Osmond Ergonomics AXIA OFFICE User manual

AXIA OFFICE, AXIA MAX & AXIA PLUS - INSTRUCTIONS
1. SEAT HEIGHT
2. BACK ANGLE
3. SEAT TILT &
FREE FLOAT ACTIVATION
Lift the middle lever on the right or
left-hand side and take your weight
off the seat to raise the height.
Remain seated to lower the height.
Release the lever to lock the seat
height.
Lift the back lever on the right or left
hand side and take your weight off
the back to bring it forward. Lean
back to move it backwards. Release
the lever to lock the back angle.
Lift the front lever on the right or
left-hand side to release the seat tilt
lock. Tilt the seat while seated.
Release the lever to lock the seat
tilt. Or push down the front lever to
activate the seat rock. Lift the lever
back up to lock the seat in any
position.
4. FREE FLOAT TENSION
5. BACK HEIGHT
(AXIA OFFICE ONLY)
6. LUMBAR SUPPORT
(MAX ONLY)
Twist the knob on the underside of
the chair while in free float mode to
adjust the tension of the rocking
motion. Clockwise increases the
tension, anticlockwise reduces the
tension.
Pull out the lever on the middle of the
back to release the back height lock,
then raise or lower the back. Push the
lever back in to lock the back height.
Turn the knob on the right-hand side
of the back to adjust the lumbar
support. Clockwise increases lumbar
support, anti-clockwise decreases
lumbar support.

7. SEAT DEPTH
8. ARM REST HEIGHT
9. ARM REST PIVOT
Ensure the seat is tilted fully
forward. Pull out either the left or
right lever at the back corner of the
seat and slide the seat backward or
forward. Release the lever to lock
the seat depth.
Push in and hold the button on the
underside of the arm to release the
arm height lock. Raise or lower the
arm. Release the button to lock the
arm height. Repeat for the other
arm.
Rotate the arm until it locks at the
desired position. Repeat for the
other arm
10. ARM REST WIDTH
Loosen the screw at the base of the
arm to loosen the arm width lock.
Slide the whole arm in or out. Tighten
the screw back again to lock the arm.
Repeat for the other arm.
11. NECKREST
Rotate the cushion up or down for
varying support.
12a. NECKREST (PLUS ONLY)
Lift the headrest post
up to raise the
height or push it
down to lower the
height. The post will
click securely into
position.
12b. NECKREST (MAX ONLY)
Push in and hold the
button on the
left-hand side of the
back rest to move
the neck rest
forward. Hold the
button in and push
the neck rest back to
move it backward.