oviala ATHENES User manual

9
9
9
9

9
9
9
9
9
9
9

1
8
3
1
8
3
1
8
3
9
9
9
11
11

9
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
9
9
9
12
12
12
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ

9
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
9
9
9
9
9
9
10
12
12
12
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ

Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
1
8
3
1
8
3
1
8
3
9
9
9
9
9
9
10
11
11
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
One for each other of the slats is required.
*Use bolt䐤x46, plastic spacer䐥x46 and nut䐦x46 to tighten for 300x300 cm.*
Use bolt䐤x64, plastic spacer䐥x64 and nut䐦x64 to tighten for 300x400 cm.
Secure the louvers at each end.
NOTE: Do not over tighten. Over tightening will prevent louvers from moving.
Step 8
Mark holes for expansion bolt 䐨x4 on each post.
Note: the drill size should be 12 mm.
Insert the bolts. Use an hammer drill if necessary. Place the posts
over the bolts. Tighten the nuts.
Once installed, make sure any remaining plastic is removed and silicone is used along
all corners and gutters to waterproof.
Tight nuts
ÂÃ
(WDSH
)L[DWLRQDXVRO
6WHS
)ORUHIL[DWLRQ
6WHS
)ORUHIL[DWLRQ

1
8
3
1
8
3
1
8
3
9
9
9
10
11
11
One for each other of the slats is required.
*Use bolt䐤x46, plastic spacer䐥x46 and nut䐦x46 to tighten for 300x300 cm.*
Use bolt䐤x64, plastic spacer䐥x64 and nut䐦x64 to tighten for 300x400 cm.
Secure the louvers at each end.
NOTE: Do not over tighten. Over tightening will prevent louvers from moving.
Step 8
Mark holes for expansion bolt 䐨x4 on each post.
Note: the drill size should be 12 mm.
Insert the bolts. Use an hammer drill if necessary. Place the posts
over the bolts. Tighten the nuts.
Once installed, make sure any remaining plastic is removed and silicone is used along
all corners and gutters to waterproof.
Tight nuts
ÂÃ
(WDSH
)L[DWLRQDXVRO
6WHS
)ORUHIL[DWLRQ
6WHS
)ORUHIL[DWLRQ

9
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
9
9
9
12
12
12
12
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ

9
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
9
9
9
9
9
9
10
12
12
12
12
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ

One for each other of the slats is required.
*Use bolt䐤x46, plastic spacer䐥x46 and nut䐦x46 to tighten for 300x300 cm.*
Use bolt䐤x64, plastic spacer䐥x64 and nut䐦x64 to tighten for 300x400 cm.
Secure the louvers at each end.
NOTE: Do not over tighten. Over tightening will prevent louvers from moving.
Step 8
Mark holes for expansion bolt 䐨x4 on each post.
Note: the drill size should be 12 mm.
Insert the bolts. Use an hammer drill if necessary. Place the posts
over the bolts. Tighten the nuts.
Once installed, make sure any remaining plastic is removed and silicone is used along
all corners and gutters to waterproof.
Tight nuts
ÂÃ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
9
9
9
9
9
9
10
11
11
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
One for each other of the slats is required.
*Use bolt䐤x46, plastic spacer䐥x46 and nut䐦x46 to tighten for 300x300 cm.*
Use bolt䐤x64, plastic spacer䐥x64 and nut䐦x64 to tighten for 300x400 cm.
Secure the louvers at each end.
NOTE: Do not over tighten. Over tightening will prevent louvers from moving.
Step 8
Mark holes for expansion bolt 䐨x4 on each post.
Note: the drill size should be 12 mm.
Insert the bolts. Use an hammer drill if necessary. Place the posts
over the bolts. Tighten the nuts.
Once installed, make sure any remaining plastic is removed and silicone is used along
all corners and gutters to waterproof.
Tight nuts
ÂÃ
(WDSH
)L[DWLRQDXVRO
6WHS
)ORUHIL[DWLRQ
6WHS
)ORUHIL[DWLRQ

m.*
.
g.
e is used along
376.2
376.2
266
266
296
296
266
373
403
296
458.5
458.5
3762
3762
2660
2660
2960
2960
2660
3730
4030
2960
4585
4585

Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ
12
12
12
Step 6
Located holes in centre of beams(䑵and䑶)
*Place centre louver 䑼into 12th slot, lining up with the holes for 300x300cm
size.*
Place centre louver 䑼into 16th slot, lining up with the holes for 300x400cm.
Using M10 nut 䐣X2, secure the louver in place
Place Driving louver 䑽in line with 4th slot on the beam 䑵and䑶.
Fit all common louvers 䑻X21 for 300x300cm and 䑻X30 for 300x400cm size into
the remaining slots in the beams
Step 7
Fix 䑾x 2 (flat L-shaped aluminum profile).
ÂÂ