Outdoor Gourmet GR2215120-OG-00 Owner's manual

Assembly Instructions
& User’s Manual
4-Burner Gas Grill
Model number: GR2215120-OG-00
Ref. style: FSOGBG1106
Please keep this instruction manual for future reference
Customer Service: 1-888-922-2336
7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [e-mail]
----------------------OR--------------------
Customer Service: 1-888-837-1380, 10:00am to 7:00pm, Monday thru Friday,
CST
(Made in China)
PD: Austin McCurry 3/18/20
QA: GGMH 3/18/20
PS: NB 3/19/2020
Change style to PLM style#
142992

Page 1 of 32 20200109-Ver.1.0
Table of Contents
Warnings ---------------------------------------------------------------------------------------------
2–7
Tools Required -----------------------------------------------------------------------------------
7
Product Diagram -------------------------------------------------------------------------------
8
Parts List --------------------------------------------------------------------------------------------
9–11
Hardware --------------------------------------------------------------------------------------------
12
Replacement Part List ----------------------------------------------------------------------
13–14
Assembly Instructions ----------------------------------------------------------------------
15–23
Leak Test --------------------------------------------------------------------------------------------
23–24
Lighting Instructions -------------------------------------------------------------------------
25–26
Care and Maintenance --------------------------------------------------------------------
27–29
Trouble Shooting -------------------------------------------------------------------------------
30
Warranty Information ------------------------------------------------------------------------
31
Note: Before beginning assembly of product, make sure all
parts are present. Compare parts with package content list and
hardware contents. If any part is missing or damaged do not
attempt to assemble the unit. Contact customer service for
replacement parts.

Page 2 of 32 20200109-Ver.1.0
Warnings
SAFETY LABELS
DANGER: Indicates an imminent hazardous situation which if not avoided will result in
death or serious injury.
WARNING: Be alert to the possibility of serious bodily injury if the instructions are not
followed. Be sure to read and carefully follow all of the messages.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Warnings
This instruction manual contains important information necessary for the proper
assembly and safe use of this product. Read and follow all warnings and instructions
before assembling and using this product. Failure to follow these instructions and
warnings could result in damage to the product or injury to the user. Keep this
instruction manual for future reference.
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the appliance and immediately call
your gas supplier or fire department.
Failure to follow these instructions could result in fire or explosion which
could cause property damage, personal injury or death.
WARNING
1. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of
this or any other appliance.
2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any
other appliance.

Page 3 of 32 20200109-Ver.1.0
Warnings
DANGER
(a) Do not store a spare LP-gas cylinder under or near this appliance;
(b) Never fill the cylinder beyond 80 percent full;
(c) If the information in (a) and (b) is not followed exactly, a fire causing death or serious
injury may occur.
WARNING
⚫This outdoor cooking gas appliance shall be used only outdoors and shall not be used in a
building, garage or any other enclosed area.
⚫This outdoor cooking gas appliance is not intended to be installed in or on boats. This
appliance is not intended to be installed in or on recreational vehicles.
⚫Use your grill OUTDOORS in a well ventilated space away from dwellings or other
buildings to prevent dangers
associated with gas accumulation
and toxic vapors. The grill should be
situated at least 60 inches (152.4
cm) from buildings. Not adhering to
these clearances will prevent proper
ventilation and may increase the risk
of a fire and/or property damage,
which could also result in personal
injury.
⚫Maintain a minimum clearance of 60
inches (152.4 cm) between all sides
of the grill, deck railings, walls or
other combustible material. DO
NOT use grill under overhead
combustible construction.
⚫DO NOT obstruct the flow of combustion/ventilation air.
⚫DO NOT leave the grill unattended while in use.
⚫DO NOT use while under the influence of drugs or alcohol.
⚫Keep the fuel supply hose away from heated surfaces.
⚫DO NOT put grill in storage or move it after use. Allow grill to cool to touch before
moving/storing. Failure to do so could result in fire resulting in property damage, personal
injury or death.
⚫The appliance is for household use only. DO NOT use this grill for other than its intended
purpose.
⚫Never use natural gas in a unit designed for liquid propane gas.
⚫Never use charcoal or wood briquettes in a gas grill. Flavoring chips must be contained in
a metal smoking box to contain ash and prevent fires.
⚫Leak test must be conducted prior to each use.
Maintain a minimum clearance of 60 inches
from combustible material.

