Orlaco RLED CAN RB 4D CS User manual

Display 7" RLED CAN RB 4D CS
User manual
Manual No. UM0972011 A 01
08/2019
English
Art. no.: 0208930

UM0972011 A 01
2
User Manual
ORLACO Display 7” RLED CAN RB 4D CS
Manual No. IM0972011, A 01
Contents Page
1. Quick Reference 4
2. Getting Started 6
3. Keyboard 7
4. Service menu 10
5. Operator menu 16
6. System overview 18
7. Overview of menus 20
8. Version details 21
Introduction
Check with Orlaco which language versions are available. This
manual contains user instructions. Used photographs and
illustrations give general information and may differ from the
products you use.
Contact your Orlaco dealer if you have questions, additional
information, or want to make changes that are not described in this
manual.
All data subject to change without notice. All dimensions are for
commercial purpose only. The camera/display systems from
Orlaco comply with the latest CE, ADR, EMC and mirror-directive
regulations, where applicable. All products are manufactured in
accordance with the ISO 9001 quality management system, IATF
16949 quality automotive, ISO 14001 environmental management
systems, where applicable.
See Installation Manual IM0973021 for installation.
Contents/Introduction

UM0972011 A 01 3
Article number 0208930
ORLACO Display 7” RLED CAN RB 4D CS
Used abbreviations
ABC = Auto Backlight Control
AFZ = Auto Focus Zoom
AGC = Automatic Gain Control
BHO = Black Hot
CCC = Compact Color Camera
LUT = Look Up Table
DDE = Digital Detail Enhancement
FCC = Flat Field Correction
FUS = Fusion
I&F = Ice and Fire
NTS = NTSC
OSD = On Screen Display
PTZ = Pan & Tilt Zoom
RB = Rainbow
Stndrd = Std = Standard
TCH = Tachometer
TIC = Thermal Image Camera
WHO = White Hot
ZOO = Zoom

UM0972011 A 01
4
1. Quick Reference
Button 2
Auto backlight
control
day/night
modes
Button 3
Contrast
Button 4
Brightness
Button 5
Option/previ-
ous menu
Button 6
Minus -
select/setting
Button 7
Plus +
select/setting
Button 8
Enter /
standby
Button 1
Camera
selection
Button 1, camera selection
Press the camera selection button once. The camera LED flashes to indicate that
manual camera selection is enabled. Use the minus and plus buttons to select the
camera. Press the button again to disable manual camera selection.
Button 2, auto backlight control day/night settings
Press this button to switch between the auto backlight day and night settings.
Button 3, setting the contrast
Press the button once in order to enable the setting mode. Use the minus and plus
buttons to set the required contrast. Press the button again to disable the setting
mode.
Button 4, setting the brightness
Press the brightness button once in order to enable the setting mode. Set the required
brightness using the minus and plus buttons. Press the button again to disable the
setting mode.
Keyboard
Below is a brief description of the button functions. See sections 3 and 4 for a more detailed explanation.
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7

UM0972011 A 01 5
Buttons 3 and 4, setting color saturation
Press the contrast (3) and brightness (4) buttons simultaneously to enable
the setting mode. Set the required color saturation using the minus and plus
buttons. This setting must be set separately for each camera.
Button 5, option/previous menu
Return to the previous menu.
Button 6, minus
Go to the next menu option or move left.
Button 7, plus
Go to the previous menu option or move right.
Button 8, enter
Switch to Standby or in the menus, select or activate the chosen option.
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 8
Button 7
Button 3 + 4

UM0972011 A 01
6
objects in
monitor are
closer than
they appear
C3
C2
C1
2.1. Disclaimer
When switching on the monitor for the first time, a disclaimer ap-
pears in English for 5 seconds (see Figure 1).
Displayed text: Do not operate display functions during safety criti-
cal operations. Objects in the monitor are closer than they appear. If
a different language is subsequently set, the disclaimer text appears
in the set language.
2.2. Description of the keyboard
Button no. 1 = Camera selection
Button no. 2 = Auto LCD backlight control day/night settings
Button no. 3 = Contrast
Button no. 4 = Brightness
Button no. 5 = Option/previous menu
Button no. 6 = Minus selection/setting button (-)
Button no. 7 = Plus selection/setting button (+)
Button no. 8 = Enter/Standby
2.3. Language setting for the OSD (On Screen Display) menu
The OSD menu language is set as English by default. If you would
like to operate the OSD menu in a different language, open the ser-
vice menu → system settings. See section 4 on page 13. The OSD
menu is available in English, Dutch, German, French, Italian, Czech,
Polish, Portuguese, Spanish, Turkish, Swedish, Finnish, Danish and
Norwegian.
Figure 1
Buttons 1 2 3 4 5 6 7 8
2. Getting started

