Outdoor Gourmet GR2210613-OG-00 Owner's manual

Assembly Instructions
& User’s Manual
Premium Gas Grill
Model number: GR2210613-OG-00
Ref. style: 160864
Please keep this instruction manual for future reference
Customer Service: 1-888-922-2336
7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [e-mail]
----------------------OR--------------------
Customer Service: 1-888-837-1380, 10:00am to 7:00pm, Monday thru Friday,
CST
(Made in China)

Page 1 of 37 20201230-Ver.1.0
Table of Contents
Warnings ---------------------------------------------------------------------------------------------
2–7
Tools Required -----------------------------------------------------------------------------------
7
Product Diagram -------------------------------------------------------------------------------
8
Parts List --------------------------------------------------------------------------------------------
9–12
Hardware and Tools List ------------------------------------------------------------------
13
Replacement Part List ----------------------------------------------------------------------
14–16
Assembly Instructions ----------------------------------------------------------------------
17–28
Leak Test --------------------------------------------------------------------------------------------
29–30
Lighting Instructions -------------------------------------------------------------------------
31–32
Wood Chip Tray Operation Instructions-----------------------------------------
33–34
Care and Maintenance --------------------------------------------------------------------
35–37
Trouble Shooting -------------------------------------------------------------------------------
38
Warranty Information ------------------------------------------------------------------------
39
Note: Before beginning assembly of product, make sure all
parts are present. Compare parts with package content list and
hardware contents. If any part is missing or damaged do not
attempt to assemble the unit. Contact customer service for
replacement parts.

Page 2 of 37 20201230-Ver.1.0
Warnings
SAFETY LABELS
DANGER: Indicates an imminent hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
Warnings
This instruction manual contains important information necessary for the proper
assembly and safe use of this product. Read and follow all warnings and instructions
before assembling and using this product. Failure to follow these instructions and
warnings could result in damage to the product or injury to the user. Keep this
instruction manual for future reference.
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the appliance and immediately call
your fire department.
Failure to follow these instructions could result in fire or explosion which
could cause property damage, personal injury or death.
WARNING
1. Do not store or use gasoline or other flammable liquids or vapors in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use shall not be stored in the vicinity
of this or any other appliance.
DANGER
(a) Do not store a spare LP gas cylinder under or near this appliance;
(b) Never fill the cylinder beyond 80 percent full;
(c) If the information in (a) and (b) is not followed exactly, a fire causing
death or serious injury may occur.

Page 3 of 37 20201230-Ver.1.0
Warnings
WARNING
⚫This outdoor cooking gas appliance shall be used only outdoors and shall not be used in a
building, garage or any other enclosed area.
⚫This outdoor cooking gas appliance is not intended to be installed in or on boats. This
appliance is not intended to be
installed in or on recreational
vehicles.
⚫Use your grill OUTDOORS in a well
ventilated space away from dwellings
or other buildings to prevent dangers
associated with gas accumulation and
toxic vapors. The grill should be
situated at least 60 inches (152.4 cm)
from buildings. Not adhering to these
clearances will prevent proper
ventilation and may increase the risk
of a fire and/or property damage,
which could also result in personal
injury.
⚫Maintain a minimum clearance of 60
inches (152.4 cm) between all sides of grill, deck railings, walls or other combustible
material. DO NOT use grill under overhead combustible construction.
⚫DO NOT obstruct the flow of combustion/ventilation air.
⚫DO NOT leave the grill unattended while in use.
⚫DO NOT use while under the influence of drugs or alcohol.
⚫Keep the fuel supply hose away from heated surfaces.
⚫DO NOT put grill in storage or move it after use. Allow grill to cool to touch before
moving/storing. Failure to do so could result in fire resulting in property damage, personal
injury or death.
⚫The appliance is for household use only. DO NOT use this grill for other than its intended
purpose.
⚫Never use natural gas in a unit designed for liquid propane gas.
⚫Never use charcoal or wood briquettes in a gas grill. Flavoring chips must be contained in
a metal smoking box to contain ash and prevent fires.
⚫Leak test must be conducted prior to each use.
⚫Keep a fire extinguisher on hand intended for use with gas products. Refer to your local
authority to determine proper size and type.
⚫Keep the outdoor cooking gas appliance area clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
⚫Grill is hot when in use. To avoid burns:
⚫DO NOT attempt to move the grill.
⚫Lock the wheels so the unit does not accidentally move.
⚫Wear protective gloves or oven mitts.
⚫DO NOT touch any hot grill surfaces.
⚫DO NOT wear loose clothing or allow hair to come in contact with grill.
Maintain a minimum clearance of 60 inches
from combustible material.

