OTC 6043 User manual

Cooling System
Power Flush Gun
Instruction Manual
for Part No. 6043
QUESTIONS?
800-533-6127
otctools.com
Form No. SP04500423
Rev. A
655 EISENHOWER DRIVE
OWATONNA, MN 55060 USA
PHONE: [phone]
TECH. SERV.: [phone]
FAX: [phone]
ORDER ENTRY: [phone]
FAX: [phone]
INTERNATIONAL SALES:
[phone]
FAX: [phone]

2
Cooling System Power Flush Gun
Instruction Manual
•
Failure to read and follow instructions and safety
precautions in this manual may result in personal injury
and/or damage to the tool.
•
Wear eye protection that meets ANSI Z87.1,
CE EN166, AS/NZS 1337, and OSHA standards.
•Keep water spray away from electric wiring or fatal
electric shock may result.
•Never point the gun at anyone else or any part of
your body.
•Do not leave gun under pressure and unattended at
any time.
•Do not alter Power Flush Gun in any manner.
•Ensure waste coolant is recovered and disposed of
in accordance with local environmental regulations.
Safety Precautions
WARNING: To prevent personal injury and/ or equipment damage,
Explanation of Safety Signal Words
The safety signal word designates the degree or level of hazard seriousness.
DANGER:Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING:Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION:Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION:Used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.

3
Cooling System Power Flush Gun
Instruction Manual
Tool Setup
Water Supply
Air Supply

655 EISENHOWER DRIVE
OWATONNA, MN 55060 USA
PHONE: [phone]
TECH. SERV.: [phone]
FAX: [phone]
ORDER ENTRY: [phone]
FAX: [phone]
INTERNATIONAL SALES:
[phone]
FAX: [phone]