UM0972011 A 01 7
objects in
monitor are
closer than
they appear
C3
C2
C1
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
3. Keyboard
3.1. Button 1, camera selection
Press the camera selection button (1) once (see Figure 2). The
camera LED flashes to indicate that manual camera selection is
enabled (see Figure 3). Press the button again to disable manual
camera selection.
Use the minus and plus buttons to select the desired camera.
The other buttons (3 = contrast, 4 = brightness and 3+4 = satura-
tion) can also be used and these functions can be adjusted with the
minus and plus buttons. Disable these functions by reselecting a
camera with the minus and plus buttons.
Manual camera selection has priority over the scan function and the
automatic camera selection. The button function can be disabled
in the service menu via the option 'system settings →keyboard →
keyboard lock'. See system settings for more information (section
4.3. on page 13).
3.2. Button 2, auto LCD backlight control day/night settings
See figure 4.
For a compact camera, press this button to switch between:
• The ABC mode
• The LCD backlight day setting
• The LCD backlight night setting
TIC and AFZ cameras are exceptions. For these, pressing button 2
makes other functions available (see sections 3.8.1. and 3.8.2. on
page 9).
The ABC mode controls the backlight between a minimum (adjust-
able; see also under service menu on page 16) and a maximum
level depending on the intensity of the ambient light. A light sensor
on the keyboard measures the ambient light (see Figure 6).
In the day and night mode the brightness of the backlight can be
manually set using the minus and plus buttons (the settings are
saved). These settings are not camera dependent and therefore ap-
ply for all cameras (see Figure 5).
Figure 6
Buttons 1 2 3 4 5 6 7 8
Figure 2
Figure 3
Figure 4
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Figure 5

UM0972011 A 01
8
objects in
monitor are
closer than
they appear
C3
C2
C1
3.3. Button 3, setting the contrast
Press the contrast button (3) once to enable the setting mode (see
Figure 7). Use the minus and plus buttons to set the required con-
trast. This setting must be set separately for each camera.
3.4. Button 4, setting the brightness
Press the brightness button (4) once to enable the setting mode
(see Figure 8). Set the required brightness using the minus and
plus buttons. This setting must be set separately for each camera.
3.5. Buttons 3 and 4, setting color saturation
Press the contrast (3) and brightness (4) buttons simultaneously to
enable the setting mode.
Set the required color saturation using the minus and plus buttons.
This setting must be set separately for each camera.
3.6. Locking buttons 2, 3 and 4
These buttons can be locked in the service menu (section 4.3.3.
keyboard, see page 13).
3.7. Button 5, option button
•Single scan sequence
If the option button (5) is pressed and a CCC is selected (see
camera settings on page 10), then the LEDD display generates a
single scan (not continuous) of multiple connected cameras in a
sequence (using the set time interval. The scan time must only
be set if the main scan is started and then stopped again). See
page 15, scanning.
• Connection with an AFI/AFZoom camera
This option enables the zoom function (indicated by the illumi-
nated button). The zoom factor can be changed using the plus
and minus buttons.
•Connection with a TIC camera
Zoom factors for a TIC camera are: 1x (standard display), 2x and
4x. When zooming out to 1x, the pan/tilt function is set at the
starting point.
•Connection with a PTZ camera
If pan/tilt is enabled and the option button (button 5) is pressed
several times, then the ZOOM, PAN, TILT sequence is run
through (see Figure 10). The minus and plus buttons are used to
activate the ZOOM, PAN or TILT movement (PAN and TILT for a
TIC camera only work if the digital zoom is 2x or 4x).
The TIC camera video standard and spot meter settings are only ac-
cessible via the camera menus. There are no keys for direct access
to these settings.
See page 10, section 4: service menu, camera settings.
3. Keyboard
Figure 8
Figure 9
Figure 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Buttons 1 2 3 4 5 6 7 8

