overstock GSI22X4 User manual

P.1
ASSEMBLY INSTRUCTIONS
68" Fluted Glass Sideboard
ITEM# GSI22X4
THANK YOU
If you find any damage after opening, please be sure to take pictures of the
damage and contact us. We will help you solve the problem as soon as possible.

P.2
VllI. Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. A Phillips head screwdriver is required for the assembly of this product .
Vl. Power tools should not be used to assemble this product .
II. Follow each step carefully to ensure the proper assembly of this product.
21
VII. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
Assembly the furniture on empty carton, carpet, or rug to prevent scratches or
damage.
VllII.

PARTS LIST
A Carton part list
P.3
A:Top panel 1 pc B:Bottom panel 1 pc D:Right panel 1 pc C:Left panel 1 pc
H: Top Apron 2 pcsE: Partition Panel 1 pc F: Front Stretcher 2 pcs
I: Bottom Front Apron 1 pc J: Support Leg 1 pc K:Door 4 pcs
G: Shelf 2 pcs
L: Drawer Front Panel 2 pcs
M: Drawer Left Panel 2 pcs
S:Drawer Bottom Rail 2pcs
O:Drawer Back panel 2 pcs
Q:Top Back panel 1 pc
P:Drawer Bottom panel 2pcs
R:Bottom Back panel 1 pc
N:Drawer Right Panel 2 pcs
T: Plastic Tube 1 pc

PARTS LIST
P.4
HARDWARE LIST
6.Hinge 8pcs
Ø26
7:Screw 48 pcs
9.Shelf support pin 8 pcs
Ø8x5x16
1:Cam lock 32 pcs
Ø15x10
2:Cam bolt 22 pcs 3:Wood plug 26 pcs
Ø6x32 Ø8x30
8:Wood screw 30 pcs
5:Screw 12 pcs
Ø4x18
4:Pull knob 4 pcs
Ø3.0x12
14.Bolt & Hex key 1 pcs
12.Screw 18 pcs
20.Sticker 32 pcs
22.:Glue tube 2 pcs
13:Cam bolt 10 pcs 15:Handle 4 pcs 16:Screw 2 pcs
17:Plastic strap 2 pcs 18:Nut 2 pcs 19:Screw 2 pcs
Ø4x25
21:Wood plug 2 pcs
Ø6x30
10: Door stopper 2pc 11: Screw 4pc
Ø3x14
Ø6x32 M6x30 Ø3x15
Ø4x25
Ø3.5 X 16
M4

P.5
Step 1
2: 6 pcs
Step 2
2: 8 pcs
3: 4 pcs
12: 6 pcs
3: 4 pcs
3
2
2
A3
3
3
2
2
2
2
12
A
H
H
12
12
12
12
12
C
2
22
2
2
2
2
2
D
3
33
3
DC
Secure cam bolt (2) into part (A) with Philips head screwdriver as per diagram, then attach part (H)
to part (A) by using screw (12) with Philips head screwdriver as per diagram.
Secure cam bolt (2) into part (C,D) with Philips head screwdriver as per diagram, and insert
wooden dowels (3) into part (C,D) as per diagram.

Step 3
P.6
2: 2 pcs
3: 4 pcs
Step 4
2: 4 pcs
3: 6 pcs
x2 I
10: 2 pcs
11: 4 pcs
Secure cam bolt (2) into part (E) with Philips head screwdriver, and then turn panel (E) over.
Insert wooden dowels (3) into part (E) as per diagram.
23
3
E
E2
3
3
Insert wooden dowels (3) into part (I,F). Using screw (11) secure the door stopper (10) to parts (F) as
per diagram. Secure cam bolt (2) into part (I) with Philips head screwdriver as per diagram.
I
2
F
3
3
11 10
F
I
2
2
2
3
3

Step 5
P.7
2: 2 pcs
3: 8 pcs
14: 1 pcs
3
B
3
3
3
3
3
3
3
2
2
14
J
B
Insert wooden dowels (3) into part (B) and secure cam bolt (2) into part (B) with Philips head
screwdriver as per diagram.
Attach part (J) to part (B) by using screw (14).

P.8
Step 6
1: 4 pcs
I
21 3
Note: Please don't over-tighten the
cam lock, otherwise, it will be broken.
Use cam lock (1) secure parts (I) to part (B) with Philips head screwdriver as per diagram.
B
B
1
1
1
1

P.9
Step7
1: 2 pcs
21 3
Note: Please don't over-tighten the
cam lock, otherwise, it will be broken.
B
E
1
1
B
E
Using cam lock (1) secure parts (E) to part (B) with Philips head screwdriver as per diagram.

P.10
Step 8
1: 2 pcs
21 3
Note: Please don't over-tighten the
cam lock, otherwise, it will be broken.
1
EF
F
1
E
Use cam lock (1) secure parts (F) to part (E) with Philips head screwdriver as per diagram.