Page 4 of 37 20201230-Ver.1.0
Warnings
USE OF LP GAS CYLINDER AND INSTALLATION
BEFORE INSTALLING:
The installation must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2 or the Standard for Recreational
Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, Recreational Vehicle Code, as
applicable.
BEFORE EVERY USAGE:
Be sure to inspect the hose for leaks, cuts, wear, abrasion, or damage of any sort before using
this appliance. If any damage is apparent, the hose must be replaced with a replacement hose
specified by the manufacturer before it is put in use.
LP GAS CYLINDER:
The LP (liquid propane) cylinder specifically designed to be used with this unit MUST have a
20 lb. (9.1kg) capacity with a Q.C.C. Type 1 cylinder valve and an overfilling protection device
(OPD). Only use LP cylinders with this type of valve.
LP tank valve must have:
⚫Purchase LP tanks only with these required measurements: 12”
(30.5cm) (diameter) x 18” (45.7cm) (tall) with 20lb. (9kg). Capacity
maximum.
⚫Q.C.C. Type 1 outlet compatible with regulator or appliance.
⚫Safety relief valve.
⚫UL listed Overfill Protection Device (OPD). This OPD safety feature
is identified by a unique triangular hand wheel. Use only tanks
equipped with this type of valve.
⚫LP tank must be arranged for vapor
withdrawal.
The LP cylinder must be constructed and
marked in accordance with the
Specifications for LP-Gas Cylinders of the
U.S. Department of Transportation (D.O.T.)
or the National Standard of Canada
CAN/CSA –B339, Cylinder, Spheres and
Tubes for Transportation of Dangerous
Goods; and Commission of Dangerous
Goods; as applicable.
⚫The LP cylinder must include a collar to protect the cylinder valve.
⚫If the outdoor cooking gas appliance is not in use, the gas must be turned off at the supply
cylinder(s).
⚫The LP cylinder must be stored outdoors out of the reach of children and MUST NOT be
stored in a building, garage, shed, breezeway, or any other enclosed area.
⚫Storage of an outdoor cooking gas appliance indoors is permissible ONLY if the cylinder is
disconnected and removed from the outdoor cooking gas appliance.
⚫The cylinder should ALWAYS be put in an upright position.

Page 5 of 37 20201230-Ver.1.0
Warnings
DANGER
⚫DO NOT connect this grill to an existing #510 POL cylinder valve with Left hand threads.
The Type 1 valve can be identified with the large external threads on the valve outlet.
⚫DO NOT connect to a propane cylinder exceeding its capacity.
⚫DO NOT connect to a cylinder that uses any other type of valve connection device.
⚫Never store a spare LP gas cylinder under or near your grill. This could cause pressure to
be expelled through the vapor relief valve resulting in fire, explosion or severe personal
injury including death.
⚫Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from
obstructions and debris.
⚫DO NOT insert any foreign objects into the valve outlet. Damage to the valve outlet could
result. A valve outlet can cause a leak, possibly resulting in explosions, fire, severe bodily
harm or death.
WARNING
FOR FILLING THE LP GAS CYLINDER
⚫Allow only qualified LP gas dealers to properly fill or repair your LP cylinder.
⚫DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a
dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to
expel propane gas vapors. The vapor is combustible and if it comes in contact with a
spark source or flame an explosion causing severe burns, bodily harm or death could
occur.
⚫Always use a safety cap when grill is not connected to a cylinder.
⚫If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a
Type 1 valve and an over-filling prevention device (OPD).

Page 6 of 37 20201230-Ver.1.0
Warnings
INSTALLING GAS CYLINDER
1. Check that the cylinder valve is closed by turning the knob in clockwise.
2. Pull out the cylinder holder along the slot.
3. Place the cylinder into cylinder holder and tighten the fixing bolt. Place cylinder so that the
valve opening faces the side burner in such a way that the hose is not kinked/damaged.
4. Fix the cylinder holder in place and lock with the latch bracket.
5. Attach or detach the regulator to the LP gas cylinder only when the cylinder is placed on the
cylinder holder.