UM0972011 A 01 9
3. Keyboard
Figure 10
Figure 12
Figure 11
3.8. Quick settings
When in normal image mode, the following quick settings are avail-
able as shortcuts:
3.8.1. TIC camera
When a TIC camera is selected and button 2 (Figure 12) is pressed,
then Color LUT and DDE quick settings are enabled (indicated by
illuminated button 2). Using the minus button (button 6), the Color
LUT settings (WHO, BHO, FUS, RB, I&F) can be selected (see
Figure 11). Using the plus button (button 7), the DDE settings (OFF,
LOW, MED, HI) can be selected.
If button 2 (Figure 12) is pressed for more than 3 seconds, then the
TIC camera performs a FFC (Flat Field Correction) cycle.
3.8.2. AFZ camera
If an AFZ camera is selected and button 2 is pressed (Figure 12),
then the zero lux and backlight functions of the AFZ camera are
enabled/disabled.
3.8.3. CCC camera
If a CCC is selected, then pressing button 2 (Figure 12) switches
between all backlight settings for the entire system (DAY, NIGHT,
ABC). See section 3.2.
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7

UM0972011 A 01
10
objects in
monitor are
closer than
they appear
C3
C2
C1
Figure 13
Figure 16
Figure 14
Figure 15
4. Service menu
4. Using the service menu
To open the service menu, simultaneously press the camera selection
button (1), the minus button (6) and the plus button (7) (see Figure
13). The display (see Figure 14) will appear. The following buttons are
used to navigate through the menus:
5 - Option/previous menu: Return to the previous menu
6 - Minus: Go to the next menu option
7 - Plus: Go to the previous menu option
8 - Enter: Select or enable the chosen option
4.1. Camera settings
Select camera settings. Press enter to open the 'Camera settings' menu.
Use the minus (6) and plus (7) buttons to select which camera to configure.
Then confirm this selection by pressing the enter button (8). The yellow
cursor is now activated in the list of items. Use the minus (6) and plus
(7) buttons to select the item to adjust and then confirm this selection by
pressing the enter button. If the selection is an on/off switch, you can choose
between on and off. If the selection is a number, you can change the value
using the minus (6) and plus (7) buttons. Save the new settings by pressing
the enter button (8).
4.1.1. Mirror
Enable this option to reverse the image (left/right).
4.1.2. Upside down
This option flips the image (upside down).
4.1.3. Switch delay
Enable this option if the switchwire is controlled by an intermittent
signal (e.g. from an indicator light).
4.1.4. Horizontal line mark
Enable this option to show a reference line. The reference line is
displayed as a horizontal green line. See Figure 40 on page 17.
4.1.5. Line position
Adjusts the vertical height of the reference line. 0 corresponds to the
top edge of the monitor and 100 to the bottom edge.
4.1.6. Vertical line mark
Enable this option to show a reference line. The reference line is
displayed as a vertical green line. This option is not available on all
RLED/LEDD models. See Figure 40 on page 17.
4.1.7. Line position
Adjusts the vertical position of the reference line. This can be set
between 38 and 63. The left and right sides swap position depending
on the settings of the camera mirror-image function.
4.1.8. Graticule
This option shows a graticule for a rearview camera on the monitor.
See Figure 40 on page 17.
Buttons 1 2 3 4 5 6 7 8
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7

