend to any product from which the serial number
has been removed or was purchased outside of Australia.
The benets of this Express Warranty are in addition to other rights and remedies you may have
under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure. In the event of a minor failure, Oricom reserves the right to choose to
repair or replace the product.
The Express Warranty Period will be a period of 24 months beginning on the date of purchase of the
product evidenced by your dated sales receipt. You are required to provide proof of purchase as a
condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the product at our discretion according to
the terms and conditions of this document if your product is found to be faulty within the Express
Warranty Period. This Express Warranty extends to the original purchaser only and is not transferable.
Products distributed by Oricom are manufactured using new materials or new and used materials
equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare
parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the
remainder of the Express Warranty Period of the Oricom branded product in which they are installed,

whichever is longer. During the Express Warranty Period, Oricom will where possible repair and if not
replace the faulty product or part thereof. All component parts removed under this Express Warranty
become the property of Oricom. In the unlikely event that your Oricom product has a recurring failure,
Oricom may always, subject to the Competition and Consumer Act 2010, at its discretion, elect to
provide you with a replacement product of its choosing that is at least equivalent to your product in
performance.
No change to the conditions of this Express Warranty is valid unless it is made in writing and signed
by an authorised representative of Oricom.
Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be
liable for any defect, loss, damage or injury arising out of or in connection with a:
1. Failure by you to adhere to the warnings and follow the instructions set out in this user guide for
the proper installation and use of the product;
2. Willful misconduct or deliberate misuse by you of the product;
3. Any external cause beyond our control, including but not limited to power failure, lightning or
over voltage; or
4. Modication to the product or services carried out on the product by anyone other than Oricom
or Oricom’s authorised service provider.
How to make a claim under your Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team, 02 4574 8888 or [email protected].
• A Customer Support Team member will verify after troubleshooting with you if your product
qualies under warranty. If so, they will give you a Product Return Authorisation number.
• We will then email a Return Authorisation form and a Repair Notice (if necessary), together with
instructions on how to return the product for warranty service.

Please note that if a Customer Support Team member advises that your product does not qualify for
return, this warranty does not apply to your product. Products that are authorised to be returned to
Oricom in Australia must include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in returning any faulty
product to us. You must arrange and pay any expenses incurred (including postage, delivery, freight,
transportation or insurance of the product) to return the faulty product to us, however, we will arrange
delivery of the repaired or replaced faulty product to you.
Important Information - Repair Notice
Please be aware that the repair of your products may result in the loss of any user-generated data
(such as stored telephone numbers, text messages and contact information). Please ensure that you
have made a copy of any data saved on your product before sending for repair. Please also be aware
that products presented for repair may be replaced by refurbished products or parts of the same type
rather than being repaired.

All rights reserved
Printed in China
Version 3.0
Ref: 2021-09-22
Oricom Customer Support
Oricom have a trained and dedicated team of Customer Support Representatives, each with the
knowledge and resources to assist in answering your questions quickly and efciently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom products, feel free to
contact Oricom or visit our website for answers to frequently asked questions.
[phone] / Monday - Friday 8am – 6pm AEST
Email: [email protected] / www.oricom.com.au
Oricom Support - New Zealand
0800 674 266 / Monday - Friday 10am - 8pm NZST
Email: [email protected]