2 IM0973171 A 01
Installation Manual
Camera PT TIC Alu/SSt
Article no. 0506982; Camera PT TIC PAL/NTSC SSt
Article no. 0506972; Camera PT TIC PAL/NTSC Alu
Safety
In order to guarantee safe operation, these safety instruc-
tions must be read before you start using this equipment.
• Do not open the enclosure. The camera and the P&T enclosure are
pressurised. This can cause damage, short-circuiting or electrical
shocks.
• Do not expose the equipment to extreme temperatures. This can cause
deformation of the enclosure or damage to internal components.
• Repairs or adjustments to the equipment may only be undertaken by
Orlaco.
• The equipment must be assembled as shown in this manual.
• If there have been alterations or changes to this equipment that have
not been specifically approved by Orlaco, use of this equipment is not
permitted.
Statement related to Machine-directive 2006/42/EC:
Orlaco, under it’s role as manufacturers product-responsibility has
studied the impact of the Machine Directive onto the design of this
Pan/Tilt unit. We can make the following statement:
There is no risk that we aware of in the PTZ that is in conflict with the
Machine Directive and this device is safe to use under 2006/42/EC
machinery directive. :
2 safety measurements are in place to comply to the rules set out in the
directive:
1. Holes that are big enough to allow bodyparts in (see directive
for definition) are designed in a way that they cannot and will not
pinch the body-parts in normal operation of the PTZ as described
in this manual.
2. In the rare occasion that the device is hitting or pinching a
mechanical part or bodypart the electronics and integrated
sensors makes sure the stepping motors are stopped
automatically to prevent any damage similar to the way car
windows are functioning.
Before you start using this equipment, please read this manual carefully
and follow all instructions. This installation manual describes the func-
tions of the equipment, outlines the connection options and explains how
to put the equipment into operation. We recommend that you keep this
manual in a safe place for reference purposes.
If you have any questions or issues concerning the operation of this
equipment, consult the relevant section in the manual or contact the
Orlaco Products BV Service department.
The camera and monitor systems from Orlaco comply with the latest CE,
ADR, EMC and mirror-directive regulations. All products are manufac-
tured in accordance with the ISO 9001 quality management, ISO/TS16949
quality automotive and ISO 14001 environmental management.
Contents Page
1. Introduction 3
2. Configuration 3
3. Mounting 3
3.1. Mounting safety cables 3
4. Operation 3
4.1 Overpressure in the enclosure 3
4.2 Switching on and off 3
5. Electrical installation 4
5.1. Pan & Tilt (PT TIC) cable specifications 4
5.2. Example configuration 4
6. Instructions for use 5
7. Troubleshooting 5
8. Maintenance and cleaning 6
9. Product specifications 6
9.1 Thermal Image Camera 6
9.2 Pan & Tilt 6
9.3 General 6
10. Dimensions 7
11. Visca protocols 8
11.1 Orlaco Pan/Tilt command set 8
11.2 Old Pan/Tilt commands 8
11.3 New pan/Tilt commands 8
12. Generic Serial commands 8
13. Pan/Tilt serial commands 8
13.1 Old Pan/Tilt commands 9
13.2 New pan/Tilt commands 9
14. Additional zoom/serial commands 10
15. Additional TIC Camera serial commands 11
16. Disposal 11
17. General terms and conditions 11
18. Release notes 11
Available documentation
DS0506972 Camera PT TIC Alu
DS0506982 Camera PT TIC SSt
UM0972080 Monitor 7" RLED/LEDD
