ORiNG IES-3162GC Series User manual

Industrial
Management Ethernet Switch
IES-3162GC User’s Manual
Version 1.4 Aug, 2015.
ORing Industrial Networking Corp.
3F., NO.542-2, Zhongzheng Road, Xindian
District, New Taipei City, 231 Taiwan
Tel: + 886 2 2218 1066
Fax: + 886 2 2218 1014
Website: www.oring-networking.com
E-mail: [e-mail]
Manufacturer’s Documents
Title:
Drawing No.:
Rev. Level:
Date:
IES-3162GC user manual
IES-3162GC user’s
manual
V1.4
2015.08.14
IES-A3162GC user manual
IES-A3162GC user’s
manual
V1.4
2015.08.14

IES-3162GC User’s Manual
ORing Industrial Networking Corp
1
Table of Content
Getting to Know Your Switch........................................................................4
1.1 About the IES-3162GC Managed Industrial Switch.......................................................4
1.2 Software Features ..............................................................................................................4
1.3 Hardware Features.............................................................................................................5
Hardware Installation.....................................................................................6
2.1 Installing Switch on DIN-Rail.............................................................................................6
2.1.1 Mount IES-3162GC on DIN-Rail.....................................................................................6
2.2 Wall Mounting Installation..................................................................................................7
2.2.1 Mount IES-3162GC on the wall.......................................................................................7
Hardware Overview........................................................................................9
3.1 Front Panel ..........................................................................................................................9
3.2 Front Panel LEDs .............................................................................................................11
3.3 Top view Panel..................................................................................................................12
3.4 Rear Panel.........................................................................................................................12
Cables...........................................................................................................13
4.1 Ethernet Cables ................................................................................................................13
4.1.1 10/100/100BASE-TX/10BASE-T Pin Assignments.......................................................13
4.2 SFP.....................................................................................................................................14
4.3 Console Cable...................................................................................................................15
WEB Management........................................................................................16
5.1 Configuration by Web Browser.......................................................................................16
5.1.1 About Web-based Management......................................................................................16
5.1.2 System Information ........................................................................................................18
5.1.3 Front Panel......................................................................................................................18
5.1.4 Basic setting....................................................................................................................19
5.1.4.1 Switch Setting .......................................................................................................19
5.1.4.2 Admin Password ...................................................................................................20
5.1.4.3 IP Setting...............................................................................................................20

IES-3162GC User’s Manual
ORing Industrial Networking Corp
2
5.1.4.4 SNTP (Time).........................................................................................................21
5.1.4.5 LLDP.....................................................................................................................24
5.1.4.6 Auto Provision ......................................................................................................24
5.1.4.7 Backup & Restore .................................................................................................25
5.1.4.8 Upgrade Firmware ................................................................................................26
5.1.5 DHCP Server ..................................................................................................................26
5.1.5.1 DHCP Server –Setting..........................................................................................26
5.1.5.2 DHCP Server –Client List....................................................................................27
5.1.5.3 DHCP Server –Port and IP bindings ....................................................................27
5.1.6 Port Setting.....................................................................................................................29
5.1.6.1 Port Control...........................................................................................................29
5.1.6.2 Port Status .............................................................................................................30
5.1.6.3 Port Alias...............................................................................................................30
5.1.6.4 Rate Limit .............................................................................................................31
5.1.6.5 Port Trunk .............................................................................................................32
5.1.7 Redundancy ....................................................................................................................34
5.1.7.1 O-Ring...................................................................................................................34
5.1.7.2 Open-Ring.............................................................................................................35
5.1.7.3 O-RSTP.................................................................................................................37
5.1.7.4 RSTP.....................................................................................................................38
5.1.7.5 MSTP ....................................................................................................................41
5.1.8 VLAN.............................................................................................................................45
5.1.8.1 VLAN Setting .......................................................................................................45
5.1.8.2 VLAN Setting –Port Based..................................................................................47
5.1.9 SNMP .............................................................................................................................49
5.1.9.1 SNMP –Agent Setting ..........................................................................................49
5.1.9.2 SNMP –Trap Setting ............................................................................................50
5.1.10 Traffic Prioritization...................................................................................................51
5.1.11 Multicast ....................................................................................................................56
5.1.11.1 IGMP Snooping.....................................................................................................56
5.1.11.2 MVR .....................................................................................................................57
5.1.11.3 Multicast Filter......................................................................................................57
5.1.12 Security......................................................................................................................58
5.1.12.1 IP Security.............................................................................................................59
5.1.12.2 Port Security..........................................................................................................60
5.1.12.3 MAC Blacklist ......................................................................................................60
5.1.12.4 802.1x....................................................................................................................61