Page 4 of 32 20200109-Ver.1.0
Warnings
⚫Keep a fire extinguisher on hand intended for use with gas products. Refer to your local
authority to determine proper size and type.
⚫Grill is hot when in use. To avoid burns:
⚫DO NOT attempt to move the grill.
⚫Lock the wheels so the unit does not accidentally move.
⚫Wear protective gloves or oven mitts.
⚫DO NOT touch any hot grill surfaces.
DO NOT wear loose clothing or allow hair to come in contact with grill.
USE OF LP GAS CYLINDER AND INSTALLATION
BEFORE INSTALLING:
The installation must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2 or the Standard for Recreational
Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, as
applicable.
BEFORE EVERY USAGE:
Be sure to inspect the hose for leaks, cuts, wear, abrasion, or damage of any sort before using
this appliance. If any damage is apparent, the hose must be replaced with a replacement hose
specified by the manufacturer before it is put in use.
LP GAS CYLINDER:
The LP (liquid propane) cylinder specifically designed to be used with this unit MUST have a 20
lb. (9.1kg) capacity with a Q.C.C. Type 1 cylinder valve and an overfilling protection device
(OPD). Only use LP cylinders with this type of valve.
LP tank valve must have:
⚫Purchase LP tanks only with these required measurements: 12”
(30.5cm) (diameter) x 18” (45.7cm) (tall) with 20lb. (9kg). Capacity
maximum.
⚫Q.C.C. Type 1 outlet compatible with regulator or appliance.
⚫Safety relief valve.
⚫UL listed Overfill Protection Device (OPD). This
OPD safety feature is identified by a unique
triangular hand wheel. Use only tanks equipped with
this type of valve.
⚫LP tank must be arranged for vapor withdrawal.
The LP cylinder must be constructed and marked in
accordance with the Specifications for LP-Gas
Cylinders of the U.S. Department of Transportation
(D.O.T.) or the National Standard of Canada
CAN/CSA –B339, Cylinder, Spheres and Tubes for
Transportation of Dangerous Goods; and
Commission of Dangerous Goods; as applicable.
⚫The LP cylinder must include a collar to protect the cylinder valve.
LP Tank Valve
Safety Cap

Page 5 of 32 20200109-Ver.1.0
Warnings
⚫If the outdoor cooking gas appliance is not in use, the gas must be turned off at the supply
cylinder(s).
⚫The LP cylinder must be stored outdoors out of the reach of children and MUST NOT be
stored in a building, garage, shed, breezeway, or any other enclosed area.
⚫Storage of an outdoor cooking gas appliance indoors is permissible ONLY if the cylinder is
disconnected and removed from the outdoor cooking gas appliance.
⚫The cylinder should ALWAYS be put in an upright position.
DANGER
⚫DO NOT connect this grill to an existing #510 POL cylinder valve with Left hand threads.
The Type 1 valve can be identified with the large external threads on the valve outlet.
⚫DO NOT connect to a propane cylinder exceeding its capacity.
⚫DO NOT connect to a cylinder that uses any other type of valve connection device.
⚫Never store a spare LP gas cylinder under or near your grill. This could cause pressure to
be expelled through the vapor relief valve resulting in fire, explosion or severe personal
injury including death.
⚫Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from
obstructions and debris.
⚫DO NOT insert any foreign objects into the valve outlet. Damage to the valve outlet could
result. A valve outlet can cause a leak, possibly resulting in explosions, fire, severe bodily
harm or death.
WARNING
FOR FILLING THE LP GAS CYLINDER
⚫Allow only qualified LP gas dealers to properly fill or repair your LP cylinder.
⚫DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a
dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to
expel propane gas vapors. The vapor is combustible and if it comes in contact with a
spark source or flame an explosion causing severe burns, bodily harm or death could
occur.
⚫Always use a safety cap when grill is not connected to a cylinder.
⚫If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a
Type 1 valve and an over-filling prevention device (OPD).

