Orion Grid Connect SMART User manual

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
SEE & RECORD
ACTIVITY AROUND
YOUR HOME USING
YOUR SMARTPHONE
QUICK
START GUIDE
IMPORTANT!
PLEASE READ THESE
INSTRUCTIONS CAREFULLY
SMART
WIRELESS OUTDOOR
SECURITY CAMERA
SC077HA

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
32
This SMART wireless outdoor security camera is designed for use in homes, apartments,
offices, garages and sheds. It has been developed to be easily set up and operated,
giving you and your family the security and peace of mind that you deserve.
Install the Grid Connect mobile app, available for both iPhone and Android
devices, to monitor your camera remotely.
The Grid Connect app is free to download and is available from the Apple App
Store and Google Play.
1 x Smart Outdoor Security Camera
2 x Weatherproof Silicone Covers*
1 x DC Power Adaptor
1 x Mounting Stand
3 x Mounting Screws & Wall Plugs
1 x Reset Pin
1 x L Shape Screw Driver
2 x Deterrent Stickers
1 x Drill Template
Micro SD Card 16GB Class 10 (Not Included)
* Weatherproof covers must be on to achieve IP65 rating
1INTRODUCTION
2CONTENTS
DOWNLOAD PAIR USE
Download from:
MONITOR FROM ANYWHERE
3IDENTIFICATION
USB Charging Port
Low voltage 5V
Power Button
Press and hold for 5
seconds to turn on/off
the camera
Motion Sensor
PIR motion detection
sensor, detection
range up to 8 meters
Locking Dial
Micro SD Card Slot
Rolling storage micro
SD card (not included,
Max.128GB card
supported)
Camera Lens
1080p HD, with
120° field of view
Speaker/Microphone
Two-way audio
Microphone
Status Light
Reset Button
Press and hold for
5 seconds to reboot
and clear all settings to
factory defaults. This will
allow you to connect with
different Wi-Fi network
if required

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
4DOWNLOAD THE APP
Scan & download
the GRID Connect
App for free
NEW ACCOUNT
LOG IN SETUP
Download and install
GRID CONNECT App
from Play store (Android)
or App store (iOS).
54

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
5INSTALL THE APP
create new account
login to account
Open the GRID CONNECT App.
If you are a new user, tap create new
account and follow the prompts to
complete account setup.
Note: You must agree with the Privacy
Policy to be able to use the App.
If you already have an existing account,
just tap login to account and enter your
login details to continue.
76

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
6.0 PAIRING YOUR DEVICE
Remove the rubber back cover
and insert a 16GB Micro SD card
(not included) into the SD card slot.
(Max. 128GB card support).
Press the power button for 5 seconds
to turn on the camera
*
. You will hear a
welcome sound. Confirm the working
status indicator is red and blinking
(once per second). The camera is
successfully powered on and ready
for pairing.
Once your camera is in pairing mode,
open the GRID CONNECT App, Tap ,
then select security in add device page.
Confirm the status light is red and blinking
(once per second) before tapping ready
to pair to proceed.
*It is recommended to fully charge your battery
before installation. By doing this, plug provided
USB cable into charging port and connect it
with provided adaptor. You will be able to check
battery status after successfully pairing your
camera with Grid Connect App (pg.16).
98

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
6.1 PAIRING YOUR DEVICE
Enter the Wi-Fi password and tap
confirm to proceed.
If needed, you can tap change network
to switch to another suitable Wi-Fi
network for your camera.
confirm
1110

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
6.2 PAIRING YOUR DEVICE
Press continue to scan QR code
using your camera. Hold 15cm
away from your mobile screen.
Press heard the beep after you
hear a sound from your camera
(refer to trouble shooting guide
on page 21 if you don’t hear the
prescribed beep).
The GRID CONNECT App will
start to connect to the camera
automatically as indicated by
the status indicator light blinking
rapidly and then staying solid blue.
scan
QR
code
on screen
1312

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
6.3 PAIRING YOUR DEVICE
Once the pairing process is
complete a page showing device
added successfully will appear.
You may choose to edit the device
name or assign the device to a
dedicated room before tapping
done to finish the pairing process.
Once your camera is paired to your
Wi-Fi network, your camera can
be viewed at anytime from your
smartphone as long as there is
internet access.
If no device is found and the pairing process
is not successful, check below and repeat
from Step 6
1 Wi-Fi network is 2.4GHz.
2 Wi-Fi password entered is correct and
the same Wi-Fi network is used on the
mobile device.
3 GRID device is in pairing mode.
4 Check your Wi-Fi for network activity.
?
1514

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
Once your camera is paired to your Wi-Fi network, you can view your camera
at anytime from your smartphone as long as there is internet access.
Tap to capture a photo/
video during live view.
Note: the photo and
video are saved to the
internal memory of your
smartphone
Tap to capture a photo/
video during playback.
Note: the photo and
video are saved to the
internal memory of your
smartphone
Tap to enable the
talk function
Access live screen
Select a date to
review your playback
from SD card
For more advanced features/functions, refer to
grid-connect.com.au for more details
Access playback
screen
Access to SD
card setting
Enable detection
alerts and adjust
sensitivity of motion
detection
Tap to mute or
hear the sound
Tap to mute or
hear the sound
7OPERATING YOUR CAMERA
Live Screen Playback Screen
Feature Controls Feature Controls
Back to Device
Screen
Switch video quality
between Standard
definition (smoother
movement with
smaller file size)
and High definition
(clearer images but
larger file size)
Access Settings
including share
device, motion
detection
setting, firmware
information,
remove device etc.
Switch to full
screen display
for live view
Check battery
status
Slide forward/back
video playback on
time slider
Pause video
playback
1716

24 pages 105mm x 148mm (A6) 160gsm Gloss Art Stock 4 colour process double sided - CPIN005105
1918
8INSTALLATION
PREPARATION
Pair your camera inside the house before installation. Before choosing your preferred
location, check the Wi-Fi strength/coverage to ensure the camera is fully functional.
Note: For ceiling/under eave, ensure you navigate to settings > basic function
settings > flip screen to obtain correct orientation.
CHARGING DEVICE
1. After pairing the camera, fully charge the battery before first use. Plug DC power
adaptor into a power source and connect it with camera using provided USB cable.
2. Check battery status through the APP. When it reaches 100% remove the charging cable.
UNDER EAVE MOUNT
The camera can be mounted using the screws and wall plugs provided.
1. Use the mounting base or provided drill template to mark the screw positions
under your eave. Take into consideration where you’ll have the best view.
Drill holes into the eave and push wall plugs into the holes.
2. Simply put the weatherproof silicone cover onto the camera body.
3. Use the screws to secure the camera in place.
Wall Plugs
Mounting Base
Mounting Screws
Collar Lock