IES-3162GC User’s Manual
ORing Industrial Networking Corp
3
5.1.13 Warning......................................................................................................................64
5.1.13.1 Fault Alarm ...........................................................................................................65
5.1.13.2 System Alarm........................................................................................................65
5.1.14 Monitor and Diag.......................................................................................................69
5.1.14.1 MAC Address Table..............................................................................................69
5.1.14.2 MAC Address Aging.............................................................................................70
5.1.14.3 Port Statistics.........................................................................................................71
5.1.14.4 Port Monitoring.....................................................................................................72
5.1.14.5 System Event Log .................................................................................................74
5.1.14.6 Ping .......................................................................................................................74
5.1.15 Save Configuration ....................................................................................................75
5.1.16 Factory Default ..........................................................................................................76
5.1.17 System Reboot...........................................................................................................76
Command Line Interface Management ......................................................77
6.1About CLI Management.................................................................................................77
6.2 Commands Set List—System Commands Set................................................................82
6.3 Commands Set List—Port Commands Set.....................................................................84
6.4 Commands Set List—Trunk command set .....................................................................87
6.5 Commands Set List—VLAN command set....................................................................88
6.6 Commands Set List—Spanning Tree command set........................................................89
6.7 Commands Set List—QoS command set........................................................................91
6.8 Commands Set List—IGMP command set.....................................................................92
6.9 Commands Set List—MAC/Filter Table command set ..................................................93
6.10 Commands Set List—SNMP command set....................................................................93
6.11 Commands Set List—Port Mirroring command set .......................................................94
6.12 Commands Set List—802.1x command set....................................................................95
6.13 Commands Set List—TFTP command set......................................................................97
6.14 Commands Set List—SYSLOG, SMTP, EVENT command set.....................................98
6.15 Commands Set List—SNTP command set ...................................................................100
6.16 Commands Set List—O-Ring command set.................................................................101
Technical Specifications ...........................................................................102

IES-3162GC User’s Manual
ORing Industrial Networking Corp
4
Getting to Know Your Switch
1.1 About the IES-3162GC Managed Industrial
Switch
The IES-3162GC Ethernet switch is powerful managed industrial switch with many features.
The switch can work under wide temperature, dusty environment and humid condition. They
can be managed by WEB, TELNET, Consol or other third-party SNMP software as well.
Besides, these switches can be managed by a useful utility that we called Open-Vision.
Open-Vision is powerful network management software. With its friendly and powerful
interface, you can easily configure multiple switches at the same time, and monitor switches’
status.
1.2 Software Features
World’s fastest Redundant Ethernet Ring : O-Ring (Recovery time < 10ms over 250 units
connection)
Supports Ring Coupling, Dual Homing over O-Ring and standard STP/RSTP
Supports SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN Network Management
Event notification by Email, SNMP trap and Relay Output
Web-based ,Telnet, Console, CLI configuration
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
RSTP (802.1w)
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with double tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, mirroring, security
Remote Monitoring (RMON)

IES-3162GC User’s Manual
ORing Industrial Networking Corp
5
1.3 Hardware Features
Redundant two DC power inputs
Wide Operating Temperature: -40 to 60oC
Storage Temperature: -40 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
10/100/1000Base-T(X) Gigabit Ethernet port (combo port)
10/100Base-T(X) Ethernet port
100/1000Base-X on SFP port (combo port)
Console Port
Dimensions(W x D x H) : 96.4 mm(W)x 108.5 mm( D )x 154 mm(H)

IES-3162GC User’s Manual
ORing Industrial Networking Corp
6
Hardware Installation
2.1 Installing Switch on DIN-Rail
Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the
DIN-Rail. It is easy to install the switch on the DIN-Rail:
2.1.1 Mount IES-3162GC on DIN-Rail
Step 1: Slant the switch and mount the metal spring to DIN-Rail.
Step 2: Push the switch toward the DIN-Rail until you heard a “click” sound.
Metal Spring