Page 6 of 32 20200109-Ver.1.0
Warnings
INSTALLING GAS CYLINDER
1. Check that cylinder valve is closed by turning knob
clockwise.
2. Pull the tank fixing bar up and tighten.
3. Place cylinder into tank holder and fix it in place with the
tank fixing bar. Place cylinder so that the valve opening
faces the right side table and verify that the hose is not
kinked/damaged.
4. Attach or detach regulator to LP cylinder only when
cylinder is rested on the tank holder.
WARNING: Keep the fuel supply hose
away from any heated surfaces.
CONNECTION PROCEDURES
1. Make sure the tank valve is closed (turn valve
clockwise until tight).
2. Check tank valve to insure it has proper external
male threads.
3. Make sure all burner valves are turned OFF.
4. Inspect valve connections, port, and regulator
assembly. Look for any damage or debris. Remove
any debris. Inspect hose for damage. Never attempt
to use damaged or obstructed equipment. See local
L.P gas dealer for repair.
5. When connecting regulator assembly to the valve, hand tighten the quick coupling nut
clockwise to a complete stop. Do not use a wrench to tighten. Use of a wrench may damage
the quick coupling nut and result in a hazardous condition.
6. Open the tank valve fully (counterclockwise). Use a soapy water solution to check all
connections for leaks before attempting to light the grill (see P.24-25). If a leak is found, turn

Page 7 of 32 20200109-Ver.1.0
the tank valve off and do not use the grill until a local LP gas dealer can make repairs.
Warnings
TO DISCONNECT LP CYLINDER:
1. Turn the burner valves off.
2. Turn the tank valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from the tank valve by turning the quick coupling nut
counterclockwise.
CAUTION
⚫When installing LP cylinders, the pressure regulator and hose supplied by the
manufacturer MUST be used with the appropriate cylinder. Replacement regulators
and hoses need to be specified by the manufacturer of this appliance.
⚫Place dust cap on cylinder valve outlet whenever cylinder is not in use. Only install the
type of dust cap on the cylinder valve outlet that is provided with the cylinder. Other
types of caps or plugs may result in leakage of propane.
Tools Required
1
Phillips screwdriver (not included)
2
Adjustable wrench (not included)

Page 8 of 32 20200109-Ver.1.0
Product Diagram

Page 9 of 32 20200109-Ver.1.0
Parts List
1
Warming Rack
1 pc
2
Cooking Grate
2 pcs
3
Flame Tamer
4 pcs
4
Grill Body Assembly
1 pc
5
Thermometer
1 pc
6
Side Handle
1 pc
7
Left Side Table
1 pc
8
Left Side Condiment
Tray
1 pc

Page 10 of 32 20200109-Ver.1.0
Parts List
9
Grease Cup
1 pc
10
Right Side Table
1 pc
11
Right Side Table Panel
1 pc
12
Lid Handle Assembly
1 pc
13
Left Cart Assembly
1 pc
14
Front Foot Pad
1 pc
15
Rear Foot Pad
1 pc
16
Rear Cart Supporting
Beam
2 pcs

Page 11 of 32 20200109-Ver.1.0
Parts List
17
Front Cart Panel
1 pc
18
Right Cart Assembly
1 pc
19
Tank Heat Shield
1 pc
20
Wheel Assembly
2 pcs
21
Tank Holder
1 pc
22
Thermometer Bezel
1 pc
23
Control Knob
4 pcs

Page 12 of 32 20200109-Ver.1.0
Hardware
A
M6x10mm Bolt (Black)
17 pcs
B
M6x10mm Bolt (Silver)
2 pcs
C
Cotter Pin
2 pcs
D
Washer
2 pcs
E
M6x12mm Bolt
18 pcs
F
M6x20mm Bolt
2 pcs
G
M6 Washer
2 pcs
H
Thermometer Nut
1 pc
I
M6 Nut
4 pcs
J
Thermometer Washer
2 pcs
Note: Hardware C, D, F, G, H and J have been pre-attached on the related
components.
For Bolt E, 4 pcs are stored in the hardware pack and 14 pcs have been
pre-attached on the related components.