UM0972011 A 01 11
4.1.9. Cinema mode
The camera image is displayed in widescreen when this option is
enabled.
4.1.10. Camera type
Select the camera type that is connected. The special features of that
camera type will then become available. The camera types that can be
selected are:
AFZ: Enable this option if an AFI/AF zoom camera is connected. If
AFZ is selected, the backlight, zero lux and stabilizer options are
enabled.
Operation of the zoom function:
Button 5 - Enable the zoom function. The zoom function is disa-
bled if the button is pressed again.
Button 6 - Zoom out.
Button 7 - Zoom in.
TIC: Enable this option if a Thermal Image Camera (TIC) is con-
nected. If TIC is selected, then the video standard, color LUT, TIC
DDE and spot meter options are enabled.
CCC: Enable this option if a Compact Color Camera (CCC) is con-
nected.
4.1.11. Video stndrd
Video standard: The camera type must be set to TIC. Select the
standard video output for the camera: PAL or NTSC (NTS).
4.1.12. Backlight
This option corrects the background light in order to improve the
screen display of dark objects in bright/lit surroundings. This option
is only available if an AFZ camera is connected to a serial 7" RLED/
LEDD display. For direct button operation: Button 2.
4.1.13. Zero lux
Enable this option to improve the light sensitivity of the camera in
dark surroundings. This option is only available if an AFZ camera is
connected to a serial 7"
RLED/LEDD display.
4.1.14. Stabilizer
This option enables the stabilizer function, if the camera has one. This
option is only available if an AFZ camera is connected to a serial 7"
RLED/LEDD display.
4.1.15. Color LUT (look up table)
The camera type must be set to TIC. Select the color palette to be
used to give the correct color temperature. Select from WHO (white
hot), BHO (black hot), FUS (mixed), RB (rainbow) and I&F (ice and
fire). The AGC (automatic gain control) is automatically set for the
WHO, BHO, FUS and RB settings.
4.1.16. TIC DDE (TIC digital detail enhancement)
Possible settings are: OFF, LOW, MED and HI. Select the desired
degree of image enhancement.
Figure 17
Figure 18
4. Service menu
Depending on the choice of
camera type (see Figure 17),
the settings marked in blue will
or will not be available.

UM0972011 A 01
12
Figure 21
4.1.17. Spot meter
Only works if TIC is selected as the camera type (see section 4.1.10.
on page 11):
OFF (spot meter off)
B C (bar in Celsius)
B F (bar in Fahrenheit)
N C (number in Celsius)
N F (number in Fahrenheit)
BNC (bar + number in Celsius)
BNF (bar + number in Fahrenheit)
4.1.18. Pan/tilt
Enabling the pan/tilt function makes standard pan and tilt operation
possible (option button = button 5). It is possible to use digital pan/
tilt when the TIC image is zoomed 2x or 4x.
4.1.19. Brightness
The setting for the brightness of the monitor. For direct button opera-
tion: Button 4.
4.1.20. Contrast
The setting for contrast on the monitor. For direct button operation:
Button 3.
4.1.21. Saturation
The color saturation setting for the camera image. For direct button
operation: Buttons 3+4.
4.2. Camera tags
See Figure 20. In this menu, names can be given to the camera
inputs. See Figure 21.
The number of inputs depends on the video switch type that is set
(see section 4.3.8. on page 15).
4. Service menu
Figure 19
Figure 20

UM0972011 A 01 13
Figure 26
Figure 25
Figure 22
Figure 23
Figure 24
4.3. System settings (see Figure 22)
4.3.1. Language
See Figure 23. This option opens the language selection menu. The
selected language will be used for all OSD menus. The OSD menu is
available in English, Dutch, German, French, Czech, Italian, Pol-
ish, Portuguese, Spanish, Turkish, Swedish, Finnish, Danish and
Norwegian.
4.3.2. On Screen Display (OSD)
This option opens the OSD settings menu. See Figures 24 + 25. The
following can be set in this menu:
OSD time-out
Sets the time (in seconds) that the OSD (camera number/name,
top left) appears on the monitor. Select 'Off' to disable this and
'On' to have this permanently enabled.
Position of the OSD
This option is used to set the horizontal position of the OSD menu
text.
Info transparency
Changes the transparency of the camera tag, etc.
Menu transparency
Changes the transparency of the system menu.
Disclaimer transparency
Changes the transparency of the disclaimer when starting up.
OSD menu help
This function enables or disables the automatic text messages of
the OSD help menus. If enabled, help messages automatically ap-
pear in all menus after 10 seconds of inactivity.
4.3.3. Keyboard
This option opens the keyboard menu. See Figure 26. This menu has
the following 3 options:
Keyboard lock
This option opens the settings menu for the keyboard lock. It is
possible to lock various functions in order to prevent any unwanted
changes. See Figure 27.
The keyboard sound and beeper volume functions are not avail-
able on all Orlaco displays.
Figure 27
4. Service menu