IES-3162GC User’s Manual
ORing Industrial Networking Corp
7
2.2 Wall Mounting Installation
Each switch has another installation method for users to fix the switch. A wall mount panel
can be found in the package. The following steps show how to mount the switch on the wall.
2.2.1 Mount IES-3162GC on the wall
Step 1: Remove DIN-Rail kit.
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel. Just
like the picture shows below:

IES-3162GC User’s Manual
ORing Industrial Networking Corp
8
The screws specification shows in the following two pictures. In order to prevent switch
from any damage, the screws should not larger than the size that used in IES-3162GC switch.
Pozidrive

IES-3162GC User’s Manual
ORing Industrial Networking Corp
9
Hardware Overview
3.1 Front Panel
The following table describes the labels that stick on the IES-3162GC.
Port
Description
10/100 RJ-45 fast
Ethernet ports
8 10/100Base-T(X) RJ-45 fast Ethernet ports support
auto-negotiation.
Default Setting :
Speed: auto
Duplex: auto
Flow control : disable
Gigabit RJ-45 port
2 10/100/1000Base-TX Giga ports (combo)
Fiber port
2 100/1000Base-X on SFP port (combo)
Console
Use RS-232 to RJ-45 connecter to manage switch.
Reset
Push reset button 2 to 3 seconds to reset the switch.
Push reset button 5 seconds to reset the switch into Factory
Default.

IES-3162GC User’s Manual
ORing Industrial Networking Corp
10
IES-3162GC
1. LED for PWR. When the PWR UP, the green led will be light on
2. LED for PWR1. When the PWR2 links, the green led will be light on.
3. LED for PWR2. When the PWR2 links, the green led will be light on.
4. LED for R.M (Ring master). When the LED light on, it means that the switch is the ring
master of Ring.
5. LED for Ring. When the led light on, it means the Ring is activated.
6. LED for Fault. When the light on, it means Power failure or Port down/fail.
7. Console port (RJ-45)
8. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
9. 1000Base-X COMBO SFP Port Link/Act LED
10. 1000Base-T gigabits Ethernet port COMBO 1000Base-X Fiber port on SFP
11. 10/100/1000 Base-T(X) Ethernet ports Link LED
12. 10/100/1000 Base-T(X) Ethernet ports Act LED
13. 10/100/1000 Base-T(X) Ethernet ports

IES-3162GC User’s Manual
ORing Industrial Networking Corp
11
3.2 Front Panel LEDs
LED
Color
Status
Description
PWR
Green
On
DC power ready
PW1
Green
On
DC power module 1 activated.
PW2
Green
On
DC power module 2 activated.
R.M
Green
On
O-Ring Master.
Ring
Green
On
Ring enabled.
Slowly blinking
Ring has only One link. (lack
of one link to build the ring.)
Fast blinking
Ring work normally.
Fault
Amber
On
Fault relay. Power failure or
Port down/fail.
10/100Base-T(X) Fast Ethernet ports
LNK / ACT
Green
On
Port link up.
Blinking
Data transmitted.
Full Duplex
Amber
On
Port works under full duplex.
Gigabit Ethernet ports
LNK/ACT
Green
On
Port link up.
Blinking
Data transmitted.
Indicator
Amber
On
Port link on 100Mbps
SFP ports
LNK / ACT
Green
On
Port link up.
Blinking
Data transmitted.

IES-3162GC User’s Manual
ORing Industrial Networking Corp
12
3.3 Top view Panel
The bottom panel components of IES-3162GC are shown as below:
1. Terminal block includes: PWR1, PWR2 (48V DC)
Suitable for 12-28 AWG (3.3mm2–0.08mm2) wire size, torque value 4.5 lb-in (0.508 N-m)
2. Ground wire
The minimum cross-sectional area of Earthing conductor shall equal to input wiring cable.
.
3.4 Rear Panel
The components in the rare of IES-3162GC are shown as below:
1. Screw holes for wall mount kit.
2. DIN-Rail kit

IES-3162GC User’s Manual
ORing Industrial Networking Corp
13
Cables
4.1 Ethernet Cables
The IES-3162GC switch have standard Ethernet ports. According to the link type, the
switches use CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs, servers,
switches, routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications
Cable
Type
Max. Length
Connector
10BASE-T
Cat.3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat.5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-TX
Cat.5/Cat.5e 100-ohm UTP
UTP 100 m (328ft)
RJ-45
4.1.1 10/100/100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
1000 Base-T RJ-45 Pin Assignments
Pin Number
Assignment
1
BI_DA+
2
BI_DA-
3
BI_DB+
4
BI_DC+
5
BI_DC-
6
BI_DB-
7
BI_DD+
8
BI_DD-
The IES-3162GC switch supports auto MDI/MDI-X operation. You can use a
straight-through cable to connect PC to switch. The following table below shows the
10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
10/100 Base-TX MDI/MDI-X pins assignment

