Oypla Office 3704 User manual

Page 1
Manual Version: v1.0
Model Code: 3704
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3704
Contents
1Front Cover
-
2Safety
Instructions
-
2 Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Wall Mounted
Cigarette Bin
Cigarette Bin

Page 2
Manual Version: v1.0
Model Code: 3704
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2 Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product contains small parts that
could be a choking hazard if swallowed.
Keep these items away from children.
•This product should only be used for its
designated purpose.
•Before using the product, ensure all
fastenings are tightly in place and
everything is in order. This should be
checked periodically by an adult.
•The user is responsible for the mounting
and position on the cigarette bin.
•Ensure the cigarette is fully extinguished
before placing in the bin –if not, it could
create a fire hazard.
•Ensure the bin is emptied frequently –a
full bin could create a fire hazard.
•This product is intended for outdoor use
only.
•Do not carry out alterations or
modifications to this product.
•Clean only with a damp cloth. Do not use
strong industrial cleaning substances, as
these may damage the product.
•Keep fingers, loose clothing, hair and
jewellery away when emptying the
product, and/or folding/unfolding the
opening.
•When deposing the content within the
cigarette bin, please depose in an
environmentally friendly manner.
•If the product is damaged or defective,
please contact cserv[email protected]
⚠Ensure the bin is emptied frequently –
a full bin could create a fire hazard.
⚠Ensure all cigarettes are fully
extinguished before inserting them into the
bin. Failure to do so may create a fire hazard.
Warnings

Page 3
Manual Version: v1.0
Model Code: 3704
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
[email protected]
-Please be aware that you will be referring to this parts list throughout the
assembly process.
1 x Cigarette Bin
1 x Metal Ash Bin
3 x Washer
1 x Key
3 x Screw
3 x Wall Plug
Drill the three holes needed in the desired wall/surface based on the
measurements on the next page. Once you’ve drilled the holes in the wall,
push the wall plugs inside so when the screws are added they’ll be secure.
*Note –do not use a drill bit which is too large. Compare drill bit to the wall
plug to ensure it will fit snug.
*Note –ensure to check for any hidden cables/pipes in the wall before
proceeding with drilling.
Open the cigarette bin using the key provided, taking out the metal ash bin.
After this, secure the washers onto the wall, making sure they line up with the
holes in the cigarette bin.
Once done, place a screw into one of the holes in the cigarette bin, ensuring
it goes through both the bin and into the washer. Drill the screw into the wall,
ensuring not to tighten the screw too much, to avoid damaging the product.
Repeat this step for the remaining two holes. This will secure the cigarette
bin against the wall.
Slide the metal ash bin back into place, ensuring it locks into place by
overlapping the metal folds of the metal ash bin and cigarette bin.
Once the metal ash bin is secure, push the front of the cigarette bin back into
place and lock it. Keep the key, as this will allow you to empty the metal ash
bin. You are now able to use the cigarette bin. To empty the cigarette bin,
take one of the keys provided and unlock the front panel to gain access to the
ashtray within. Slide the ashtray out of the cigarette bin wall mount, and
empty the ashtray in an environmentally friendly way.
Contents
1Front Cover
-
2Safety
Instructions
-
2 Warnings
-
3Assembly
Instructions
-
4Back Cover
End
Assembly Instructions
1
2
3
4
5

Page 4
Manual Version: v1.0
Model Code: 3704
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2 Warnings
-
3Assembly
Instructions
-
4Back Cover
End