UM0972011 A 01
14
Figure 30
4.3.4. Power settings
See Figure 28. This menu has the following 2 options:
Standby mode
There are three available choices — use the minus and
plus buttons to select the various functions.
MNU = With this setting you access the operator
menu via the enter button (8). Select the required
setting.
IMM = Immediate standby
2S = Standby after a delay of 2 seconds
Standby, camera off
If this option is enabled, the camera power is off during standby.
4.3.5. CAN bus
See Figure 29. This option opens the CAN bus menu. This menu has
the following 4 options:
CAN protocol
This option selects the signal, or CAN protocol, that the display
uses. By default this is Orlaco CAN protocol 1. For the Orlaco Radar
system, Orlaco CAN protocol 6 must be set. Other protocols are
customer-specific. The CAN speed is automatically adjusted, but it
can also be set manually once the protocol has been selected.
CAN speed
This option selects the bit rate of the CAN bus. Available options
are: 100, 125, 200, 250, 500 and 1000 kbit.
Main terminator
Enable/disable the 120 Ω terminator (CAN or RS485) between Rx
and Tx.
AUX terminator
Enable/disable the 120 Ω terminator (CAN or RS485) between
AUX1 and AUX2.
4.3.6. LCD backlight
This option opens the backlight submenu for the 7" RLED/LEDD
display. See Figure 30. This menu has the following 4 options:
LCD backlight mode
This option enables automatic backlight control (ABC). The
display automatically adapts its brightness to the ambient light.
Metering sensor on the keyboard. If required, a specific day or
night brightness can be manually set.
ABC minimum level
This setting determines the minimum brightness the ABC can use
when there is low ambient light.
LCD backlight day
This option allows the day brightness setting to be manually
adjusted (50–100%).
LCD backlight night
This option allows the night brightness setting to be manually
adjusted (0–50%).
Figure 28
Figure 29
4. Service menu

UM0972011 A 01 15
4.3.7. Scanning
This option opens the camera scanning submenu. See Figure 31.
This menu has the following options:
Scan sequence
This option selects the cameras from which images
are to be shown in sequence.
Scan interval
This option selects how long a camera image is displayed.
4.3.8. Camera switch
This option configures the type of video
switch that is used. See Figure 32.
'OFF' if no camera switch is used →
1 camera system.
'3C' for an external
camera switch → 3 camera system.
'2C' if a 2–4 camera cable is used →
2 camera system.
'4C' if a combination of internal and external switches and a 2–4
camera cable are used → 4 camera system.
'QUA' for a quad system, only in combination with the quad
switch.
4.3.9. Front camera
See Frontcam manual 0993850. This option opens the front camera
submenu for the 7" RLED display. This enables the front camera
functionality (a statutory obligation).
4.3.10. Default settings
This option opens the menu to restore the factory default settings.
Select the number of the factory settings that you require (1 =
default Orlaco settings). You can choose between 16 sets of default
settings. Contact ORLACO for further information. Select the option
'Restore defaults' to restore the factory settings.
Warning:
All user settings are lost when the factory defaults are restored!
4.3.11. External device conguration
This option opens the configuration menu for an external device.
Only use this option if a device is connected that has its own OSD
(Multiview, Spectrum Scanner, etc.). Exit the menu by pressing the
option button (5) for 3 seconds.
4.4. Info
This user manual describes the functions of the software version
indicated on this display (see Figure 35).
Figure 31
Figure 32
Figure 33
Figure 34
Figure 35
4. Service menu

UM0972011 A 01
16
objects in
monitor are
closer than
they appear
C3
C2
C1
5. Using the operator menu
The operator menu is not available by default due to the keyboard lock.
To disable the lock, refer to system settings on page 13.
Press the minus and plus buttons simultaneously to open the operator
menu. The following buttons are used for navigation:
5 - Option/previous menu:
Return to the previous menu
6 - Minus:
Go to the next menu option
7 - Plus:
Go to the previous menu option
8 - Enter:
Select or enable the chosen option
The following settings can be adjusted (see Figure 37):
Language
Camera settings
Set video channel
5.1. Language
This option opens the language selection menu (see Figure 38).
The selected language will be used for all OSD (On Screen Display)
menus. The OSD menu is available in English, Dutch, German,
French, Czech, Italian, Polish, Portuguese, Spanish, Turkish, Swedish,
Finnish, Danish and Norwegian.
5.2. Camera settings (see Figure 39)
Horizontal line mark
Enable this option to show a reference line. The reference line is
displayed as a horizontal green line. See Figure 40.
Line position
Adjusts the vertical height of the reference line. 0 corresponds to
the top edge of the monitor and 100 to the bottom edge.
Vertical line mark
Enable this option to show a reference line. The reference line is
displayed as a vertical green line. This option is not available on all
RLED/LEDD models. See Figure 40.
Line position
Adjusts the vertical position of the reference line. This can be set
between 38 and 63. The left and right sides swap position depend-
ing on the settings of the camera mirror-image function.
Graticule
This option shows a graticule for a rearview camera on the monitor.
See Figure 40.
Figure 36
Figure 38
Figure 37
Button 1
Button 1
Button 1
Button 2
Button 3
Button 4
Button 5
Buttons 6 + 7
Buttons 5,6,7,8
Buttons 6 + 7
Figure 39
5. Operator menu
Buttons 1 2 3 4 5 6 7 8