Page 7 of 39 20201230-Ver.1.0
Warnings
CONNECTION PROCEDURES
1. Make sure the tank valve is closed (turn valve
clockwise until tight).
2. Check tank valve to insure it has proper external
male threads.
3. Make sure all burner valves are turned OFF.
4. Inspect valve connections, port, and regulator
assembly. Look for any damage or debris. Remove
any debris. Inspect hose for damage. Never
attempt to use damaged or obstructed equipment.
See local L.P gas dealer for repair.
5. When connecting regulator assembly to the valve,
hand tighten the quick coupling nut clockwise to a
complete stop. Do not use a wrench to tighten. Use of a wrench may damage the quick
coupling nut and result in a hazardous condition.
6. Open the tank valve fully (counterclockwise). Use a soapy water solution to check all
connections for leaks before attempting to light the grill (see P.29-30). If a leak is found,
turn the tank valve off and do not use the grill until a local LP gas dealer can make repairs.
TO DISCONNECT LP CYLINDER:
1. Turn the burner valves off.
2. Turn the tank valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from the tank valve by turning the quick coupling nut
counterclockwise.
CAUTION
⚫When installing LP cylinders the pressure regulator and hose supplied by the
manufacturer MUST be used with the appropriate cylinder. Replacement regulators
and hoses need to be specified by the manufacturer of this appliance.
⚫Place dust cap on cylinder valve outlet whenever cylinder is not in use. Only install the
type of dust cap on the cylinder valve outlet that is provided with the cylinder. Other
types of caps or plugs may result in leakage of propane.
Tools Required
1
Phillips screwdriver (included in hardware pack
item A)
2
Hex nut wrench (included in hardware pack item
D)
3
Adjustable wrench (not included)

Page 8 of 39 20201230-Ver.1.0
Product Diagram

Page 9 of 39 20201230-Ver.1.0
Parts List
1
Warming Rack
1 pc
2
Cooking Grate
3 pcs
3
Flame Tamer
5 pcs
4
Grill Body Assembly
1 pc
5
Side Burner Grate
1 pc
6
Side Burner Assembly
1 pc
7
Side Burner Control
Panel
1 pc
8
Control Knob Bezel
1 pc

Page 10 of 39 20201230-Ver.1.0
Parts List
9
Control Knob / Side
Burner Control Knob
1 pc
10
Side Table Assembly
1 pc
11
Side Table Panel
1 pc
12
Grease Cup
1 pc
13
Grease Collecting Tray
1 pc
14
Left Cart Side Panel
Assembly
1 pc
15
Door Handle Bezel
4 pcs
16
Tank Holder Assembly
1 pc

Page 11 of 39 20201230-Ver.1.0
Parts List
17
Rear Cart Assembly
1 pc
18
Bottom Cart Panel
1 pc
19
Right Cart Side Panel
1 pc
20
Front Cart Assembly
1 pc
21
Cart Frame Connecting
Tube
4 pcs
22
Door Handle
2 pcs
23
Left Door Assembly
1 pc
24
Plastic Insert
4 pcs

Page 12 of 39 20201230-Ver.1.0
Parts List
25
Right Door Assembly
1 pc
26
Locking Caster
4 pcs
27
Griddle
1 pc
28
Thermometer
1 pc
29
Thermometer Bezel
1 pc
30
Side Burner Lid Handle
1 pc
31
Wood Chip Tray
Channel
1 pc
32
Wood Chip Tray
Assembly
1 pc

Page 13 of 39 20201230-Ver.1.0
Hardware and Tools List
A
Phillips Head Screwdriver
1 pc
B
M4x10mm Bolt (Silver)
8 pcs
C
M6x12mm Bolt (Black)
46 pcs
D
Hex Nut Wrench
1 pc
E
LR6/AA Battery
1 pc
F
M6x12mm Bolt (Silver)
8 pcs
G
M4x8mm Bolt
6 pcs
H
M4 Washer
2 pcs
I
M4 Nut
2 pcs
J
Thermometer Washer
1 pc
K
Thermometer Nut
1 pc
Note: Hardware G, H, I, J and K have been pre-attached on the related
components.
For Bolt C, 38 pcs are stored in the hardware pack, and 8 pcs have been
pre-attached on the related components.

Page 14 of 39 20201230-Ver.1.0
Replacement Part List (I)

