Osmond Ergonomics SOLARI 3 User manual

SOLARI 3 - INSTRUCTIONS
1.
SEAT HEIGHT
2. BACK ANGLE
3. BACK HEIGHT ADJUSTMENT
Lift the front lever on the right-hand
side and take your weight off the
seat to raise the height. Remain
seated to lower the height. Release
the lever to lock the seat height.
Lift the back lever on the right-hand
side and take your weight off the
back to bring it forward. Apply more
weight to the back to move it
backwards. Push the lever back
down to lock the back angle.
First, raise the back to its highest
setting, and then lower it to its
lowest setting. Then lift the back
one click at a time (8 clicks
maximum) to the desired position.
4. LUMBAR SUPPORT
5. SEAT DEPTH
6. SEAT ANGLE ADJUSTMENT
Squeeze the bulb repeatedly to inflate
the lumbar support. Press the button
on the bulb to deflate the lumbar
support.
Lift the front lever on the left-hand
side and slide the seat backwards or
forwards. Release the lever to lock the
seat depth.
Lift the middle lever on the right-hand
side to release the seat tilt lock.
Tilt the seat while seated. Push the
lever back down to lock the seat tilt.

7. SEAT ROCK TENSION
8. ARM REST HEIGHT
9. ARM REST WIDTH
Twist the knob on the underside of
the chair while in seat angle
adjustment mode to adjust the
tension of the movement.
Lift the button up on the arm post to
release the arm height lock. Raise or
lower the arm. Release the button to
lock the arm height.
Push and hold the button in to
release the width adjustment lock.
Whilst pushed in, manoeuvre the top
of the arm rest out, increasing
width. Reverse the operation to
decrease width of the arm rest.