UM0972011 A 01 17
5. Operator menu
Horizontal
Vertical Horizontal and vertical
Graticule
Figure 40
5.3. Video channel settings
See Figure 41.
This option sets the video channel for the Orlaco Spectrum Scanner
(see Figure 42).
The following options are available:
CH0 = channel 0 to CH7 = channel 7
AUT = automatic
See the Spectrum Scanner IM0004060 installation manual for
descriptions of these channels.
Figure 41
Figure 42

UM0972011 A 01
18
2-4 camera cable
power
RLED/LEDD
power
RLED Serial
2 camera system
With Y-split cable
1 camera system
6. System overview

UM0972011 A 01 19
2-4 camera cable
RLED/LEDD
Switcher
power
4 camera system
With Y-split cable
6. System overview

UM0972011 A 01
20
7. Overview of menus
Standby menu
Enter
Service menu
Camera- + Minus- and Plus buttons
Standby menu
Standby
Info
Operator menu
Language
Camera settings
Set video channel
English, Dutch,
Horizontal Marker, Marker position, Vertical Marker, Marker position, Graticule
CH0, CH1, CH2, CH3, CH4, CH5, CH6, CH7, AUT
1, 2, 3
Service menu
Camera settings
Camera tags
System settings
Info
Mirror, Upside down, Switch delay, Hor. Marker, Marker position, Vert. Marker, Marker position, Graticule, Cinema mode, Camera
type, Video standard, Backlight, Nul Lux, Stabilizer, Color LUT, TIC DDE, Spot meter, Pan/Tilt, Brightness, Contrast, Saturation
System settings
Language
On screen display
Keyboard
Power settings
CAN-bus
LCD-Backlight
Scanning
Camera switch
Frontcam
Default settings
Ext. device config
ON, OFF, 30sec, 10sec, 3sec
19 positions
29 positions
29 positions
29 positions
ON/OFF
ON/OFF
1M, 500, 250, 200, 125, 100
ON/OFF
QUA, 4c, 2c, 3c, OFF
On screen display
OSD timeout
OSD position
Info transparency
Menu transparency
Disclaimer transp.
OSD menu help
Keyboard
Keyboard lock
Keyboard sound
Beeper volume
Power settings
Standby mode
Standby camera off
CAN-bus
CAN-protocol
CAN-speed
Main terminator
AUX terminator
OFF, K+A, ALM, KEY
IMM, MNU, 2sec
OFF, 1-6 positions
ON/OFF
ON/OFF
0-50
2s, 5s, 10s
ON/OFF
ABC, NIT, DAY
OFF, 1-2, 1-2-3
0-100 positions
ON/OFF
50-100
ON/OFF
ON/OFF
0-50
Keyboard lock
Standby menu
Operator menu
Camera switch
Camera settings
Standby
LCD-backlight
LCD-backlight mode
ABC Minimum level
LCD-backlight day
LCD-backlight night
Scanning
Scan sequence
Scan interval
Operator menu
Minus- and Plus buttons
ON/OFF
OFF 1c, 2c, 3c
1-21
0-100
TCH, ZOO, ON
Frontcam
Enable Frontcam
Invert handbrake
Pulses per meter
AUX wire function
Default settings
Select default
Restore defaults
English, Dutch, German, French, Czech, Italian, Polish,
Portuguese, Spanish, Turkish, Swedish, Finnish, Danish, Norwegian.
Display is on but there is no picture
Software information
The operator menu is not available by default due to the keyboard lock.
German, French, Czech, Italian, Polish, Portuguese, Spanish, Turkish, Swedish, Finnish, Danish, Norwegian.