Page 15 of 39 20201230-Ver.1.0
Replacement Part List (II)
Part Number
Component
Part Name
Part Number
Component
Part Name
MET-5B0065
1
Warming Rack
MET-5B0066
2
Cooking Grate
MET-5B0067
3
Flame Tamer
MET-5B0068
4a
Grill Body –Lid
HAR-5B0002
4b
Grill Body –Burner Cotter Pin
HAR-5B0001
4c
Grill Body –Burner Fixing Pin
MET-5B0028
4d
Grill Body –Lid Handle Bezel
MET-5B0069
4e
Grill Body –Lid Handle
MET-5B0030
4f
Grill Body –Lid Support Left
Bracket
MET-5B0070
4g
Grill Body –Fire Box
MET-5B0032
4h
Grill Body –Lid Support Right
Bracket
MET-4B0112
4i
Grill Body –Lid Hinge Pin
GAS-5B0003
4j
Grill Body –Burner
ELE-5B0002
4k
Grill Body –Ignition Electrode
& Wire A
MET-5B0040
4l
Grill Body –Igniter Cover
ELE-5B0003
4m
Grill Body –Ignition Electrode
& Wire B
ELE-5B0004
4n
Grill Body –Ignition Electrode
& Wire C
ELE-5B0005
4o
Grill Body –Ignition Electrode
& Wire D
ELE-5B0006
4p
Grill Body –Igniter
GAS-5B0005
4q
Grill Body –Hose & Regulator
Assembly
MET-5B0037
4r
Grill Body –Fire Box Front
Heat Shield
GAS-5B0004
4s
Grill Body –Valve & Manifold
Assembly
MET-5B0038
4t
Grill Body –Control Panel
HAR-4B0009
4u
Grill Body –Lid Hinge Cotter
Pin
MET-6B0017
5
Side Burner Grate
MET-5B0071
6a
Side Burner –Lid
ELE-5B0007
6b
Side Burner –Ignition
Electrode
GAS-5B0007
6c
Side Burner –Side Burner
MET-5B0072
6d
Side Burner –Side Burner
Frame
ELE-5B0008
6e
Side Burner –Ignition Wire
MET-5B0043
7
Side Burner Control Panel
PLA-6B0001
8
Control Knob Bezel
PLA-6B0003
9
Control Knob / Side Burner
Control Knob
MET-5B0073
10a
Side Table
PLA-5B0004
10b
Side Table Wire Clip
MET-5B0074
11
Side Table Panel
MET-5B0047
12
Grease Cup
MET-5B0075
13
Grease Collecting Tray
MET-5B0076
14a
Left Cart Side Panel
PLA-5B0005
14b
Plastic Ring
MET-5B0077
15
Door Handle Bezel
MET-5B0051
16a
Tank Left Sliding Bracket
MET-5B0052
16b
Tank Holder Base
MET-5B0053
16c
Tank Right Sliding Bracket
HAR-5B0003
16d
Tank Fixing Screw
MET-5B0054
16e
Tank Locking Plate
MET-5B0078
17a
Rear Cart Panel
MET-5B0079
17b
Rear Cart Frame
MET-5B0080
17c
Match Holder
MET-5B0058
18
Bottom Cart Panel
MET-5B0081
19
Right Cart Side Panel
MET-5B0082
20
Front Cart Assembly

Page 16 of 39 20201230-Ver.1.0
Replacement Part List (II)
Part Number
Component
Part Name
Part Number
Component
Part Name
MET-5B0061
21
Cart Frame Connecting Tube
MET-5B0062
22
Door Handle
MET-5B0063
23
Left Door Assembly
PLA-5B0006
24
Plastic Insert
MET-5B0064
25
Right Door Assembly
HAR-5B0004
26
Locking Caster
MET-6B0016
27
Griddle
THE-6B0001
28
Grill Body –Thermometer
THE-6B0002
29
Grill Body –Thermometer
Bezel
MET-5B0083
30
Side Burner Lid Handle
MET-5B0034
31
Grill Body –Wood Chip Tray
Channel
MET-5B0035
32a
Grill Body –Wood Chip Tray
Cover
MET-5B0036
32b
Grill Body –Wood Chip Tray

Page 17 of 39 20201230-Ver.1.0
Assembly Instructions
Step 1.
Connect the Front Cart
Assembly (20) and Rear Cart
Assembly (17) with 4 pcs Cart
Frame Connecting Tube (21)
then secure them with 8 pcs
M6x12 Bolts Black (C). Do not
fully tighten the bolts.
Hardware:
#C–8 pcs
Step 2.
Attach the Left Cart Side
Panel Assembly (14) to the
cart assembly using 4 pcs
M6x12 Bolts Black (C). Do not
fully tighten the bolts.
Hardware:
#C –4 pcs

Page 18 of 39 20201230-Ver.1.0
Assembly Instructions
Step 3.
Attach the Right Cart Side
Panel (19) to the cart assembly
using 4 pcs M6x12 Bolts
Black (C). Do not fully tighten
the bolts.
Hardware:
#C –4 pcs
Step 4.
Attach the Bottom Cart Panel
(18) to the cart assembly using
10 pcs M6x12 bolts Black (C).
Please follow the label at the
bottom of the cart panel to
identify the rear position. Fully
tighten all the bolts in the cart
assembly.
Hardware:
#C –10 pcs

Page 19 of 39 20201230-Ver.1.0
Assembly Instructions
Step 5.
Insert the Locking Casters
(26) into the threaded holes on
the bottom of the cart
assembly. Use the Hex Nut
Wrench (D) to tighten the
caster by turning in clockwise
until it is fully secured.
Tool:
#D –1 pc
Step 6.
Lock all 4 locking casters to
prevent the unit moving by
stepping the pad downwards.
Slide the tank holder base from
the Tank Holder Assembly
(16) then attach it to the cart
assembly using 4 pcs M6x12
bolts Black (C) as shown.
Hardware:
#C –4 pcs