OYO Fitness Personal Gym Pro Operating and maintenance instructions

PRO QUICK START GUIDE
PERSONAL GYM PRO
CHARGE YOUR PRO
1
The USB charging port is located at the bottom of OYO
Personal Gym PRO unit. Use the included USB charging
cable to charge your PRO for two hours to get a full
charge prior to first use.
DOWNLOAD THE APP
2
Your PRO unit communicates with our OYO Coaching
App to track your reps and progress. The app is
available for free on iTunes for Apple iOS devices. To
download, go to iTunes on your device and search "OYO
Fitness". Once you have downloaded the app, follow the
account setup instructions.
During setup, choose OYO PERSONAL GYM PRO as
your model or your unit will not connect to the app. The
PRO must be awake to connect to the app (as indicated
by green LED light by USB port). If unit is not awake,
perform a rep or plug in USB charging cable.
Once you’ve set up your account, watch all in-app
tutorial videos.
Micro USB Cable Charge IndicatorMicro USB Port
CURRENTLY AVAILABLE ON APPLE iOS

TROUBLESHOOTING:
If you have trouble chaging your PRO, connecting to the
OYO Coaching App or have any other questions, please
visit: OYOFITNESS.COM/PRO-FAQ
GENERAL CARE:
BATTERY
The battery is designed to stay charged for about one
week, depending on frequency of use. We recommend
charging overnight at least once per week.
WAKING UP YOUR PRO
If you’ve used your PRO recently, lifting the PRO and
performing a rep will wake it up. If it’s been a little while,
your PRO may be in deep sleep mode. To wake from
deep sleep mode, plug into a USB outlet.
WARNINGS:
UNPLUG PRO BEFORE USE
Do not operate your PRO while it is plugged into an
outlet or while micro USB cable is attached.
DO NOT GET WET
This is an electronic product; getting wet will harm
internal components and will void any warranties.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
The antenna(s) must be installed such that a minimum separation
distance of at least 20 cm is maintained between the radiator
(antenna) and all persons at all times. This device must not be
co-located or operating in conjunction with any other antenna or
transmitter.
This equipment has been tested and found to comply with the limits
for Class B digital devices pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by one
or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.