Page 13 of 32 20200109-Ver.1.0
Replacement Part List (I)

Page 14 of 32 20200109-Ver.1.0
Replacement Part List (II)
Part Number
Component
Part Name
Part Number
Component
Part Name
MET-4B0001
1
Warming Rack
MET-6B0002
2
Cooking Grate
MET-6B0003
3
Flame Tamer
MET-4B0002
4a
Grill Body –Lid
GAS-4B0001
4b
Grill Body –Valve & Manifold
Assembly
MET-4B0003
4c
Grill Body –Control Panel
MET-4B0004
4d
Grill Body –Fire Box
MET-6B0006
4e
Grill Body –Burner Support
MET-5B0007
4f
Grill Body –Carry Over
GAS-6B0004
4g
Grill Body –Ignition Burner
GAS-6B0001
4h
Grill Body –Burner
ELE-5B0001
4i
Grill Body –Ignition Electrode
& Wire
GAS-5B0001
4j
Grill Body –Hose & Regulator
Assembly
PLA-6B0001
4k
Grill Body –Knob Bezel
MET-4B0005
4l
Grill Body –Heat Shield
THE-6B0001
5
Thermometer
MET-5B0009
6
Side Handle
MET-5B0010
7
Left Side Table
PLA-6B0002
8
Left Side Condiment Tray
MET-5B0011
9
Grease Cup
MET-5B0012
10
Right Side Table
MET-5B0013
11
Right Side Table Panel
MET-5B0005
12a
Handle
MET-6B0014
12b
Handle Bezel
MET-4B0006
13a
Left Cart
MET-6B0011
13b
Match Holder
PLA-5B0001
14
Front Foot Pad
PLA-5B0002
15
Rear Foot Pad
MET-4B0007
16
Rear Cart Supporting Beam
MET-4B0008
17
Cart Front Panel
MET-4B0009
18a
Right Cart
MET-4B0010
18b
Tank Fixing Bar
MET-4B0011
19
Tank Heat Shield
PLA-4B0001
20a
Wheel
MET-4B0012
20b
Wheel Axle
MET-4B0013
21
Tank Holder
THE-6B0002
22
Thermometer Bezel
PLA-6B0003
23
Control Knob

Page 15 of 32 20200109-Ver.1.0
Assembly Instructions
Step 1.
Attach the Front Foot Pad (14)
and Rear Foot Pad (15) to the
Left Cart Assembly (13).
Step 2.
Disassemble the Cotter Pin
(C),Washer (D) from the
Wheel Axle (20b). Attach the
Wheel (20a) on the Right Cart
Assembly (18) using Washer
(D), Cotter Pin (C) and Wheel
Axle (20b) as shown below.
Hardware:
#C –2 pcs
#D –2 pcs

Page 16 of 32 20200109-Ver.1.0
Assembly Instructions
Step 3.
Attach the Front Cart Panel
(17) on the left cart assembly
and right cart assembly using 4
pcs M6x10 Bolts (A).
Hardware:
#A –4 pcs
Step 4.
Attach 2 pcs Rear Cart
Supporting Beams (16) on
the cart assembly using 4 pcs
M6x10 bolts (A).
Hardware:
#A –4 pcs

Page 17 of 32 20200109-Ver.1.0
Assembly Instructions
Step 5.
Attach the Tank Heat Shield
(19) on the right side of cart
assembly using 2 pcs M6x10
bolts (B) as shown below.
Hardware:
#B –2 pcs
Step 6.
Attach the Tank Holder (21) to
the right side of cart assembly
by using 2 pcs M6x10 bolts
(A) as shown below.
Hardware:
#A –2 pcs

Page 18 of 32 20200109-Ver.1.0
Assembly Instructions
Step 7.
This step needs two people to
complete! Put the Grill Body
Assembly (4) carefully at the
top of cart assembly. Secure the
part as shown below with 4 pcs
of M6x10mm bolts (A). Be
careful to support the grill body
and cart assembly during this
step.
Hardware:
#A –4 pcs
Step 8.
Insert the Control Knobs (23)to
the pins of main burner valve.
Apply light pressure to secure
the knob firmly. Make sure that
the flat end of the pin is aligned
with the D-shape hole in control
knob (with the triangle pointing
upwards).

Page 19 of 32 20200109-Ver.1.0
Assembly Instructions
Step 9.
Disassemble Thermometer
Nut (H) and Thermometer
Washers (J) from the
Thermometer (5) and
Thermometer Bezel (22).
Attach the thermometer and
the thermometer bezel to the
grill lid. Align them through the
hole on the lid and place the
washers underneath the nut
then tighten the nut as shown.
Hardware:
#H –1 pc
#J –2 pcs
Step 10.
Disassemble Handle Bezel
(12b) and M6x20 bolts (F)
from the Lid Handle
Assembly (12). Insert the
Handle (12a) to the lid by using
2 pcs M6x20 bolts (F) and
Handle Bezel (12b) as shown
below.
Hardware:
#F –2 pcs