OYPLA Home 4524 User manual
User Manual
USER MANUAL Model No: 4524
Cookie Press
•Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
•Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
•Use the correct fixings as indicated.
•Clean only with a damp cloth, do not use strong industrial cleaning substances.
•Do not carry out alterations or modifications to this product.
•This product contains small parts that can cause chocking, please keep out of
reach of children.
•This product is for domestic use only.
•Persons (including children) with reduced physical, sensory and mental capacities
or lack of experience and knowledge do not intend this product for use, unless
persons responsible for their safety have given them supervision or instruction
concerning use of the product.
•If the product is damaged or has any defects, please contact [email protected]m
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4524
USER MANUAL Model No:
USER MANUAL Model No: 4524
Operating Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
•8 Stainless Steel Icing Nozzles
•13 Stainless Steel Cookie Cutter Discs
•Stainless Steel Icing Gun
•Adjustable Trigger Action Nozzle
•Carry Case
Unlock the cylinder by pressing the
plunger release button located at the top
and simultaneously pulling the plunger
outwards.
Unscrew the ring on the cylinder. Fill the
cylinder of the gun by pressing in the
dough, ensuring that you do not leave any
air pockets. Choose one of the extrusion
dies to shape the biscuits and insert it inside
the ring. Firmly rescrew the ring onto the
cylinder
Hold gun vertically and very close to the
tray, which should not be buttered or
covered with baking paper, so as to allow
the dough, once extruded, to stick to the
tray and easily detach from the gun. Press
the handle all the way down until you hear
a click. Release the handle and shape the
biscuit directly onto the tray. Repeat until
all of the dough is used.
Use the piping nozzle holder to mount the
piping nozzle, filling the cylinder with royal
icing, buttercream, whipped cream or
various creams and custards. You can
follow step 3 to make decorations or simply
gently press down on the plunger to push
the cream out.
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4524
