oticon Phone 2.0 User manual

INSTRUCTIONS for use Phone 2.0

Contents
Using the Connectline phone adapter 4
Streamer Pro versus Streamer 5
Incoming calls 6
Outgoing call 10
Additional information 13
122272UK / 09.12 122272UK / 09.12

4 5
Pairing
Answer
Streamer Pro Streamer
Using the Connectline phone adapter
The phone solution supports both incoming and outgoing phone calls. During a phone
call the hearing instruments are used as headsets and the microphone on body worn
Streamer enables hands free operation.
First, make sure that the phone adapter is correctly installed as described in the
installation guide. This guide explains how the Streamer is used for phone conversations.
To use the phone adapter, the Streamer and phone adapter must be wirelessly connected
to each other. This connection is established automatically when the Streamer and
phone adapter is paired and in range, see Range (page 13). The phone adapter is connected
to the Streamer when the power indicator on the phone adapter is steady blue.
Streamer Pro versus Streamer
The below drawing shows the main differences between the Streamer and the new
Streamer Pro. For more information please refer to: www.oticon.com/connectline

6 7
Incoming calls
How to answer and end a call
Make sure that you are able to speak into the Streamer’s microphone inlet.
When your landline home phone rings, you will hear an incoming call alert in your hearing
instruments. The phone indicator on the phone adapter will blink green and at the same
time the phone button on the Streamer and the status indicator will blink green.
Press the phone button on the Streamer shortly (A) to answer the call. You will hear a
small confirmation beep in your hearing instruments. The phone button and status
indicator on the Streamer and the phone indicator on the phone adapter will now be
steady green.
To end the call, simply press the phone button on the Streamer shortly and the green
phone button on the Streamer turns off.
Microphone
A

8
Receiving a call
Streamer Pro
top status
Streamer Pro
front
Phone
adapter
Description
Streamer and phone adapter connected
Phone ringing: Phone indicator and Streamer
Pro top status blinks green. You will hear an
incoming call indicator in your instruments.
When the call is connected, you wil hear a beep
acknowledging that the call is answered – you
are now able to listen and talk to the other
party.
Steady Blinking

10 11
Outgoing call
How to make a call
Make sure that you are able to speak into the Streamer’s microphone inlet.
1. To make a call press the Streamer’s phone button shortly (A). The hook is now off
and you will hear a dial tone in the hearing instruments. The phone button on the
Streamer and phone indicator on the phone adaptor will turn steady green.
2. Pick up the handset on your landline home phone (or press Call on the portable phone)
and dial the phone number (B) as you normally do to make a call.
3. After a short while you will hear the call tone in your hearing instruments indicating
that the call is now connected through your Streamer and hearing instruments.
You can now put the handset back on (or press “end call” on the portable phone).
To end the call, simply press the phone button on the Streamer shortly.
* Note: Make sure to put the handset correctly back on the phone – otherwise the phone line will block for incoming calls.
Microphone
A
B

12 13
Making a call
Streamer Pro
top status
Streamer Pro
front
Phone
adapter
Description
Streamer and phone adapter is connected
Press the Streamer’s phone button shortly
and you will hear a dial tone in the hearing
instruments (1)
Steady Blinking
Additional information
Turn o the phone adapter
If you don’t want to receive phone calls to your Streamer, turn off the phone adapter by
disconnecting power. For normal use, the phone adapter uses very little power so it is not
necessary to turn it off.
Range
The phone adapter has a range of up to about 30 meters (to the Streamer Pro),
depending on furniture’s and walls. Within this range you can make hands free phone
conversations with good sound quality (i.e. without “crackle” sound).
Normally you will be able to hear the incoming call alert in the hearing instruments at
a distance, of up to 30-40 meters, but then you have to walk closer to the phone adapter
to hear the phone partner’s voice clearly. This can be usefull when working in
the garden etc.

14 15
Volume control
Use the volume button on the Streamer to adjust the phone volume level in the hearing
instruments. Adjust the volume by pressing up or down shortly. Repeat the short press to
do further adjustments.
The phone volume level set by the Streamer is memorized. That means next time a
phone call is made, the memorized volume level will be applied.
Hear only the phone sound
At first time use of the phone solution, the hearing instrument microphones are default
turned on.
The hearing instrument microphones can be muted allowing you to better hear the
phone conversation. Press the volume up AND down for 1 second simultaneously
(Streamer Pro) or either up OR down for two seconds (Streamer).
Pressing the volume button for 2 seconds (Streamer) or volume up or down
shortly (Streamer Pro) during the conversation, re-activates the hearing instrument
microphones.
For detailed user instructions on the Streamer, please refer to the Streamer manual.
For further support or tips you can check the ConnectLine information
on www.oticon.com/phone