IES-3162GC User’s Manual
ORing Industrial Networking Corp
14
Pin Number
MDI port
MDI-X port
1
TD+(transmit)
RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive)
TD+(transmit)
4
Not used
Not used
5
Not used
Not used
6
RD-(receive)
TD-(transmit)
7
Not used
Not used
8
Not used
Not used
1000 Base-T MDI/MDI-X pins assignment
Pin Number
MDI port
MDI-X port
1
BI_DA+
BI_DB+
2
BI_DA-
BI_DB-
3
BI_DB+
BI_DA+
4
BI_DC+
BI_DD+
5
BI_DC-
BI_DD-
6
BI_DB-
BI_DA-
7
BI_DD+
BI_DC+
8
BI_DD-
BI_DC-
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
4.2 SFP
The IES-3162GC has fiber optical ports with SFP connectors. The fiber optical ports are in

IES-3162GC User’s Manual
ORing Industrial Networking Corp
15
multi-mode and single-mode with LC connector. Please remember that the TX port of Switch
A should be connected to the RX port of Switch B.
Note. Optical Transceiver shall compliant with 21CFR(J) Laser Class 1.
Switch A Switch B
4.3 Console Cable
IES-3162GC switch can be management by console port. The DB-9 to RJ-45 cable can be
found in the package. You can connect them to PC via a RS-232 cable with DB-9 female
connector and the other end (RJ-45 connector) connects to console port of switch.
PC pin out (male) assignment
RS-232 with DB9 female connector
DB9 to RJ 45
Pin #2 RD
Pin #2 TD
Pin #2
Pin #3 TD
Pin #3 RD
Pin #3
Pin #5 GD
Pin #5 GD
Pin #5
Fiber cord

IES-3162GC User’s Manual
ORing Industrial Networking Corp
16
WEB Management
5.1 Configuration by Web Browser
This section introduces the configuration by Web browser.
5.1.1 About Web-based Management
An embedded HTML web site resides in flash memory on the CPU board. It contains
advanced management features and allows you to manage the switch from anywhere on the
network through a standard web browser such as Microsoft Internet Explorer.
The Web-Based Management function supports Internet Explorer 5.0 or later. It is based
on Java Applets with an aim to reduce network bandwidth consumption, enhance access
speed and present an easy viewing screen.
Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. You need to explicitly modify
the browser setting in order to enable Java Applets to use network ports.
Preparing for Web Management
The default value is as below:
IPAddress: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
System Login
1. Launch the Internet Explorer.
2. Type http:// and the IP address of the switch. Press “Enter”.

IES-3162GC User’s Manual
ORing Industrial Networking Corp
17
3. The login screen appears.
4. Key in the username and password. The default username and password is
“admin”.
5. Click “Enter” or ”OK” button, then the main interface of the Web-based
management appears.
Login screen
Main Interface
Main interface

IES-3162GC User’s Manual
ORing Industrial Networking Corp
18
5.1.2 System Information
System Information interface
System Information
The system information will display the configuration of Basic Setting / Switch Setting page.
Enable Location Alert
When click , PWR1, PWR2 and PWR3 LEDs of the switch will
start to flash together, and click , the LEDs will stop flashing.
5.1.3 Front Panel
Show the panel of IES-3162GC. Click “Close” to close panel on web.

IES-3162GC User’s Manual
ORing Industrial Networking Corp
19
5.1.4 Basic setting
5.1.4.1 Switch Setting
Switch setting interface
The following table describes the labels in this screen.
Label
Description
System Name
Assign the name of switch. The maximum length is 64 bytes
System Description
Display the description of switch.
System Location
Assign the switch physical location. The maximum length is 64
bytes
System Contact
Enter the name of contact person or organization
System OID
Display the switch’s OID information
Firmware Version
Display the switch’s firmware version
Kernel Version
Display the kernel software version
MAC Address
Display the unique hardware address assigned by manufacturer
(default)